Maximum power point tracking (MPPT) enhances the efficiency of solar photovoltaic (PV) systems by ensuring optimal power extraction under varying conditions. MPPT is implemented in solar charge controllers or hybrid inverters connected to PV arrays. The current-voltage (IV) curve, influenced by temperature and irradiance fluctuations, becomes more complex under partial shading, causing multiple local maxima and reducing efficiency. This study proposes an MPPT technique using the Archimedes optimization algorithm (AOA), a novel metaheuristic inspired by Archimedes' principle. The AOA-based MPPT integrates a DC/DC buck converter controlled by an STM32 microcontroller to address challenges in complex shading conditions. Comparative analysis demonstrates the AOA's superiority in achieving high efficiency and fast convergence. The AOA-based MPPT achieved an average efficiency of 93.17% across shading scenarios, outperforming PSO (87.04%) and non-MPPT systems (84.56%). It also exhibited faster average tracking times of 90.5 ms compared to PSO's 100.5 ms, ensuring robust and reliable performance. These results confirm the effectiveness of the AOA-based method in maximizing energy harvesting in real-world PV applications.
8 December 2024 in Jurnal Layanan Masyarakat (Journal of Public Services)
This article discusses community service activities on Gili Iyang Island, Sumenep, Madura, which focus on implementing appropriate technology in sensing the potential of renewable energy sources. Gili Iyang Island itself is an area that actively encourages the use of renewable energy. In this activity, maintenance and monitoring of data on AirFeel are carried out, including device checks and monitoring data accuracy levels through periodic calibration. Airfeel is used as a weather station to measure the potential of renewable energy, especially wind and solar energy. The potential for wind energy is considered from the speed and direction of the wind, while the potential for solar energy is considered from the level of solar irradiation. These parameters allow Airfeel to determine the optimal location for renewable energy generation based on weather conditions. Additionally, the DJI Phantom 4 Pro RTK drone was used for 3D Mapping Photogrammetry. This technology aids in creating three-dimensional maps that are considered in the planning and development of renewable energy power plants at the location. Implementing these two technologies can contribute to future planning for developing other renewable energy sources in Gili Iyang Island.