1 March 2024 in Physics of Plasmas
In plasma fusion devices, the selection of shielding materials is one of the challenges for plasma diagnostic and control systems under high radiation levels during long operation times. This study presents the effect of shielding materials on neutron flux for a radiated power and soft x-ray core intensity measurement system for a DEMOnstration power plant. A calculation model of neutron shielding was used to investigate the neutron shielding performance of borides and carbides for a large distance from plasma to the diagnostic system. The neutron fluxes were characterized for three points close to the measurement system location. The related neutronic calculations were performed with an ADVANTG hybrid code to obtain neutron flux distribution and attenuation rate depending on the thickness of shielding materials. The results indicate that B4C, W2B5, and WB4 are the most effective options to serve as shielding material due to the effect of boron on neutron shielding effectiveness.
30 May 2025 in Nuclear Fusion
JMJavier Martínez-Serrano
+26
IFMIF-DONES (International Fusion Materials Irradiation Facility – Demo Oriented NEutron Source) is an accelerator-based neutron irradiation facility for the study and qualification of materials used for the design, licensing, and reliable operation of fusion reactors such as DEMO. Neutron serves as a critical tool for irradiating and testing material samples, while also posing significant radiation safety considerations. This work provides a comprehensive overview of neutronics studies and nuclear analyses, beginning with the accelerator where neutron and gamma are generated from deuteron losses and deposition, progressing to the test systems where most d-Li neutrons are produced, and then to the systems and areas where the radiation is covered. Key aspects analyzed include neutron-induced material damage and gas production, nuclear heating, radiation doses during both beam-on and beam-off conditions, activation of structural components and liquids (such as lithium and water), and the assessment and optimization of radiation shielding across the accelerator systems, target systems, lithium systems, and building and plant systems. Additionally, this article highlights recent advancements in neutronics simulation tools, evaluations of nuclear data, and experimental efforts, all of which provide essential foundations for nuclear analyses in DONES.
17 March 2006 in Physica Scripta
A system of moderators of DD-fusion neutrons emitted by the plasma focus device PF-1000 at IPPLM, Warsaw was employed for the use of thermoluminescent dosimeters (TLDs) as passive detectors of thermal neutrons. The diagnostics was derived from Monte Carlo calculations of responses of dosimeters located in spherical polyethylene moderators with different diameters. As time-integrating dosimeters coupled 6LiF:Mg,Cu,P (TLD-600H) and 7LiF:Mg,Cu,P (TLD-700H) detectors were applied. A difference in read-out signals between TLD-600H and TLD-700H dosimeters, which is directly proportional to the number of thermal neutron interactions, is compared with the response of silver activation detectors. The detectors used started to operate from a neutron yield of ~5×109 and present a convenient method for investigation of spatial-distribution of neutron emission.
16 April 2026 in IEEE Transactions on Plasma Science
Accurate Monte Carlo (MC) simulations are essential for predicting system performance, optimizing design, and ensuring reliable operation. One of the aspects of achieving high-fidelity simulations is the level of detail present in the CAD geometry, especially for diagnostics. This study investigates how varying levels of geometric details, ranging from simplified to more detailed models, affect the neutron and photon flux distributions on the JT-60SA tokamak model. In particular, it focuses on the effect of backscattering from surrounding components on diagnostic and actuator systems such as the Thomson scattering system (TSS) and pellet launching system (PLS). After a brief explanation of the simplification procedure, this work highlights an increase of up to 20% in terms of neutron flux in some diagnostic locations due to the implementation of the ex-cryostat components (e.g., common stage) while decreasing at larger distances from the tokamak.
2 September 2026 in Fusion Engineering and Design
27 February 2026 in Plasma Physics and Controlled Fusion
As the primary coolant, water is used in most current fission reactors and is also a promising coolant for future fusion devices. During normal operation, the fusion device produces plasma discharges. The primary cooling water circulates through in-vessel cooling channels and thus passes through regions of high neutron flux ( ) produced by D–T fusion. During this process, cooling water can be activated and produce radioactive nuclides that emit gamma rays and neutrons (neutron energy range 0.4–1.7 MeV). Predicting the dose-rate field—the spatial and temporal distribution of radiation dose rates ( ) produced by activated nuclides in the flowing coolant—requires coupling computational fluid dynamics (CFD) with radiation-transport and activation calculations. To validate these coupled CFD + radiation-transport + activation models and to investigate how production, transport and decay of activation products together create the observed dose-rate field, the KATANA water-activation loop at the Jožef Stefan Institute Training, Research, Isotope production, General Atomics Mark II reactor was commissioned. This paper examines the newly established KATANA water-activation loop and evaluates the feasibility of using the neutron activation method for neutron measurements at the facility. The studies show that this method can be successfully applied to detect and quantify neutrons originating from decay. Furthermore, the measurements demonstrate that this technique is capable of characterising the neutron emission rate at the KATANA water-activation loop. Finally, the paper proposes a method for estimating the neutron fluence at selected sample positions. The results encourage further use of the neutron activation method to investigate neutrons emitted by activated water. Future experiments could determine the neutron fluence-rate profile, thereby validating fluid-activation codes for ITER, DEMO and other fusion devices. This would also contribute to reducing the uncertainty of the reaction cross-section.