This paper reports on characterization results of a single-photon avalanche diode (SPAD) array in standard CMOS 150nm technology. The array is composed by 25 (5 × 5) SPADs, based on p+/n-well active junction along with a retrograde deep n-well guard ring. The square-shaped SPAD has a 10µm active diameter and 15.6µm pitch size, achieving a 39.9% array fill factor. Characterization results show a good breakdown voltage uniformity (40mV max-min) within each chip and 17mV/°C temperature coefficient. The median DCR is 0.4Hz/µm2, and the afterpulsing probability is 0.85% for a dead time of 150ns at 3V excess bias voltage. The peak PDP is 31% at 450nm wavelength and a good uniformity (1.1% standard deviation) is observed for the array at 5V excess bias. The single SPADs exhibit a timing jitter of 52ps (FWHM) and 42ps (FWHM) under a 468-nm and a 831-nm laser, respectively. The crosstalk probability as a function of pixel-to-pixel distance and excess bias voltage is presented, and random telegraph signal (RTS) noise is also discussed in detail.
12 March 2018 in IEEE Transactions on Nuclear Science
Single-Photon Avalanche Diodes in CMOS technology are very attractive solution for photon detection due to the excellent timing resolution achievable. Unfortunately, such devices suffer from large values of the dark count pedestals. In this work we analyzed a test chip containing SPADs with different layouts, implemented in 150-nm CMOS technology. The behaviour of such devices has been investigated after proton irradiation. It is observed that, after irradiation, the Dark Count Rate switches between two or more discrete levels, phenomenon known as Random Telegraph Signal (RTS). The effect is related to the density and distribution of defects in the semiconductor lattice. RTS characteristics have been studied as function of both temperature and bias voltage. Discussion of results and main hypotheses on defect types responsible for RTS are reported.
2 April 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
In this brief, we present a 16 × 16-pixel quantum random number generator (QRNG) based on Single-Photon Avalanche Diodes, implemented in CMOS 150-nm technology. Each pixel consists of two detectors, featuring 17.2 μm ×7.7 μm size, and an arbiter, based on a phase comparator, enhancing the working range of the generator. The QRNG has achieved a random bit efficiency of 90% at a given observation window of 200 ns. The maximum speed is up to 18.2 Mbps for the whole array due to limited readout capability. The measurement result shows the random numbers can pass the standard randomness test without any post-processing.
A Quantum Random Number Generator (QRNG) based on the detection of the arrival time of photons is presented. A stochastic model of the QRNG prototype is derived, showing its consistency with output data sets, in order to estimate the entropy produced by the device. Experimental data, in accord with the model, demonstrates the robustness of the approach versus possible variations of external parameters such as temperature or intensity of the light.
Cross-talk characterization results of high-fill-factor single-photon avalanche diode (SPAD) arrays in CMOS 150-nm technology are reported and discussed. Three different SPAD structures were designed with two different sizes (15.6 and pitch) and three guard ring widths (0.6, 1.1, and ). Each SPAD was implemented in an array, composed of 25 () devices, which can be separately activated. Measurement results show that the average cross-talk probability is well below 1% for the shallow-junction SPAD structure with pitch and 39.9% fill factor, and 1.45% for the structure with pitch and 60.6% fill factor. An increase of cross-talk probability with the excess bias voltage is observed.