Haleh Nazemi

Dr. Haleh Nazemi

ECE, University of Windsor, Windsor, Ontario, Canada
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2019 in Sensors
Verified
Journal Article
Open access
PDF file
HNHaleh Nazemi
Haleh Nazemi
AJAashish Joseph
Aashish Joseph
JPJaewoo Park
Jaewoo Park
AEArezoo Emadi
Arezoo Emadi
Micro- and nano-sensors lie at the heart of critical innovation in fields ranging from medical to environmental sciences. In recent years, there has been a significant improvement in sensor design along with the advances in micro- and nano-fabrication technology and the use of newly designed materials, leading to the development of high-performance gas sensors. Advanced micro- and nano-fabrication technology enables miniaturization of these sensors into micro-sized gas sensor arrays while maintaining the sensing performance. These capabilities facilitate the development of miniaturized integrated gas sensor arrays that enhance both sensor sensitivity and selectivity towards various analytes. In the past, several micro- and nano-gas sensors have been proposed and investigated where each type of sensor exhibits various advantages and limitations in sensing resolution, operating power, response, and recovery time. This paper presents an overview of the recent progress made in a wide range of gas-sensing technology. The sensing functionalizing materials, the advanced micro-machining fabrication methods, as well as their constraints on the sensor design, are discussed. The sensors’ working mechanisms and their structures and configurations are reviewed. Finally, the future development outlook and the potential applications made feasible by each category of the sensors are discussed.

25 November 2022 in Sensors
Verified
Journal Article
Open access
PDF file
YBYumna Birjis
Yumna Birjis
SSSiddharth Swaminathan
Siddharth Swaminathan
HNHaleh Nazemi
Haleh Nazemi
GCGian Carlo
Gian Carlo
PMPavithra Munirathinam
Pavithra Munirathinam
AEArezoo Emadi
Arezoo Emadi
With the development of technology, systems gravitate towards increasing in their complexity, miniaturization, and level of automation. Amongst these systems, ultrasonic devices have adhered to this trend of advancement. Ultrasonic systems require transducers to generate and sense ultrasonic signals. These transducers heavily impact the system’s performance. Advancements in microelectromechanical systems have led to the development of micromachined ultrasonic transducers (MUTs), which are utilized in miniaturized ultrasound systems. Piezoelectric micromachined ultrasonic transducers (PMUTs) exhibit higher capacitance and lower electrical impedance, which enhances the transducer’s sensitivity by minimizing the effect of parasitic capacitance and facilitating their integration with low-voltage electronics. PMUTs utilize high-yield batch microfabrication with the use of thin piezoelectric films. The deposition of thin piezoelectric material compatible with complementary metal-oxide semiconductors (CMOS) has opened novel avenues for the development of miniaturized compact systems with the same substrate for application and control electronics. PMUTs offer a wide variety of applications, including medical imaging, fingerprint sensing, range-finding, energy harvesting, and intrabody and underwater communication links. This paper reviews the current research and recent advancements on PMUTs and their applications. This paper investigates in detail the important transduction metrics and critical design parameters for high-performance PMUTs. Piezoelectric materials and microfabrication processes utilized to manufacture PMUTs are discussed. Promising PMUT applications and outlook on future advancements are presented.

14 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Calvin LoveCalvin Love
Calvin Love
HNHaleh Nazemi
Haleh Nazemi
EEEman El-Masri
Eman El-Masri
KAKenson Ambrose
Kenson Ambrose
MFMichael S. Freund
Michael S. Freund
AEArezoo Emadi
Arezoo Emadi
This work is a comprehensive review of sensing materials, which interact with several target gases pertinent to agricultural monitoring applications. Sensing materials which interact with carbon dioxide, water vapor (relative humidity), hydrogen sulfide, ethylene and ethanol are the focus of this work. Performance characteristics such as dynamic range, recovery time, operating temperature, long-term stability and method of deposition are discussed to determine the commercial viability of the sensing materials considered in this work. In addition to the sensing materials, deposition methods are considered to obtain the desired sensing material thickness based on the sensor’s mechanism of operation. Various material classes including metal oxides, conductive polymers and carbon allotropes are included in this review. By implementing multiple sensing materials to detect a single target analyte, the issue of selectivity due to cross sensitivity can be mitigated. For this reason, where possible, it is desirable to utilize more than one sensing material to monitor a single target gas. Among those considered in this work, it is observed that PEDOT PSS/graphene and TiO2-coated g-C3N4 NS are best suited for CO2 detection, given their wide dynamic range and modest operating temperature. To monitor the presence of ethylene, BMIM-NTf2, SWCNTs and PtTiO2 offer a dynamic range most suitable for the application and require no active heating. Due to the wide dynamic range offered by SiO2/Si nanowires, this material is best suited for the detection of ethanol; a gas artificially introduced to prolong the shelf life of the harvested crop. Finally, among all other sensing materials investigated, it observed that both SWCNTs and CNTs/SnO2/CuO are most suitable for H2S detection in the given application.

