29 August 2017 in The Journal of Physical Chemistry C
19 July 2017 in Physical Review Materials
The severe local lattice distortion, induced mainly by the large atomic size mismatch of the alloy components, is one of the four core effects responsible for the unprecedented mechanical behaviors of high-entropy alloys (HEAs). In this work, we propose a supercell model, in which every lattice site has similar local atomic environment, to describe the random distributions of the atomic species in HEAs. Using these supercells in combination with calculations, we investigate the local lattice distortion of refractory HEAs with body-centered-cubic structure and HEAs with face-centered-cubic structure. Our results demonstrate that the local lattice distortion of the refractory HEAs is much more significant than that of the HEAs. We show that the atomic size mismatch evaluated with the empirical atomic radii is not accurate enough to describe the local lattice distortion. Both the lattice distortion energy and the mixing entropy contribute significantly to the thermodynamic stability of HEAs. However the local lattice distortion has negligible effect on the equilibrium lattice parameter and bulk modulus.
24 August 2005 in Applied Physics Letters
Here we report a non-toxic β-type titanium alloy exhibiting unstable elastic and plastic deformation behavior. Elastic instability leads to remarkable elastic softening, i.e., the decrease of incipient Young’s modulus with slight pre-straining. In spite of partial recovery during room-temperature aging, a stable modulus of 33GPa matching that of human bone can be maintained. Plastic instability causes highly-localized deformation which is very effective in grain refinement but contributes little to strength. We thus obtain soft nanostructured metallic materials (NMMs): The flow stress increases by only ∼5.5% as coarse grains are reduced to below 50nm, in contrast with several times increase for previously-reported NMMs.
1 March 2017 in Acta Materialia
1 August 2011 in Acta Materialia
1 August 2018 in Surface Science