24 March 2022 in Journal of Lightwave Technology
We investigate quality of transmission (QoT) estimation in a multi-band transmission scenario, including a wideband description of the frequency-dependent physical layer parameters and a disaggregated QoT estimation approach.In particular, we use experimentally-derived erbium- and thulium-doped fiber amplifier operational data, and simulate the generation of the nonlinear interference (NLI) noise by comparing implementations of the split-step Fourier method, the generalized Gaussian noise (GGN) model implemented in the open-source GNPy library, and an efficient approximation that provides accurate results in a limited computational time. The latter semi-analytical solution is obtained by approaching the Manakov equation from a disaggregated standpoint, including the power transfer induced by stimulated Raman scattering, along with the frequency-dependent evolution of the fiber parameters of loss, dispersion and the nonlinearity coefficient. We validate the proposed approximation within a C+L+S 400 G transmission scenario and investigate 21 channels under test that are equally spaced along the three bands.
23 June 2023 in IEEE Transactions on Network and Service Management
Optical communications and networking are fast becoming the solution to support ever-increasing data traffic across all segments of the network, expanding from core/metro networks to 5G/6G front-hauling. Therefore, optical networks need to evolve towards an efficient exploitation of the infrastructure by overcoming the closed and aggregated paradigm, to enable apparatus sharing together with the slicing and separation of the optical data plane from the optical control. In addition to the advantages in terms of efficiency and cost reduction, this evolution will increase network reliability, also allowing for a fine trade-off between robustness and maximum capacity exploitation. In this work, an optical network architecture is presented based on the physical layer digital twin of the optical transport used within a multi-layer hierarchical control operated by an intent-based network operating system. An experimental proof of concept is performed on a three-node network including up to 1000 km optical transmission, open re-configurable optical add & drop multiplexers (ROADMs) and whitebox transponders hosting pluggable multirate transceivers. The proposed solution is based on GNPy as the optical physical layer digital twin and ONOS as intent-based network operating system. The reliability of the optical control decoupled by the data plane functioning is experimentally demonstrated exploiting GNPy as open lightpath computation engine and software optical amplifier models derived from the component characterization. Besides the lightpath deployment exploiting the modulation format evaluation given a generic traffic request, the architecture reliability is tested mimicking the use case of an automatic failure recovery from a fiber cut.
27 May 2021 in Journal of Optical Communications and Networking
In the direction of disaggregated and cognitive optical networks, this work proposes and experimentally tests a vendor-agnostic optical line controller architecture capable of autonomously setting the working point of optical amplifiers to maximize the capacity of a ROADM-to-ROADM (reconfigurable optical add–drop multiplexer) link. From a procedural point of view, once the equipment is installed, the presented software framework performs an automatic characterization of the line, span by span, to abstract the properties of the physical layer. This process requires the exploitation of monitoring devices such as optical channel monitors and optical time domain reflectometers, available, in a future perspective, in each amplification site. On the basis of this information, an optimization algorithm determines the working point of each amplifier to maximize the quality of transmission (QoT) over the entire band. The optical line controller has been experimentally tested in the laboratory using two different control strategies, achieving in both cases a homogeneous QoT for each channel close to the maximum average and an excellent match with respect to emulation results. In this framework, the Gaussian noise simulation in Python (GNPy) open source Python library is used as the physical model for optical propagation through the fiber, and the covariance matrix adaptation evolution strategy is used as an optimization algorithm to identify properties of each fiber span and to maximize the link capacity.
1 February 2022 in IEEE Photonics Technology Letters
In this work, a cognitive Raman amplifier controller using an evolutionary optimization strategy for both in-field device calibration and optimal pump power configuration design is presented. The conceived methodology allows to jointly characterize the physical layer properties of the optical fiber span, such as the fiber attenuation profile, the entities of the lumped losses due to mechanical connectors or splices, the polarization coefficients between each Raman pump pair and the Raman efficiency curve. The developed framework expects to work using optical channel monitors (OCMs) as telemetry device and it has been experimentally validated, obtaining outstanding results in terms of precision on a C-band setup.
19 March 2021 in IEEE Open Journal of the Communications Society
Increasing traffic demands are causing network operators to adopt disaggregated and open networking solutions to better exploit optical transmission capacity, and consequently enable a software-defined networking (SDN) approach to control and management that encompasses the WDM data transport layer. In these frameworks, a quality of transmission estimator (QoT-E) that gives the generalized signal-to-noise ratio (GSNR) is commonly used to compute the feasibility of transparent lightpaths (LP)s, taking into account the amplified spontaneous emission (ASE) noise and the nonlinear interference (NLI). In general, the ASE noise is the main contributor to the GSNR and is also the most challenging noise component to evaluate in a scenario with varying spectral loads, due to fluctuations in the optical amplifier responses. In this work, we propose a machine learning (ML) algorithm that is trained using different ASE-shaped spectral loads in order to predict the OSNR component of the GSNR; this methodology is subsequently used in combination with a QoT-E in the lightpath computation engine (L-PCE). We present an experiment on a point-to-point optical line system (OLS), including 9 commercial erbium-doped fiber amplifiers (EDFA)s used as black-boxes, each with variable gain and tilt values, and 8 fibers that are characterized by distinct physical parameters. Within this experiment, we receive the signal at the end of the OLS, measuring the bit-error-rate (BER) and the power spectrum, over 2520 different spectral loads. From this dataset, we extract the expected GSNRs and their linear and nonlinear components. Through joint application of a ML algorithm and the open-source GNPy library, we obtain a complete QoT-E, demonstrating that a reliable and accurate LP feasibility predictor may be implemented.