26 October 2021 in Materials and Structures
This outline guide, RILEM AAR-0, describes how to use the following test methods in the assessment of the alkali reactivity potential of aggregates and concrete. The test methods included are:AAR-1.1 Petrographic examination method (2016)AAR-1.2 Recommended guidance (Atlas) (2016)AAR-2 Accelerated mortar-bar method (2016)AAR-3.1 & AAR-3.2 Concrete prism test—38 °C (2016)AAR-4.1 Concrete prism test—60 °C (2016)AAR-5 Screening test for carbonate aggregates (2016)AAR-8 Determination of alkalis releasable by aggregates in concrete (2021)AAR-10.1 & 10.2 Concrete prism test—38 °C (2021)AAR-11.1, 11.2 & 11.3 Concrete prisms test—60 °C test method (2021)AAR-12.1, 12.2 & 12.3 Concrete prisms—60 °C test method with alkali supply (2021)AAR-13 Application of alkali-wrapping for concrete prism testing (2021)This recommendation has been prepared by a working group within RILEM TC 258-AAA. The recommendation has been reviewed and approved by all members of the TC.
13 December 2019 in Quarterly Journal of Engineering Geology and Hydrogeology
Deposits of Wadi gravel are available in many parts of the Gulf region, but not widely utilized as aggregate for concrete, mainly due to the possibility of internal sulfate attack, plus the perceived risk of alkali aggregate reactivity (AAR). This paper describes the investigations for AAR of the Wadi gravel in this case, as part of the wider study described in Part 1 of this paper. Wadi gravel from the Mekaines site in Qatar was subjected to petrographic analysis, plus the gel-pat and accelerated mortar-bar test methods. The AAR potential was found to be low to normal. The accelerated mortar-bar test exhibited ‘innocuous’ behaviour after 14 days of immersion in alkali solution. When separately testing the constituent rock types of the Wadi gravel, limestone and quartz returned innocuous results, while rhyolite, granite and quartzite returned potentially alkali silica reactive (ASR) results and some reaction was confirmed using post-expansion petrographic examination. Wadi gravel was classified as potentially reactive in the RILEM AAR-4.1 accelerated concrete prism test, but of ‘low reactivity’ in the BS 812-123 test over the longer period of 12 months. Overcoming the potential problems of gypsum content and AAR successfully provides a valuable local resource of Wadi gravel aggregate for concrete.
26 September 2021 in Recent Progress in Materials
Wadi gravel is a local aggregate in Qatar that could contribute to enhanced sustainability by replacing expensive imported gabbro. The material needs to be processed before use to reduce sulfate content to acceptable levels. The paper presents the performance assessment of three full-scale buildings, variously made with 50% and 100% Wadi gravel and conventional gabbro concretes. Site monitoring up to four years in service demonstrated the strength development with age and resistance to the aggressive exposure conditions in Qatar. The Wadi gravel concrete exhibited at least similar performance to the gabbro concrete, and excellent durability as defined in national construction specifications. The paper provides initial long-term assessment and builds on previous publications by the authors, for initial assessment of Wadi gravel concrete. In an earlier investigation by the authors, a difference was observed between the concrete prism expansion test results of RILEM AAR-4.1 and BS 812-123. Wadi gravel was classified as potentially reactive in the more accelerated RILEM AAR-4.1 and of low reactivity in the more realistic exposure BS 812-123. Petrographic examination of the hardened concrete after four years in service has shown no evidence of cracking or signs of distress or deterioration and confirmed the BS 812-123 interpretation of alkali-silica reactivity of Wadi gravel concrete. The results obtained in this investigation provide more confidence for the wider and efficient use of Wadi gravel in structural concrete.
19 April 2022 in Materials and Structures