Kaitian Zhang

Kaitian Zhang

Auto-generated profile, based on publicly available information

Kaitian Zhang

Department of Electrical and Computer Engineering, The Ohio State University 1 , Columbus, Ohio 43210

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
YZYuxuan Zhang
Yuxuan Zhang
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
KZKaitian Zhang
Kaitian Zhang
Hongping ZhaoHongping Zhao
Hongping Zhao
Background carbon (C) impurity incorporation in metalorganic chemical vapor deposition (MOCVD) grown gallium nitride (GaN) represents one of the major issues in further improving GaN vertical power device performance. This work presents a laser-assisted MOCVD (LA-MOCVD) technique to address the high-C issue in MOCVD homoepitaxial GaN under different growth rate (Rg) regimes and studies the correlations between [C] and Rg. [C] in LA-MOCVD GaN is reduced by 50%–90% as compared to the conventional MOCVD GaN for a wide growth rate range between 1 and 16 μm/h. A mass-transport based model is developed to understand the C incorporation at different Rg regimes. The results obtained from the developed model are in good agreement with experimental data. The model further reveals that LA-MOCVD effectively suppresses C incorporation by reducing the active C species in the gas phase. Moreover, high step velocity in step flow growth mode can facilitate C incorporation at fast Rg, exhibiting steeper C increase. The theoretical model indicates that [C] can be suppressed below 1016 cm−3 with a fast growth rate (Rg) of 10 μm/h by utilizing higher power LA-MOCVD and freestanding GaN substrates with larger off-cut angles.

1 March 2025 in APL Electronic Devices
Verified
Journal Article
Open access
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
KZKaitian Zhang
Kaitian Zhang
DYDong Su Yu
Dong Su Yu
LMLingyu Meng
Lingyu Meng
CCChristopher Chae
Christopher Chae
Hongping ZhaoHongping Zhao
Hongping Zhao
Ultrawide bandgap (UWBG) semiconductor β-phase Ga2O3 has attracted significant interest for potential power electronics applications. This, however, is hindered by the lack of effective p-type dopants in β-Ga2O3. A p–n heterojunction utilizing the recently discovered UWBG p-type LiGa5O8 in conjunction with n-type (010) β-Ga2O3 is demonstrated in this work. Ohmic contacts to the UWBG p-type material, LiGa5O8, were achieved via a combinational Pt/Ni/Au metal stack. Obvious improvement in contact resistance was observed with annealing of the contact metal at 375 °C for 1 min in N2 ambient. Rectifying characteristics with a turn-on voltage of 5.46 V and an ideality factor of 2.78 were extracted from the p-LiGa5O8/n-Ga2O3 heterojunction. Current density change of more than 7 orders of magnitude was obtained between the off-state and on-state of the diodes measured. This work provides a potential pathway to fully utilize the high breakdown field associated with β-Ga2O3 for high power device applications with a p-type material that has an even wider bandgap (and therefore a potentially higher breakdown field) than β-Ga2O3.

1 April 2025 in APL Materials
Verified
Journal Article
Open access
KZKaitian Zhang
Kaitian Zhang
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
Hongping ZhaoHongping Zhao
Hongping Zhao
Recently, LiGa5O8, with a bandgap of ∼5.4 eV, has been demonstrated as a p-type semiconductor, which can be used to form a pn junction with β-Ga2O3. However, the occurrence of the p-type conductivity remains undetermined. In this work, the influence of as-grown film compositions and post-growth annealing on the p-type conductivity were investigated. The results indicate that oxygen vacancies play an important role in achieving p-type conductivity, as films with lower oxygen content exhibit higher hole concentrations under Li-poor conditions. The impact of different annealing atmospheres was also studied, finding that argon annealing enhances hole conductivity without altering film composition, while oxygen annealing reduces p-conductivity. In addition, the uniformity of Li distribution in the films was confirmed via secondary ion mass spectrometry (SIMS) depth profiling. The effect of unintentional Cr impurity incorporation was probed via cathodoluminescence (CL), concluding that Cr impurity led to strong luminescence at 716 nm but did not show impact on p-type behavior. Results from this work provide a deeper understanding of the fundamental properties of LiGa5O8, paving the way for its integration into advanced power electronic devices.

