A ground-based field campaign was conducted in southern West Africa from mid-June to the end of July 2016 within the framework of the Dynamics–Aerosol–Chemistry–Cloud Interactions in West Africa (DACCIWA) project. It aimed to provide a high-quality comprehensive data set for process studies, in particular of interactions between low-level clouds (LLCs) and boundary-layer conditions. In this region missing observations are still a major issue. During the campaign, extensive remote sensing and in situ measurements were conducted at three supersites: Kumasi (Ghana), Savè (Benin) and Ile-Ife (Nigeria). Daily radiosoundings were performed at 06:00 UTC, and 15 intensive observation periods (IOPs) were performed during which additional radiosondes were launched, and remotely piloted aerial systems were operated. Extended stratiform LLCs form frequently in southern West Africa during the nighttime and persist long into the following day. They affect the radiation budget and hence the evolution of the atmospheric boundary layer and regional climate. The relevant parameters and processes governing the formation and dissolution of the LLCs are still not fully understood. This paper gives an overview of the diurnal cycles of the energy-balance components, near-surface temperature, humidity, wind speed and direction as well as of the conditions (LLCs, low-level jet) in the boundary layer at the supersites and relates them to synoptic-scale conditions (monsoon layer, harmattan layer, African easterly jet, tropospheric stratification) in the DACCIWA operational area. The characteristics of LLCs vary considerably from day to day, including a few almost cloud-free nights. During cloudy nights we found large differences in the LLCs' formation and dissolution times as well as in the cloud-base height. The differences exist at individual sites and also between the sites. The synoptic conditions are characterized by a monsoon layer with south-westerly winds, on average about 1.9 km deep, and easterly winds above; the depth and strength of the monsoon flow show great day-to-day variability. Within the monsoon layer, a nocturnal low-level jet forms in approximately the same layer as the LLC. Its strength and duration is highly variable from night to night. This unique data set will allow us to test some new hypotheses about the processes involved in the development of LLCs and their interaction with the boundary layer and can also be used for model evaluation.

Three months of Doppler lidar wind measurements were obtained during the Arctic Cloud Summer Experiment on the icebreaker Oden during the summer of 2014. Such ship-borne Doppler measurements require active stabilisation to remove the effects of ship motion. We demonstrate that the combination of a commercial Doppler lidar with a custom-made motion-stabilisation platform enables the retrieval of wind profiles in the Arctic atmospheric boundary layer during both cruising and ice-breaking with statistical uncertainties comparable to land-based measurements. This held true particularly within the atmospheric boundary layer even though the overall aerosol load was very low. Motion stabilisation was successful for high wind speeds in open water and the resulting wave conditions. It allows for the retrieval of vertical winds with a random error below 0.2 m s⁻¹. The comparison of lidar-measured wind and radio soundings gives a mean bias of 0.3 m s⁻¹ (2°) and a mean standard deviation of 1.1 m s⁻¹ (12°) for wind speed (wind direction). The agreement for wind direction degrades with height. The combination of a motion-stabilised platform with a low-maintenance autonomous Doppler lidar has the potential to enable continuous long-term high-resolution ship-based wind profile measurements over the oceans.

Low-level clouds (LLCs) cover a wide area of southern West Africa (SWA) during the summer monsoon months and have an important cooling effect on the regional climate. Previous studies of these clouds have focused on modelling and remote sensing via satellite. We present the first comprehensive set of in situ measurements of cloud microphysics from the region, taken during June–July 2016, as part of the DACCIWA (Dynamics–aerosol–chemistry–cloud interactions in West Africa) campaign. This novel dataset allows us to assess spatial, diurnal, and day-to-day variation in the properties of these clouds over the region. LLCs developed overnight and mean cloud cover peaked a few hundred kilometres inland around 10:00 local solar time (LST), before clouds began to dissipate and convection intensified in the afternoon. Regional variation in LLC cover was largely orographic, and no lasting impacts in cloud cover related to pollution plumes were observed downwind of major population centres. The boundary layer cloud drop number concentration (CDNC) was locally variable inland, ranging from 200 to 840 cm⁻³ (10th and 90th percentiles at standard temperature and pressure), but showed no systematic regional variations. Enhancements were seen in pollution plumes from the coastal cities but were not statistically significant across the region. A significant fraction of accumulation mode aerosols, and therefore cloud condensation nuclei, were from ubiquitous biomass burning smoke transported from the Southern Hemisphere. To assess the relative importance of local and transported aerosol on the cloud field, we isolated the local contribution to the aerosol population by comparing inland and offshore size and composition measurements. A parcel model sensitivity analysis showed that doubling or halving local emissions only changed the calculated cloud drop number concentration by 13 %–22 %, as the high background meant local emissions were a small fraction of total aerosol. As the population of SWA grows, local emissions are expected to rise. Biomass burning smoke transported from the Southern Hemisphere is likely to dampen any effect of these increased local emissions on cloud–aerosol interactions. An integrative analysis between local pollution and Central African biomass burning emissions must be considered when predicting anthropogenic impacts on the regional cloud field during the West African summer monsoon.

Sparv Embedded, Sweden (http://windsond.com, last access: 22 February 2019), has answered the call for less expensive but accurate reusable radiosondes by producing a reusable sonde primarily intended for boundary-layer observations collection: the Windsond S1H2. To evaluate the performance of the S1H2, in-flight comparisons between the Vaisala RS41-SG and Windsond S1H2 were performed during the Dynamics–Aerosol–Chemistry–Cloud Interactions in West Africa (DACCIWA) project (FP7/2007–2013) ground campaign at the Kumasi Agromet supersite (6^∘40^′45.76^′′ N, 1^∘33^′36.50^′′ W) inside the Kwame Nkrumah University of Science and Technology (KNUST), Ghana, campus. The results suggest a good correlation between the RS41-SG and S1H2 data, the main difference lying in the GPS signal processing and the humidity response time at cloud top. Reproducibility tests show that there is no major performance degradation arising from S1H2 sonde reuse.

The urgency to mitigate the effects of climate change necessitates an unprecedented global deployment of offshore renewable-energy technologies mainly including offshore wind, tidal stream, wave energy, and floating solar photovoltaic. To achieve the global energy demand for terawatt-hours, the infrastructure for such technologies will require a large spatial footprint. Accommodating this footprint will require rapid landscape evolution, ideally within two decades. For instance, the United Kingdom has committed to deploying 50 GW of offshore wind by 2030 with 90–110 GW by 2050, which is equivalent to four times and ten times more than the 2022 capacity, respectively. If all were 15 MW turbines spaced 1.5 km apart, 50 GW would require 7500 km²and 110 GW would require 16 500 km². This review paper aims to anticipate environmental impacts stemming from the large-scale deployment of offshore renewable energy. These impacts have been categorised into three broad types based on the region (i.e. atmospheric, hydrodynamic, ecological). We synthesise our results into a table classifying whether the impacts are positive, negative, negligible, or unknown; whether the impact is instantaneous or lagged over time; and whether the impacts occur when the offshore infrastructure is being constructed, operating or during decommissioning. Our table benefits those studying the marine ecosystem before any project is installed to help assess the baseline characteristics to be considered in order to identify and then quantify possible future impacts.

Volcanoes are a key natural source of CO₂, but global estimates of volcanic CO₂ flux are predominantly based on measurements from a fraction of world's actively degassing volcanoes. We combine high‐precision airborne measurements from 2016 and 2017 with atmospheric dispersion modeling to quantify CO₂ emissions from Katla, a major subglacial volcanic caldera in Iceland that last erupted 100 years ago but has been undergoing significant unrest in recent decades. Katla's sustained CO₂ flux, 12–24 kt/d, is up to an order of magnitude greater than previous estimates of total CO₂ release from Iceland's natural sources. Katla is one of the largest volcanic sources of CO₂ on the planet, contributing up to 4% of global emissions from nonerupting volcanoes. Further measurements on subglacial volcanoes worldwide are urgently required to establish if Katla is exceptional, or if there is a significant previously unrecognized contribution to global CO₂ emissions from natural sources.