Memories occupy most of the silicon area in nowadays' system-on-chips and contribute to a significant part of system power consumption. Though widely used, nonvolatile Flash memories still suffer from several drawbacks. Magnetic random access memories (MRAMs) have the potential to mitigate most of the Flash shortcomings. Moreover, it is predicted that they could be used for DRAM and SRAM replacement. However, they are prone to manufacturing defects and runtime failures as any other type of memory. This article provides an up-to-date and practical coverage of MRAM test and reliability solutions existing in the literature. After some background on existing MRAM technologies, defectiveness and reliability issues are discussed, as well as functional fault models used for MRAM. This article is dedicated to a summarized description of existing test and reliability improvement methods developed so far for various MRAM technologies. The last part of this article gives some perspectives on this hot topic.
In this article, we propose a carbon nanotube (CNT) field-effect transistor (CNFET)-based static random access memory (SRAM) design at the 5-nm technology node that is optimized based on the tradeoff between performance, stability, and power efficiency. In addition to size optimization, physical model parameters including CNT density, CNT diameter, and CNFET flat band voltage are evaluated and optimized for CNFET SRAM performance improvement. Optimized CNFET SRAM is compared with state-of-the-art 7-nm FinFET SRAM cell based on Arizona State University [ASAP 7-nm FinFET predictive technology models (PTM)] library. We find that the read, write EDPs, and static power of the proposed CNFET SRAM cell are improved by 67.6%, 71.5%, and 43.6%, respectively, compared with the FinFET SRAM cell, with slightly better stability. CNT interconnects both inside and in-between CNFET SRAM cells are considered to compose an all-carbon-based SRAM (ACS) array which will be discussed in the Part II of this article. A 7-nm FinFET SRAM cell with copper interconnects is implemented and used for comparison.
5 January 2018 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
The STT-MRAM technology is a promising candidate for future on-chip cache memory because of its high density, low standby power, and nonvolatility. As the technology node scales, especially under 40-nm technology node, STT-MRAM cell design becomes a key issue to approach low power consumption, high access performance, and desirable reliability. The conventional 1T-1 magnetic tunnel junction (MTJ) and 2T-2MTJ cell designs cannot address these challenges efficiently. In this paper, we propose a novel 3T-3MTJ cell structure using the advanced perpendicular MTJ (p-MTJ) technology. It can store 2 bits with three MTJs. The differential sensing technique can be used to read out the most significant bit as fast as the 2T-2MTJ design. The sensing latency of 2 bits within the same cell is almost the same as the sensing latency of the 1T-1MTJ cell design. Therefore, the 3T-3MTJ cell can have the advantages of both 2T-2MTJ and 1T-1MTJ cells. Circuit-level simulations show that the proposed 3T-3MTJ cell structure can achieve a desirable tradeoff between storage density, access performance, and energy consumption compared to the prior 1T-1MTJ and 2T-2MTJ cell structures. Additionally, we propose a novel adaptive cache design based on the 3T-3MTJ cell structure, which can work in different modes to satisfy various memory access demands from different applications. Architecture level simulations validate the effectiveness of the proposed cache design.
13 May 2019 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Considering the insatiable demand for high-performance computing, on-chip cache capacity increases rapidly. Spin-transfer-torque magnetoresistive random-access memory (STT-MRAM) is a promising cache candidate due to ultralow standby power, high-access speed, and integration density. Unfortunately, when the feature size of magnetic tunnel junction (MTJ) scales down to 1 Xnm, read current approaches write current closely, which may result in read disturbance threatening the reliability of STT-MRAM. Furthermore, the elevating on-chip temperature reduces the thermal stability of STT-MRAM remarkably and aggravates the read disturbance. Error correction code (ECC) is an effective technique to enhance memory reliability. In this paper, we take advantage of the thermal dependence of STT-MRAM and propose a thermally adaptive ECC design, called “Chameleon,” that can adjust the ECC protection strength dynamically to reduce the ECC storage overhead and improve the cache access performance and energy efficiency. Experimental results show that compared to the conservative nonadaptive ECC scheme, our design can improve both cache performance and energy consumption effectively.