9 October 2024 in International Journal of Pavement Research and Technology
1 June 2021 in Case Studies in Construction Materials
MAMohammed B.S. Al-Kuwari
6 April 2024 in Innovative Infrastructure Solutions
1 January 2023 in Research on Engineering Structures and Materials
Modern society faces the duality of rapidly expanding structure, making concrete one of the world's most traded materials. However, cement manufacturing can pollute the environment by releasing approximately one tonne of CO2 for every tonne of cement produced. Concrete cracks can provide superior access for aggressive substances such as chlorides and sulfates, resulting in structural deterioration. So, to fix concrete cracks, different traditional methods were used, which use cement and some chemical agents that are hazardous to the environment. Because of the environmental issues and sustainability challenges associated with cement and concrete, it is preferable to reduce the amount of cement used by developing promising and unique solutions to enable quick crack healing in concrete and extend the structure's lifetime. Therefore, incorporating self-healing mechanisms into construction materials has been proposed to improve their performance and durability while reducing the need for maintenance and repair. This review assesses the performance and causes of autogenous and autonomous self-healing techniques. The autogenous technique occurs naturally due to inherent material properties, while the autonomous technique uses various healing agents, such as chemical or biological substances. Both techniques rely on forming calcium carbonate (CaCO3) crystals as the principal agent for concrete healing. Previous findings showed that the autogenous technique has limited efficacy in repairing larger cracks with a width exceeding 0.3mm. In contrast, autonomous techniques have shown successful repai of cracks exceeding 2mm in width. The application of an autonomous methodology in the field of concrete has resulted in significant results, such as effectively repairing large cracks, enhancing structural integrity, and substantially decreasing permeability levels from high to exceedingly low levels
13 December 2019 in Quarterly Journal of Engineering Geology and Hydrogeology
Deposits of Wadi gravel are available in many parts of the Gulf region, but not widely utilized as aggregate for concrete, mainly due to the possibility of internal sulfate attack, plus the perceived risk of alkali aggregate reactivity (AAR). This paper describes the investigations for AAR of the Wadi gravel in this case, as part of the wider study described in Part 1 of this paper. Wadi gravel from the Mekaines site in Qatar was subjected to petrographic analysis, plus the gel-pat and accelerated mortar-bar test methods. The AAR potential was found to be low to normal. The accelerated mortar-bar test exhibited ‘innocuous’ behaviour after 14 days of immersion in alkali solution. When separately testing the constituent rock types of the Wadi gravel, limestone and quartz returned innocuous results, while rhyolite, granite and quartzite returned potentially alkali silica reactive (ASR) results and some reaction was confirmed using post-expansion petrographic examination. Wadi gravel was classified as potentially reactive in the RILEM AAR-4.1 accelerated concrete prism test, but of ‘low reactivity’ in the BS 812-123 test over the longer period of 12 months. Overcoming the potential problems of gypsum content and AAR successfully provides a valuable local resource of Wadi gravel aggregate for concrete.