18 March 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
KZKaitian Zhang
Kaitian Zhang
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
CCChristopher Chae
Christopher Chae
JHJinwoo Hwang
Jinwoo Hwang
Hongping ZhaoHongping Zhao
Hongping Zhao
LiGa5O8, a recently discovered ultrawide bandgap semiconductor exhibiting p-type conductivity at room temperature, is grown on (010) β-Ga2O3 substrate. Utilizing a mist chemical vapor deposition method, LiGa5O8 thin film grown on insulating Ga2O3 substrate exhibits hole concentration ∼2.31 × 1018 cm−3 and hole mobility ∼2.07 cm2/V s. The resulting heterostructure is characterized comprehensively. A smooth, uniform film growth was observed by scanning electron microscopy and atomic force microscopy imaging. Cross-sectional scanning transmission electron microscopy and x-ray diffraction confirm the growth of spinel cubic crystal structure of LiGa5O8 along the [110] direction. Moreover, the valence and conduction band offsets at p-LiGa5O8/β-Ga2O3 heterointerface were determined via x-ray photoelectron spectroscopy. The determined band alignments at LiGa5O8/β-Ga2O3 interface reveal the formation of a type-II (staggered) heterojunction. The experimental measurements provide valuable parameters of the band offsets at the heterointerface, addressing a crucial aspect for future power electronic device design and fabrication based on β-Ga2O3 ultrawide bandgap semiconductors.

9 April 2024 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
KZKaitian Zhang
Kaitian Zhang
Hongping ZhaoHongping Zhao
Hongping Zhao
Crystalline thin films of LiGa5O8 have recently been realized through epitaxial growth via mist-chemical vapor deposition. The single crystal, spinel cubic LiGa5O8 films show promising fundamental material properties and, therefore, make LiGa5O8 a potential enabling material for power electronics. In this work, chemical resistance and etch susceptibility were investigated for the first time on crystalline LiGa5O8 thin films with various wet chemistries. It was found that LiGa5O8 is very chemically resistive to acid solutions, with no apparent etching effects observed when placed in concentrated acid solutions of HCl, H2SO4, HF, or H3PO4 at room temperature. In contrast, orthorhombic (010) LiGaO2 shows effective etching in HCl solutions at varying dilution concentrations, with etch rates measured between 8.6 [1000:1 (DI water: HCl concentration)] and 6092 nm/min (37 wt. % HCl). The inductively coupled plasma reactive ion etching (ICP-RIE) of LiGa5O8 using BCl3/Ar and CF4/Ar/O2 gas chemistries was investigated. The etching rate and surface morphology of etched surfaces were examined as a function of RIE and ICP power. Using a CF4/Ar/O2 gas chemistry with an RIE power of 75 W and an ICP power of 300 W resulted in smooth etched planar surfaces while maintaining an etch rate of ∼24.6 nm/min. Similar dry etching studies were performed for LiGaO2. It was found that the BCl3/Ar gas chemistry was better suited for LiGaO2 etching, with similar surface morphology quality being obtained after etching as prior etching when a RIE power of 15 W and an ICP power of 400 W is utilized.

16 November 2023 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Open access
PDF file
KZKaitian Zhang
Kaitian Zhang
CHChenxi Hu
Chenxi Hu
VVVijay Gopal Thirupakuzi Vangipuram
Vijay Gopal Thirupakuzi Vangipuram
LMLingyu Meng
Lingyu Meng
CCChristopher Chae
Christopher Chae
Hongping ZhaoHongping Zhao
Hongping Zhao
The effect of varying threading dislocation densities on the internal quantum efficiencies (IQEs) of InGaN quantum wells (QWs), with and without intentionally created “V-pits,” is reported here. InGaN QW samples grown on GaN-on-sapphire templates with threading dislocation densities of <1 × 108 and <1 × 109 cm−2 are compared, with and without GaN/InGaN superlattice (SL) layers incorporated to intentionally open up the threading dislocation cores and form large-size “V-pits.” The formation of “V-pits” is confirmed by cross-sectional transmission electron microscopy to initiate from threading dislocations in the SL layers. The densities of the pits are confirmed by plan-view SEM to agree with the substrate threading dislocation densities. The experimental room temperature IQEs of the “V-pit” QW samples are enhanced to 15% ± 1% compared to 6% ± 2% for conventional QW samples. Both conventional and “V-pit” samples show insensitivity to the magnitude of the dislocation densities with respect to IQE performance, while the “V-pit” samples show shifts in the peak emission wavelengths compared to the conventional samples, attributed to strain modulation. This study provides additional understanding of the causes of the observed insensitivity of the IQEs to different threading dislocation densities.