Mohammad Mehdi Mardani

Mohammad Mehdi Mardani

Auto-generated profile, based on publicly available information

Mohammad Mehdi Mardani

Aalborg Universitet Teknisk-Naturvidenskabelige Fakultet, 98740 Aalborg Ost Denmark 9220

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
Mohammad Hassan KhoobanMohammad Hassan Khooban
Mohammad Hassan Khooban
AMAli Masoudian
Ali Masoudian
TDTomislav Dragicevic
Tomislav Dragicevic
This paper proposes design of optimal and robust coordinated controller of hybrid energy storage system in a naval DC microgrid (MG) application. It is able to mitigate the negative effects of the pulsed power loads and meet the practical limitations of both converters input control and state variables signals based on IEEE standards. To do this, first, the dynamic model of the DC MG, which can represent in either all-electric aircraft or shipboard power systems is developed. Second, a novel model predictive controller (MPC) for energy storage converters is proposed such that all of the mentioned hard constraints are guaranteed. Third, a linear matrix inequality (LMI) approach is used to solve the MPC conditions. Finally, to evaluate the applicability and effectiveness of the proposed approach, some experimental tests are extracted. Obtained results verify better performance of the proposed approach over other state of the art control techniques.

9 July 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
NVNavid Vafamand
Navid Vafamand
Mohammad Hassan KhoobanMohammad Hassan Khooban
Mohammad Hassan Khooban
TDTomislav Dragicevic
Tomislav Dragicevic
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
The DC microgrid (MG) system has several advantages over the AC one. Therefore, it recently became a preferred architecture in numerous industrial applications. Many loads in DC MGs are electronically regulated and they challenge the stability of the system due to their constant power load (CPL) behavior. This paper proposes a systematic and simple approach to design an improved state feedback controller for the power buffer that can stabilize the DC MGs with multiple CPLs. Based on the so-called sector nonlinearity approach, the nonlinear DC MG with several CPLs is exactly represented in a Takagi-Sugeno (TS) fuzzy model. Then, by employing the quadratic D-stability theory, the sufficient conditions to guarantee the stability and transient performance of the closed-loop system are obtained in terms of linear matrix inequalities (LMIs), such that the decay rate and oscillatory behavior of the closed-loop DC MG system are guaranteed to lie inside a pre-defined region. The LMI conditions can be numerically solved by utilizing the YALMIP toolbox in the MATLAB. Finally, to illustrate the merits and implementation validity of the proposed approach, some hardware-in-the-loop (HiL) real-time simulation (RTS) results on a DC MG, which feeds two CPLs, are presented.

9 November 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
AAAli Jafarian Abianeh
Ali Jafarian Abianeh
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
FFFarzad Ferdowsi
Farzad Ferdowsi
RGRaju Gottumukkala
Raju Gottumukkala
TDTomislav Dragicevic
Tomislav Dragicevic
In this article, a cyber-resilient consensus-based distributed control scheme is proposed for islanded ac microgrids. Considering the impacts of false data injection (FDI) attacks on the conventional consensus algorithms, a hybrid solution is presented based on the combination of multiobjective sliding-mode control and communication link quality observer to provide a reliable performance against different types of FDIs. Unlike the commonly developed distributed observer-based cyber-resilient algorithms, this approach aims to form a complete localized solution without the requirements for transmission of extra distributed signals in the secondary layer. Using the proposed method, the system reliability will not be impacted by the cyber intrusions on the distributed observer terms, and the system's dynamic performance is not deteriorated by the counteracting operation resulted from adaptive distributed observers under other system-transient conditions such as load dynamics, which can be even worsened under communication delays. Using cyber-resilient offset compensation terms, performance of the proposed sliding-mode control scheme is enhanced for multiobjective regulation. Integrating the sliding-mode control with communication link observer also ensures effective isolation of the unbounded and extreme cyberattacks. Unlike the former indirect local observers, the proposed scheme operates directly based on monitoring the affected distributed signals rather than only power terms, which enhances its reliability on detection. The effectiveness of the proposed scheme is validated through a real-time model developed in Typhoon HIL-402 real-time simulator as well as the experimental tests.

3 May 2022 in IEEE Transactions on Power Delivery
Verified
Journal Article
Closed access
CZChen Zhang
Chen Zhang
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
TDTomislav Dragicevic
Tomislav Dragicevic
Voltage Source Converter (VSC) for grid integration of renewable energies are prone to have small-signal stability issues when connected to weak AC grids. Such stability issues largely arise from the lack of VSC control adaptivity to the varying grid condition (e.g., grid impedance). To address this issue, this letter presents an adaptive multi-parameter tuning method using the Artificial Neural Network. Innovative aspect of the proposal lies in that it enables the VSC to simultaneously tune multiple controller parameters online, which brings about a pole-tracking-based stabilization control feature for the VSC. Experimental results demonstrate that the proposed method can effectively and adaptively stabilize the VSC when the grid impedance is varied.

13 October 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
RLRadu Dan Lazar
Radu Dan Lazar
NMNenad Mijatovic
Nenad Mijatovic
TDTomislav Dragicevic
Tomislav Dragicevic
This paper proposes a real-time algorithm for identifying the grid parameters, which is concurrently used for online tuning of the predictive controller in each iteration, in a gridtied active front end (AFE) voltage source converter (VSC) applications. The algorithm is designed by inspiring from the concepts of the extended Kalman filter (EKF) and the model predictive controller (MPC). The performance of the algorithm highly depends on the weighting factors of the algorithm. The artificial neural networks (ANN)-based algorithm is used to find the optimal set of weighting factors among the ones in a parameter search block. An offline particle swarm optimization (PSO) is run to provide the data source for the parameter search block. The algorithm identifies not only the inductance but also the resistance of the grid. Additionally, the hard constraints on the amplitude of the input and output variables are guaranteed. The validation of the proposed approach is performed experimentally and compared with the state-of-the-art conventional methods. The experimental results show the proposed method could effectively stabilize the system in weak grid conditions and under wide impedance variations. Additionally, the accuracy of the proposed impedance identification method is 96%.

13 June 2018 in Transactions of the Institute of Measurement and Control
Verified
Journal Article
Closed access
MMMohammad Mehdi Mardani
Mohammad Mehdi Mardani
NVNavid Vafamand
Navid Vafamand
MKMohammad Hassan Khooban
Mohammad Hassan Khooban
TDTomislav Dragicevic
Tomislav Dragicevic
Frede BlaabjergFrede Blaabjerg
Frede Blaabjerg
This paper investigates the problem of designing a non-fragile polynomial fuzzy controller for a class of polynomial fuzzy models subjected to persistent bounded disturbances and system uncertainty. The proposed controller is considered to satisfy the input saturation constraint. Furthermore, the resilient controller is affected by linear fractional uncertainties. The overall structure of the controller is obtained by the polynomial parallel distributed compensation concept. The sufficient conditions guarantee an L1 performance of the perturbed system and exponential stability of the non-perturbed system is achieved in terms of sum-of-squares decomposition conditions. Subsequently, the sum-of-squares-based conditions lead to minimization of the L1 performance such that the above-mentioned hard constraints on the control input and robustness of the closed-loop system against the system and controller uncertainties will be guaranteed. The controller gain matrices will be achieved by numerically solving the sum-of-squares-based conditions with the third-party MATLAB toolbox ‘SOSTOOLS’. Finally, extensive studies and hardware-in-the-loop simulations on a ball-and-beam system are presented, which illustrate the proposed controller can accurately and smoothly track the set point frequency. Furthermore, the proposed control approach is more robust over prior-art controllers for all the simulation scenarios.