A novel dual-band substrate-integrated waveguide (SIW) antenna array topology is proposed for operation in the 28 and 38 GHz frequency bands. Four miniaturized quarter-mode SIW cavities are tightly coupled, causing mode bifurcation, and yielding an antenna topology with four distinct resonance frequencies. A pair of resonances is assigned to both the 28 and 38 GHz band, achieving wideband operation in both frequency ranges. Moreover, owing to the exploited miniaturization technique, an extremely compact array topology is obtained, facilitating easy and straightforward integration. The computer-aided design process yields a four-element antenna array that entirely covers the 28 GHz band (27.5–29.5 GHz) and 38 GHz band (37.0–38.6 GHz) with a measured impedance bandwidth of 3.65 and 2.19 GHz, respectively. A measured broadside gain of 10.1 dBi, a radiation efficiency of 75.75% and a 3 dB beamwidth of 25° are achieved in the 28 GHz band. Moreover, in the 38 GHz band, the measured broadside gain amounts to 10.2 dBi, a radiation efficiency of 70.65% is achieved, and the 3 dB beamwidth is 20°.
6 October 2017 in IEEE Transactions on Antennas and Propagation
A novel wideband substrate integrated waveguide (SIW) antenna topology, consisting of coupled half-mode and quarter-mode SIW resonant cavities, is proposed for operation in the 60 GHz band. This innovative topology combines a considerable bandwidth enhancement and a low form factor with compatibility with low-cost printed circuit board manufacturing processes, making it excellently suited for the next generation, high data rate wireless applications. Moreover, exploiting SIW technology, a high antenna-platform isolation is obtained, enabling dense integration with active electronics without harmful coupling. The computer-aided design process yields an antenna that covers the entire 57–64 GHz IEEE 802.11ad band with a measured fractional impedance bandwidth of 11.7% (7 GHz). The measured maximum gain and radiation efficiency of the prototype are larger than 5.1 dBi and 65%, respectively, within the entire impedance bandwidth.
A novel antenna design for wideband operation is presented, consisting of a system of two coupled miniaturized eighth-mode resonant radiating cavities with a low-complexity feeding network. The design methodology relies on the virtual magnetic boundaries along the symmetry planes of a rectangular waveguide resonator, for size reduction, and frequency bifurcation of two tightly coupled resonators, for bandwidth enhancement. After discussing its operating principle, a prototype targeting wearable applications is designed, manufactured, and validated. Multiband operation is achieved with simultaneous coverage of the 2.4 GHz ISM band and the LTE-7 up-and downlink bands. Measurements in free-space and on-body scenarios validate the antenna’s performance. A bandwidth of 414 MHz (16.2 %) is measured, as well as a maximal gain of 4.7 dBi. The directive patch-like radiation pattern and the ground plane topology lead to high body-antenna isolation and good on-body performance. Impedance bandwidth and radiation pattern remain stable when the antenna is worn by a person and bent around a cylinder to mimic deformation.
6 December 2017 in IET Microwaves, Antennas & Propagation
This study presents a circularly‐polarised substrate‐integrated waveguide (SIW) antenna implemented using a textile substrate and operating at 2.45 GHz, in the industrial, scientific, and medical frequency band. The antenna topology is based on a folded cavity with an annular ring as a radiating element, and it permits to obtain compact size and low sensitivity to the environment, without deteriorating the radiating performance. These characteristics, together with the choice of adopting a textile substrate, make the SIW antenna suitable for the integration in wearable systems for body‐centric applications. The electromagnetic performance of the proposed antenna achieved in simulations was verified through the measurement of the device in an anechoic chamber. The circularly‐polarised antenna exhibits a maximum gain of 6.5 dBi, a radiation efficiency of 73% and a very high front‐to‐back ratio.
Research over the last decade has shown the potential of smart wearables in lab settings. Following the current success of smart watches [1], activity trackers [2], [3], and fitness trackers [4], recent startups are breaking through with commercial products integrating smart functionality into traditional pieces of clothing. Some representative examples include the smart sock by Owlet [5], which tracks infants? heart rate and oxygen levels; connected footware by Digitsole [6]; anti-back-pain apparel by Percko [7]; smart bikinis, dresses, and swimsuits by Spinali Design [8]; and the Iilation jacket by Teiimo [9].
13 December 2017 in Journal of Lightwave Technology
ATTO targets wireless networking at fiber speed: 100 Gb/s/m 2 with latencies smaller than 10 μs. To provide this tremendous wireless capacity, ultrasmall floor-integrated cells are proposed. In this way, short-reach communication can be established, reducing the effect of interference and providing full frequency reuse in the wireless domain. Radio frequency (RF)-over-fiber coherent communication and a dedicated 2-D passive optical network structure support the interconnection and selection of the cells and minimize the required transceiver electronics. To evaluate the feasibility of the proposed architecture, key principles are validated at lower frequency bands. Two main building blocks are addressed in this paper: a fully passive opto-antenna to prove that a passive remote antenna head can be realized owing to the short transmission distances. Furthermore, a low-cost RF-over-fiber system is demonstrated: sigma-delta modulation drives nonlinear optical modulators, such as electroabsorption modulators and vertical-cavity surface-emitting lasers, using a digital transmitter while remaining compatible with the passive opto-antenna. Finally, two important properties of the ATTO floor are evaluated. The exposure of a human body model to RF fields by the antenna floor is evaluated. Measurements ensure a 200-fold margin with respect to the International Commission on Non-Ionizing Radiation Protection basic restriction. To guarantee that multiple devices can communicate with the ATTO floor simultaneously, the interference between cells spaced 300 mm apart was evaluated.