Differential 3-stage and 5-stage, ring oscillator based capacitance sensors were designed and integrated using 0.35 μm CMOS technology. The sensor operates at 0.7 GHz and 1.4 GHz and achieves ~14 aF capacitive sensitivity. The use of CMOS technology makes the integration of the sensing circuit, and the detection microelectrodes on chip possible. A hybrid system was developed where a Plexiglas microfluidic system was mounted on top of the CMOS chip. This created a complete Lab-on-Chip cytometer sensor that was used to detect individual polystyrene spheres (10-15 μm) and Chinese hamster ovary (CHO) cells. The integration of sensing circuitry with the microfluidic parts reduces the sensor size and weight significantly when compared with previous designs.
A novel biasing scheme having the potential to dynamically control the effective cavity heights of two fabricated, multiple moving membrane capacitive micromachined ultrasonic transducers (M 3 -CMUTs) has been developed. With this unique approach it is may be possible to avoid design trade-off requirements of the ultrasonic transducers that affect both receiving and transmitting operating modes. Each of these M 3 -CMUTs has two vibrating membranes suspended over a fixed bottom electrode. The two air-coupled M 3 -CMUT devices with the resonant frequencies of 1MHz single cell and 1.5MHz array device were fabricated. Finite Element Analysis (FEA) was carried out to investigate the effect of an additional middle membrane on the effective cavity height and device performance. Experimental validation was then completed with the transducers operating under both positive and negative biasing conditions of middle membrane, while keeping the top membrane at selected positive biasing voltages to realize a dynamically controlled range of effective cavity heights. The new biasing scheme may facilitate dynamic tunning of resonant frequencies of transmitter and receiver transducers through the variation of effective cavity height for improved performance.
The development of chemically diverse arrays of sensing elements has gained the attention of researchers due to their anticipated capacity to mimic the function of olfactory receptors in the mammalian olfactory system.