3 April 2020 in Sensors
Verified
Journal Article
Open access
PDF file
HNHaleh Nazemi
Haleh Nazemi
JBJenitha Antony Balasingam
Jenitha Antony Balasingam
SSSiddharth Swaminathan
Siddharth Swaminathan
KAKenson Ambrose
Kenson Ambrose
MNMuhammad Umair Nathani
Muhammad Umair Nathani
AEArezoo Emadi
Arezoo Emadi
Microelectromechanical system (MEMS)-based mass sensors are proposed as potential candidates for highly sensitive chemical and gas detection applications owing to their miniaturized structure, low power consumption, and ease of integration with readout circuits. This paper presents a new approach in developing micromachined mass sensors based on capacitive and piezoelectric transducer configurations for use in low concentration level gas detection in a complex environment. These micromachined sensors operate based on a shift in their center resonant frequencies. This shift is caused by a change in the sensor’s effective mass when exposed to the target gas molecules, which is then correlated to the gas concentration level. In this work, capacitive and piezoelectric-based micromachined sensors are investigated and their principle of operation, device structures and configurations, critical design parameters and their candidate fabrication techniques are discussed in detail.

3 May 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Youssef Ezzat Youssef ElnemrYoussef Ezzat Youssef Elnemr
Youssef Ezzat Youssef Elnemr
AAAya Abu-Libdeh
Aya Abu-Libdeh
GCGian Carlo
Gian Carlo
YBYumna Birjis
Yumna Birjis
HNHaleh Nazemi
Haleh Nazemi
AEArezoo Emadi
Arezoo Emadi
Conventional sensor systems employ single-transduction technology where they respond to an input stimulus and transduce the measured parameter into a readable output signal. As such, the technology can only provide limited corresponding data of the detected parameters due to relying on a single transformed output signal for information acquisition. This limitation commonly results in the need for utilizing sensor array technology to detect targeted parameters in complex environments. Multi-transduction-mechanism technology, on the other hand, may combine more than one transduction mechanism into a single structure. By employing this technology, sensors can be designed to simultaneously distinguish between different input signals from complex environments for greater degrees of freedom. This allows a multi-parameter response, which results in an increased range of detection and improved signal-to-noise ratio. In addition, utilizing a multi-transduction-mechanism approach can achieve miniaturization by reducing the number of required sensors in an array, providing further miniaturization and enhanced performance. This paper introduces the concept of multi-transduction-mechanism technology by exploring different candidate combinations of fundamental transduction mechanisms such as piezoresistive, piezoelectric, triboelectric, capacitive, and inductive mechanisms.

10 June 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
YBYumna Birjis
Yumna Birjis
HNHaleh Nazemi
Haleh Nazemi
JPJaewoo Park
Jaewoo Park
AEArezoo Emadi
Arezoo Emadi
Piezoelectric micromachined ultrasonic transducers (PMUTs) traditionally operate at a single frequency, requiring physical modifications to alter their operational frequency. In ultrasonic applications such as diagnostic imaging, the working frequency is critical in determining resolution and detection range. Dual-electrode PMUTs present a promising alternative to conventional designs, enabling multi-frequency operation by activating distinct resonant modes through tailored electrode configurations and actuations. This study details the design, fabrication, and characterization of three dual-electrode PMUT geometries: circular, square, and rectangular membranes. Fabricated using the PiezoMUMPs process, these geometries feature identical material properties and membrane areas. Their electromechanical performance was evaluated through finite element simulations and experimental methods, focusing on metrics such as electromechanical coupling coefficient (EMCC), resonant frequencies, and membrane displacement. A comparative performance analysis across the geometries is presented. Multi-frequency operation was achieved using a dual-electrode configuration with an outer ring electrode and an inner disk electrode, allowing independent activation of two resonant modes. These findings highlight the potential of dual-electrode PMUTs to enhance multi-frequency operation, especially in ultrasonic imaging and related applications.