In hot desert regions, attention is turning to local sources of aggregate that were previously regarded as ‘too difficult' to exploit. This paper describes an investigation of such a deposit in Qatar. The material, known as Wadi gravel, is a gravelly sand of Tertiary age cemented by gypsum. A field survey found the gravel content to be in the range of 10 to 20%. As-dug samples had excessively high sulfate content, which could not be removed with conventional aggregate operations. However, intensive treatment in a local sand-processing plant using multi-stage crushing, screening and washing reduced the sulfate to acceptable levels. Petrographic analysis was carried out to identify rock types potentially susceptible to Alkali Silica Reaction (ASR). Trial concrete mixes using the processed Wadi gravel were found to produce satisfactory C40 and C60 concrete. Full-scale building trials were constructed to demonstrate the practicality of using the gravel and assess in-service performance. The smooth surface and rounded particles of Wadi gravel improved the concrete workability and strength, and durability-related properties were similar to concrete made with imported gabbro. Strata similar to Wadi gravel occur widely in hot desert regions and could be useful sources of coarse and fine aggregate for concrete.
13 December 2019 in Quarterly Journal of Engineering Geology and Hydrogeology
Deposits of Wadi gravel are available in many parts of the Gulf region, but not widely utilized as aggregate for concrete, mainly due to the possibility of internal sulfate attack, plus the perceived risk of alkali aggregate reactivity (AAR). This paper describes the investigations for AAR of the Wadi gravel in this case, as part of the wider study described in Part 1 of this paper. Wadi gravel from the Mekaines site in Qatar was subjected to petrographic analysis, plus the gel-pat and accelerated mortar-bar test methods. The AAR potential was found to be low to normal. The accelerated mortar-bar test exhibited ‘innocuous’ behaviour after 14 days of immersion in alkali solution. When separately testing the constituent rock types of the Wadi gravel, limestone and quartz returned innocuous results, while rhyolite, granite and quartzite returned potentially alkali silica reactive (ASR) results and some reaction was confirmed using post-expansion petrographic examination. Wadi gravel was classified as potentially reactive in the RILEM AAR-4.1 accelerated concrete prism test, but of ‘low reactivity’ in the BS 812-123 test over the longer period of 12 months. Overcoming the potential problems of gypsum content and AAR successfully provides a valuable local resource of Wadi gravel aggregate for concrete.
Volumes of accumulated solid waste materials of sewage sludge (SS) and municipal solid waste (MSW) in Qatar continue to increase annually with a potentially negative impact on the environment. This paper presents an innovative technology for the production of green cement and advanced construction products from SS and MSW. Chemical composition analyses of the solid waste materials indicated the presence of main oxides available in Portland cement, but at lower contents. The three solid waste materials were incinerated and ground to produce consistent powder materials of similar sizes to Portland cement. The physical and chemical characteristics of the solid waste materials were investigated and compared to that of Portland cement. Paste and mortar mixtures were prepared by replacing 25, 50, and 75% of Portland cement with the different solid waste materials. Solid waste materials were found to influence the fresh properties of concrete, mainly water demand and setting time. Increasing the content of solid waste materials resulted in reduced compressive strength at all tested ages. SS gave the best performance within the solid waste materials investigated. Recommendations are made on the effective use of solid waste materials in various construction applications.
Wadi gravel is a local aggregate in Qatar that could contribute to enhanced sustainability by replacing expensive imported gabbro. The material needs to be processed before use to reduce sulfate content to acceptable levels. The paper presents the performance assessment of three full-scale buildings, variously made with 50% and 100% Wadi gravel and conventional gabbro concretes. Site monitoring up to four years in service demonstrated the strength development with age and resistance to the aggressive exposure conditions in Qatar. The Wadi gravel concrete exhibited at least similar performance to the gabbro concrete, and excellent durability as defined in national construction specifications. The paper provides initial long-term assessment and builds on previous publications by the authors, for initial assessment of Wadi gravel concrete. In an earlier investigation by the authors, a difference was observed between the concrete prism expansion test results of RILEM AAR-4.1 and BS 812-123. Wadi gravel was classified as potentially reactive in the more accelerated RILEM AAR-4.1 and of low reactivity in the more realistic exposure BS 812-123. Petrographic examination of the hardened concrete after four years in service has shown no evidence of cracking or signs of distress or deterioration and confirmed the BS 812-123 interpretation of alkali-silica reactivity of Wadi gravel concrete. The results obtained in this investigation provide more confidence for the wider and efficient use of Wadi gravel in structural concrete.