The excavation-unloading damage effects of western high-geostress slopes on rock were explored by testing the pre-peak confining pressure unloading sandstone reloading mechanical properties. The deformation and failure mechanisms were studied from a mesoscopic perspective using the particle discrete-element method. (1) Approaching the unloading failure, confining pressure increased the specimen bearing capacity attenuation. (2) The confining pressure unloading promoted microdefect propagation and development; the specimens increased rapidly to the damage stress value after reaching the initiation stress value. The penetration fracture zone was more evident and expansive in the model, and the distribution of the dense crack areas was more concentrated in the fracture zone and area. (3) The average interval of the tangential contact force was the largest in the direction of crack expansion and propagation. The strong force chains were shown to primarily bear external loads, whereas the weak force chains played a key auxiliary role in maintaining stability. (4) The number of cracks developing in the confining pressure unloading damage process indicated that the loading process did not cause damage to the specimens. The fracture zones further propagated and formed on the dominant fractures based on the damage caused by the confining pressure unloading disturbance.
The creep associated with unloading surrounding rock during the excavation of deep tunnels seriously affects the stability of the tunnel, and a high seepage pressure will aggravate the strength attenuation and structural deterioration of the surrounding rock. Based on the background of the excavation-induced unloading of the surrounding rock of a deeply buried granite tunnel with high seepage pressure, in this paper we carry out a triaxial unloading seepage creep test that considers the effects of both excavation disturbance and seepage pressure. We also analyze the mechanism of unloading and seepage pressure leading to sample failure and construct a fractional creep damage constitutive model that considers the unloading effect. The results include the following findings, firstly, seepage pressure will affect the creep deformation of rock for a long time, and the circumferential expansion of the granite creep process is more obvious than the axial expansion. Secondly, a high seepage pressure will reduce the rock bearing capacity. Under 0, 2 and 4 MPa seepage pressures, the long-term strength of the samples are 193.7 MPa, 177.5 MPa and 162.1 MPa, respectively. Thirdly, the rock damage factor increases with increasing seepage pressure, time and deviatoric stress. Finally, the rationality of a fractional-order model that considers the effect of unloading and seepage is verified by the test data. These research results may provide some reference for the stability analysis of surrounding rock during excavation in environments under high-stress and high-seepage-pressure.