Different electronic devices nowadays exploit random number generators either to create the seed for simulations, for gaming or to encrypt the communications. Particularly for cryptography applications, there is an increasing effort to realize a truly random number generator, based not on mathematical algorithms but exploiting randomness of physical processes. Among them quantum processes, provide intrinsic unpredictability, for example exploiting the arrival time, the number or the properties of photons. In this work we focus on photonic quantum random number generator (QRNG), and we analyze different approaches and different extraction methods to realize a fully integrated, CMOS compatible, QRNG with photon-emitter realized on the same chip and very close to the detectors of single photons. Non-idealities of the emitter and the detector have to be studied and depends on the structure. They can be mitigated with robust extraction methods which however should not introduce complex algorithms or secondary entropy sources that can make the device no more quantum based. The ultimate goal is to realize a CMOS building block that can be implemented as building block, with low power consumption and robust to environment conditions.
A front-side illuminated array of 50×40 Single-Photon Avalanche Diode pixels for single point distance measurement is implemented in a 0.15 μm CMOS technology, showing a pixel size of 38.5×33.5 μm2 with variable fill factor from 4.8% to 15.3%. In order to improve the signal to background ratio, the sensor embeds a procedure for on-the-fly identification of the laser spot position in the active area. A programmable 5×5 Region-of-Interest can be connected, through a reconfigurable switching matrix, to 25 TDCs with 11-bit and 48ps resolution for timing measurement. Thanks to the adopted approach, the detector, working with a 650 nm pulsed laser with an average power of just 40 μW, can reliably measure up to 7.5 m achieving a best precision lower than 1.6 mm at 3 m and working under 7 klux background at 1kHz rate. The sensor is shown to work up to 18klux of background light with best precision lower than 4 mm at 3m.
We present an implementation of a semi-device-independent protocol of the generation of quantum random numbers in a fully integrated silicon chip. The system is based on a prepare-and-measure scheme, where we integrate a partially trusted source of photons and an untrusted single photon detector. The source is a silicon photomultiplier, which emits photons during the avalanche impact ionization process, while the detector is a single photon avalanche diode. The proposed protocol requires only a few and reasonable assumptions on the generated states. It is sufficient to measure the statistics of generation and detection in order to evaluate the min-entropy of the output sequence, conditioned on all possible classical side information. We demonstrate that this protocol, previously realized with a bulky laboratory setup, is totally applicable to a compact and fully integrated chip with an estimated throughput of 6 kHz of the certified quantum random bit rate.
3 April 2019 in IEEE Transactions on Circuits and Systems II: Express Briefs
We present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a Single-Photon Avalanche Diode (SPAD) and a Field Programmable Gate Array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for 2nd order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.
A Quantum Random Number Generator (QRNG) based on the detection of the arrival time of photons is presented. A stochastic model of the QRNG prototype is derived, showing its consistency with output data sets, in order to estimate the entropy produced by the device. Experimental data, in accord with the model, demonstrates the robustness of the approach versus possible variations of external parameters such as temperature or intensity of the light.
1 January 2014 in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment