Paper is a biodegradable material, but in food packaging, its hygroscopicity and porosity can cause food contamination due to the exchange of gasses and liquids with the environment. Therefore, it is important to use biodegradable materials for paper coatings, such as nanocellulose, which is chemically compatible with paper but less hygroscopic. The objective of this study was to evaluate the effectiveness of nanofibrillated cellulose (NFC) as a paper coating. NFC produced from bleached eucalyptus pulp was used as a coating on kraft paper sheets produced from Pinus pulp. To prepare the coating, two thicknesses of wet nanocellulose (1 mm and 2 mm) were tested, and two nanocellulose films made with the same thicknesses were evaluated. The morphological, physical, mechanical, and thermal properties of the composites were investigated. The presence of NFC improved the surface of the paper by filling the pores; consequently, the density and barrier properties were also improved. All mechanical properties were improved, with the highest increases observed for bursting and tensile strength; however, the films showed low bursting index values and null values for the tearing index. The thermal stability of the paper with NFC coatings met the minimum requirements for food packaging.
Although paper packages are biodegradable, their applications in food packaging are limited due to high affinity for absorbing moisture and the high permeability of gases and liquids with surroundings. Therefore, exploring the use biodegradable coatings such as nanocellulose to improve barrier is a relevant strategy. This study assessed the efficacy of unbleached nanofibrillated cellulose (NFC) as an additive to paper and coatings. Using NFC derived from unbleached eucalyptus pulp, a 5% mass addition to the paper pulp and a 2 mm wet nanocellulose coating to kraft paper handsheets made from pine pulp were investigated. In addition, nanocellulose films of similar thicknesses were appraised. The physical, morphological, mechanical, and thermal characteristics of the resulting papers were assessed. Incorporating NFC notably enhanced the morphology area of the paper by padding its pores, thus increasing its density by up to 48% and improving its water barrier properties by up to 50%. The mechanical strength showed significant enhancements, particularly in bursting and tensile strength with increases of up to 134% and 50%, respectively. Anyhow, the films exhibited lower bursting indices and no improvement in the tearing index. Nonetheless, the thermal stability of the handsheets with NFC coating meets the minimum requirements for food packaging.