Flexible perovskite/Cu(In,Ga)Se 2 (CIGS) tandems offer a path to high-efficiency and lightweight photovoltaics. However, simultaneously achieving high efficiency and mechanical durability remains a challenge. A contributing factor is the interfacial inhomogeneity arising from molecular aggregation in planar carbazole-based hole-selective contacts (HSCs) on flexible substrates. Here, we develop a strategy of spatial steric hindrance that transforms planar carbazole core into a three-dimensional π-conjugated skeleton. This molecular reconfiguration suppresses intermolecular π-π stacking, yielding homogenized selective contacts and high-quality perovskite films. When integrated into flexible monolithic perovskite/CIGS tandem devices, this strategy enabled a champion stabilized power conversion efficiency (PCE) of 26.2% (certified 25.5%) for a 0.091–square centimeter device and 25.3% (certified 24.3%) for a centimeter-scale device, both representing high certified efficiencies reported to date for flexible two-terminal tandems. These devices demonstrated remarkable mechanical robustness, retaining their initial PCE after 10,000 bending cycles at a 10-millimeter radius, highlighting the potential of molecular-level interfacial engineering to realize high-efficiency, stable, and scalable flexible photovoltaics.
Tackling nonradiative recombination at the perovskite surface is critical yet challenging for unlocking the full potential of perovskite solar cells (PSCs). Although conventional surface passivation effectively reduces trap state density, providing crucial benefits, it will inevitably modify surface energetics that may compromise carrier dynamics and then constrain device performance. Here, we develop a strategy to control the energy-level shifting by passivators through modulation of intermolecular hydrogen bond formation (N─H…N) between the two effective passivators, enabling effective n-type shift at the perovskite surface while sustaining sufficient defect passivation. This strategy featuring tunable energy levels demonstrates versatile compatibility across various perovskite compositions, indicating universal applicability. Consequently, surface trap–mediated nonradiative charge recombination is suppressed, resulting in a champion single-junction inverted wide-bandgap (1.68 electron volts) PSC with a power conversion efficiency (PCE) of 24.04%. We thereby demonstrate a champion PCE of 33.63% in 1–square centimeter two-terminal monolithic perovskite/silicon tandem (certified 33.48%). These results validate tunable energy levels in passivators as an essential solution for interfacial recombination, improving the efficiency and stability of single-junction PSCs and their tandem devices.
Wide-bandgap (WBG) perovskite solar cells (PSCs) have garnered significant attention due to their potential to form high-quality, stable films, which can significantly enhance the efficiency of silicon-based tandem solar cells (TSCs). However, the performance of these devices is hindered by poor crystallization, a high intrinsic trap density in the WBG perovskite film, and nonradiative recombination, primarily due to bulk defects. In response to these challenges, we introduce 3-pyridinylmethylammonium iodide (3-PyAI) as an additive to passivate intrinsic defects within the bulk of the perovskite film. The addition of 3-PyAI significantly lowers defect induced nonradiative recombination by developing interactions with uncoordinated Pb2+ ions and FA+ cations. The resulting 3-PyAI-modified perovskite film significantly improves crystallinity, enlarges grain size, enhances bulk quality, and minimizes nonradiative recombination defects. Consequently, the methylammonium-free Cs0.22FA0.78Pb(I0.85Br0.15)3 PSCs demonstrate power conversion efficiency (PCE) of 21.75%, much higher than that of the control device at 19.60%. Building on this advance, we integrated a silicon bottom solar cell, developing a four-terminal (4T) TSC that achieved a champion PCE of 30.52%. This work addresses the critical performance bottlenecks in WBG-PSCs and establishes a robust framework for realizing high-efficiency TSCs, representing a significant step toward the practical implementation of next-generation photovoltaic technologies.
Wide-bandgap (WBG) perovskite solar cells (PSCs) are essential top absorbers in perovskite/silicon tandem solar cells. However, their power conversion efficiencies (PCEs) are limited by poor crystallization, abundant trap states, and defect-mediated nonradiative recombination in both the bulk and at the surface. Here, we introduce a dual-modification treatment that couples phenylurea (Ph-urea) as a bulk additive with fluorinated phenethylammonium iodide (F-PEAI) as a surface passivant to synergistically enhance crystallinity, passivate defects, and suppress nonradiative losses. Ph-urea enhances bulk crystallinity and structural coherence through Pb⋯O=C coordination, leading to uniform nucleation and enlarged grains, while F-PEAI forms a thin two-dimensional (2D) capping layer atop the ordered three-dimensional (3D) lattice, creating a surface-confined 2D/3D heterostructure. Structural and spectroscopic analyses confirm enhanced crystallinity, the emergence of low-angle 2D diffraction features, and a stabilized surface-localized PbI2 phase, indicating effective bulk-surface defect regulation. This cooperative modification lowers the trap density by nearly threefold, substantially prolongs carrier lifetimes, and markedly suppresses trap-mediated recombination. As a result, Cs0.22FA0.78Pb(I0.85Br0.15)3 WBG-PSCs deliver a champion PCE of 22.68%, compared with 19.67% for pristine devices. Semitransparent devices retain ∼20% PCE with strong near-infrared transparency, enabling efficient spectral splitting in four-terminal perovskite/silicon tandems that reach 30.90% efficiency. These findings demonstrate that synergistic crystallinity enhancement and selective 2D surface reconstruction provide a robust pathway for producing defect-suppressed, tandem-compatible WBG absorbers.