Experimentally generated and simulated soft x-ray plasma images and spectra from 1064 nm-driven laser-produced plasmas from slab tin are presented. Produced are small, micrometer-scale emission volumes with principle imaged emission lying between 1.2 and 2.5 nm. Experimental images of the soft x-ray emission of these plasmas are generated using a pinhole imaging system, which enables spatial characterization of the plasmas, and a simple transmission grating spectrometer with a 100 nm pitch grating is used to facilitate the spectral characterization of these plasmas. Plasmas are simulated under similar experimental conditions to those used with the single-fluid, single-temperature radiation-hydrodynamics code RALEF-2D. Coupling the simulation output with optical modeling methods demonstrates its promise as a capability for modeling the spatial and spectral behavior of soft x-ray-emitting tin plasmas at such scales and laser energies.
Spectroscopy is a fundamental tool in characterizing laser-produced plasmas. In this article, the design and deployment of a centimeter-scale soft x-ray transmission grating spectrometer that utilizes a commercial Complementary Metal–Oxide–Semiconductor (CMOS) detector are discussed in detail. This spectrometer was designed to facilitate the spectral characterization of micrometer-scale soft x-ray emitting laser-produced plasmas with a short working path length. A free-standing silicon nitride transmission grating with a pitch of 100 nm, a working width of 5 μm, and an effective length of 3 mm is utilized in conjunction with precision scale machining and 3D printing techniques to construct the device. With the spectrometer, spectral images are produced, showing emission features in the 1–3 nm region from multiple atomic targets. We present these results compared to spectra recorded with a higher-resolution spectrometer and also investigate the utility of photon counting based spectroscopy, whereby the energy dependent response of the CMOS detector itself is utilized. The spectrometer impulse response function is modeled using the Fresnel diffraction integral, with a fixed grating aperture. Simulated spectra are produced using FLYCHK, a dimensionless collisional radiative model for the laser-produced plasma, which serves as a model input to test the veracity of the optical modeling. In addition to developing a compact and affordable spectrometer, a primary motivation behind this device was to record spectral data from laser plasma emission in high pressure helium environments, and data are presented on this.
14 October 2025 in Journal of Physics D: Applied Physics
In this study, we report advances in experimental imaging and diffraction modeling methods to measure and accurately infer laser-produced plasma (LPP) emission spatial dimensions as small as 5 µ m in the soft x-ray (SXR) region between 1–3 nm. Small-scale SXR emission volumes were generated from the irradiation of molybdenum with a high peak power Nd:YAG laser. Computational fitting methods coupled with direct diffraction models enabled precise measurement of the plasma size by removing blurring inherent to the imaging system. The techniques demonstrated here can be applied to research in determining the SXR emission size of LPPs, which is essential for calculating LPP source radiance; this is a key parameter in imaging, spectroscopy and patterning applications where LPP SXR emission is of significant utility and interest.