21 March 2018 in The International Journal of Advanced Manufacturing Technology
6 June 2022 in Applied Physics Letters
With the development of neuromorphic electronics, much effort has been devoted to the design and manufacture of synaptic electronic devices with large scale and cost-efficient. In this paper, an In2O3 synaptic transistor array gated by screen-printed ion-gel was demonstrated. Due to the ion-gel/Al2O3 stacked gate dielectric, all devices on the array achieved a large hysteresis window of >1 V, a steep back sweep subthreshold swing of <60 mV/decade, and a nonvolatile memory behavior, showing that the screen-printed ion-gel has satisfactory uniformity in large scale. In addition, short-term to long-term plasticity, paired-pulse facilitation, and spike-rate-dependent plasticity are simulated. Based on the plasticity regulated with the spike frequency, a high-pass filter was realized. Flash memory as a special memory model in the nervous system has been simulated in the array. This study provides a unique platform for designing high-performance, repeatable, and stable artificial synapses for the neuromorphic system.
15 August 2022 in Applied Physics Letters
High-k dielectrics are frequently used for organic thin-film transistors (OTFTs), which facilitate the reduction of the device's operating voltage and enhance the total electrical performance. Along these lines, in this work, the fabrication of high-k AlOx dielectrics with high capacitance and low leakage current is proposed. On top of that, low-voltage flexible OTFTs with a solution-processed 2,7-dioctyl benzothieno[3,2-b] benzothiophene channel layer were demonstrated. The AlOx dielectric film was deposited by employing the reactive magnetron sputtering technique from a metal Al target by using a gas mixture of Ar and O2 at room temperature. At the same time, the surface morphology of the semiconductor film was optimized by controlling the solid solubility of polystyrene and polymethyl methacrylate in the semiconductor solution, which is important for improving the device performance. In this way, the prepared flexible OTFTs showed a low operating voltage of 3 V, a high switch ratio of 4.2 × 107, a high mobility is 2.39 cm2/V s, and a steep subthreshold swing close to the theoretical limit of 68 mV/decade. It is, thus, expected that this method will be applicable to the development of high-performance OTFTs.
1 September 2023 in Applied Physics Reviews
Flexible thin-film transistors (f-TFTs) not only attract research attention but also possess significant application potential in various fields, such as consumer electronics, human–machine interfaces, healthcare, multipurpose sensors, and logic circuits. Printing is one of the most appealing technologies for fabricating f-TFTs owing to its low cost, suitability for large-scale fabrication, and possibility to be customized under non-vacuum conditions. Significant advancements have been achieved in the printing of f-TFTs regarding several aspects, including printing techniques, printable materials, device performance, and applications, which are summarized and discussed here. Specifically, this review focuses on the recent developments achieved regarding four typical materials commonly used in printed f-TFTs: low-dimensional materials, carbon-based materials, organic materials, and metal-oxide materials. Furthermore, the actual applications of printed f-TFTs are discussed to highlight the issues in contemporary research, and future outlook and prospects regarding the development of printed f-TFTs are provided.
10 July 2023 in Applied Physics Letters
Artificial intelligence technology has fueled the requirement for flexible hardware. Although flexible electronic devices have become promising candidates in recent years, they inevitably face problems like performance degradation caused by deformation. In this paper, we report a stable performance and flexible indium tin oxide synaptic transistor with an ultralow back-sweep subthreshold swing of 28.52 mV/dec, which is ascribed to the positive charge trapping/de-trapping effect introduced by a naturally oxidized Al2O3 layer. Even after bending 1 × 103 times, the flexible artificial synapse shows stable electrical performance without evident attenuation. Furthermore, the synaptic transistor exhibits good compatibility with an external thin-film pressure sensor, and their combination empowers the device to realize tactile sensing, which can achieve the function of Braille code recognition. Evidently, the reported flexible synaptic transistor demonstrates its potential for artificial perception processing.
9 January 2013 in IEEE Electron Device Letters
Junctionless low-voltage transparent indium-zinc-oxide (IZO) thin-film transistors (TFTs) gated by SiO2-based solid electrolyte films are fabricated on glass substrates by a full room-temperature process. The attractive feature of such TFTs is that the channel and source/drain electrodes are the same ultrathin IZO film without any source/drain electrodes. The operation mode of such devices can be tuned from depletion mode to enhancement mode when the thickness of the IZO film is reduced from 30 to 10 nm. Devices operated in both modes show a small subthreshold swing of <; 120 mV/dec and a large current on/off ratio of >; 106.