1 June 2017 in Journal of Water and Land Development
Paving blocks have been widely known as an alternative technology for reducing runoff discharge due to their infiltration performance and capability of retarding the flow. Surface configuration of the different paving blocks types and the openings area play important role in decreasing the runoff velocity. In this study, we investigated the surface runoff velocity on two types of paving blocks layers, and a smooth pavement as comparison. The paving blocks type were rectangular blocks, which have 3.2% openings ratio and hexagonal blocks, which have 6.5% openings ratio. We used a tilted plot covering area of 2 × 6 m, equipped by a rainfall simulator to accommodate the variation of surface slope and rainfall intensity. We measured the velocity by using modification of dye tracer and buoyancy method. The data were then tabulated and graphed based on the paving types and the surface slopes. Generally, the velocity-slope relationship has demonstrated that the increase in surface slope leads to the increase in velocity. In this study, the result showed that slope and rainfall intensity simultaneously influenced the velocity (F = 19.91 > Ftable = 5.14; P < 0.05). However, the findings of this study showed a weak relationship between the changes of surface slope and the changes of runoff velocity on the rectangular blocks (R2 = 0.38). The greater slope did not always invariably lead to the greater runoff velocity. It was likely that there was other predictor variable that was not identified before, and need to be further investigated.
1 January 2017 in AIP Conference Proceedings
In calibrating hydrological models, there are generally two stages of activity: 1) determining realistic model initial parameters in representing natural component physical processes, 2) entering initial parameter values which are then processed by trial error or automatically to obtain optimal values. To determine a realistic initial value, it takes experience and user knowledge of the model. This is a problem for beginner model users. This paper will present another approach to estimate the infiltration parameters in the tank model. The parameters will be approximated by the runoff coefficient of rational method. The value approach of infiltration parameter is simply described as the result of the difference in the percentage of total rainfall minus the percentage of runoff. It is expected that the results of this research will accelerate the calibration process of tank model parameters. The research was conducted on the sub-watershed Kali Bango in Malang Regency with an area of 239,71 km2. Infiltration measurements were carried out in January 2017 to March 2017. Analysis of soil samples at Soil Physics Laboratory, Department of Soil Science, Faculty of Agriculture, Universitas Brawijaya. Rainfall and discharge data were obtained from UPT PSAWS Bango Gedangan in Malang. Temperature, evaporation, relative humidity, wind speed data was obtained from BMKG station of Karang Ploso, Malang. The results showed that the infiltration coefficient at the top tank outlet can be determined its initial value by using the approach of the coefficient of runoff rational method with good result.
1 June 2018 in Journal of Water and Land Development
The aims of this study were to evaluate five infiltration models for mineral soils in the tropics with different land use types, such as settlements, plantations, rice fields, and forests. The infiltration models evaluated were Green–Ampt, Kostiakov, Kostiakov–Lewis, Philip, and Horton. The research was conducted at the Amprong watershed, Malang, Indonesia. The infiltration rate of the thirteen soil samples was analysed. The infiltration was tested using Turf-Tech infiltrometer. Moreover, each soil sample was tested in terms of the bulk density, specific gravity, porosity, soil moisture, and soil texture. The results of the study indicate that there is no significant difference (α = 5%) in the infiltration rate among the five models of infiltration. The infiltration rate in the study site was considered fast. Three models exhibiting the best performance are Kostiakov, Kostiakov–Lewis, and Horton model, respectively. The highest infiltration rate occurred in the forest land use while the lowest occurred in the rice field land use. The results of this study suggest that the infiltration model parameters correlate closely with the initial infiltration rate (fo) and the final infiltration rate (fc). In other words there is a correlation between the soil's ability to absorb water (representing the capillary force or horizontal flow) at the beginning of the infiltration (fo) and the gravity or the vertical flow upon reaching the final infiltration rate (fc).
19 July 2022 in Jurnal Teknologi dan Rekayasa Sumber Daya Air
The transformation of rain to discharge is a modeling process that converts rain data into discharge data. Discharge data in a watershed (DAS) is needed to determine the availability of water discharge in a river that will be used to meet the needs of living things around it. However, the availability of river flow data is often incomplete. Therefore, a change in the variety of rain to discharge is needed. This study aims to determine the results of the calculation of the conversion of rainfall into discharge at the Welang watershed location, Pasuruan Regency. The method used is the FJ. Mock and NRECA methods. The calculation results from these two methods will be compared with the AWLR data in the Welang watershed. From the results of the analysis, it was found that the most suitable method for calculating the transfer of rainfall into discharge in the Welang watershed is the FJ. Mock method with an NSE value of 0.629, a PBIAS value of 0.437, and a correlation coefficient (R) of 0.793. The use of the surrounding land influences the discharge condition in a watershed. The relationship between changes in land use and the condition of the annual average discharge of the Welang watershed shows that the discharge value tends to decrease in terms of comparisons in 2006, 2010, 2015, and 2020. Alih ragam hujan menjadi debit merupakan proses permodelan yang mengubah data hujan menjadi data debit. Data debit pada suatu daerah aliran sungai (DAS) diperlukan untuk mengetahui ketersediaan debit air pada suatu sungai yang akan dipergunakan untuk memenuhi kebutuhan makhluk hidup disekitarnya. Tapi pada kenyataannya ketersediaan data debit aliran sungai sering kali tidak lengkap, Maka dari itu dibutuhkan suatu alih ragam hujan menjadi debit. Pada studi ini bertujuan untuk mengetahui hasil perhitungan alih ragam hujan menjadi debit pada lokasi DAS Welang, Kabupaten Pasuruan. Metode yang digunakan adalah metode FJ. Mock dan NRECA. Hasil perhitungan dari kedua metode tersebut nantinya dibandingkan dengan data AWLR pada DAS Welang. Dari hasil analisis didapatkan bahwa metode yang paling sesuai untuk perhitungan alih ragam hujan menjadi debit pada DAS Welang adalah metode FJ. Mock dengan nilai NSE sebesar 0,629, nilai PBIAS sebesar 0,437 dan nilai koefisien korelasi (R) sebesar 0,793. Kondisi debit pada suatu DAS dipengaruhi oleh penggunaan lahan disekitarnya. Hubungan antara perubahan tata guna lahan dengan kondisi debit rerata tahunan DAS Welang menunjukkan nilai debit yang cenderung menurun, ditinjau dari perbandingan tahun 2006, 2010, 2015 dan 2020.
1 February 2024 in Journal of Ecological Engineering
The global database underscores Indonesia's scant 0.47% global contribution, of which 7.7% is from humid tropical climates. However, existing infiltration studies have primarily focused on specific soil textures and limited research points, resulting in a lack of comprehensive data. This...