Large-scale fast-varying sinusoidal disturbances (FVSDs) strongly impact the operation of Grid-connected Converters (GcCs). A conventional extended state observer (ESO) is not sufficiently capable to deal with these rapid disturbances. This critical weakness has limited ESO's applications to GcCs. Therefore, a generalized integrator-ESO (GI-ESO) is developed from ESO to address such issues. Knowing that grid common disturbances can be expressed as a phase, frequency, or magnitude disturbed sinusoidal signal, multi-GIs of selective resonant frequencies are, hence, applied into the disturbance estimation loop, which enables FVSD to be observed with relatively low bandwidth. Besides, a frequency-adaptive mechanism is introduced in order to mitigate the effects of frequency deviations. The proposed GI-ESO resolves the tradeoff between the observer's bandwidth and noise filtering. A case of the three-phase phase-locked loop control system of disturbed regimes is, in particular, studied to assess the performance of GI-ESO and the stability of the resulting controlled system. Theoretical analysis and experimental results have proven its effectiveness in applications to GcCs in the presence of various disturbances.
The rural electrification of Sub-Saharan Africa and South-East Asia is crucial to end the energy poverty in which around 1 billion people are trapped. Swarm electrification, i.e., the progressive building of decentralized and decarbonized electric infrastructure in a bottom-up manner, tackles rural electrification challenges by quickly providing modern and reliable electricity services to unelectrified communities while fostering local socio-economic development. This paper follows the technological approach of this electrification model and presents the development of a DC microgrid with decentralized production and storage suitable for rural electrification. This DC microgrid aims at interconnecting nanogrids, small collective autonomous power units composed of a solar panel and a lead–acid battery for 4 to 6 households, to increase the electrical services brought to the community and enhance the economic sustainability of this rural electrification model. The design of the proposed microgrid as well as its control algorithm are thoroughly addressed and tested from software simulations and experimental testing to field deployment in Madagascar. Extensive software, experimental and field-tests results are illustrated, and the microgrid design feedback is given. This paper overall validates the proper operation of the proposed microgrid, confirming the technical feasibility of the swarm electrification approach.
Variable Speed Hydro-Electric Plant (VS-HEP) equipped with power electronics has been increasingly introduced into the hydraulic context. This paper is targeting a VS-HEP Power Hardware-In-the-Loop (PHIL) real-time simulation system, which is dedicated to different hydraulic operation schemes tests and control laws validation. Then, a proper hydraulic model will be the key factor for building an efficient PHIL real-time simulation system. This work introduces a practical and generalised modelling hydraulic modelling approach, which is based on ‘Hill Charts’ measurements provided by industrial manufacturers. The hydraulic static model is analytically obtained by using mathematical optimization routines. In addition, the nonlinear dynamic model of the guide vane actuator is introduced in order to evaluate the effects of the induced dynamics on the electric control performances. Moreover, the reduced-scale models adapted to different laboratory conditions can be established by applying scaling laws. The suggested modelling approach enables the features of decent accuracy, light computational complexity, high flexibility and wide applications for their implementations on PHIL real-time simulations. Finally, a grid-connected energy conversion chain of bulb hydraulic turbine associated with a permanent magnet synchronous generator is chosen as an example for PHIL design and performance assessment.
28 November 2019 in IEEE Transactions on Industrial Electronics
In the context of the ever-expanding application of soft magnetic materials, the fully controlled magnetic measurement has, therefore, become essential. It ensures not only the accurate modeling of materials but also the rigorous quality control throughout the manufacturing process, as well as the explicit communication of magnetic data in academic studies or between suppliers and customers. Due to the non-linearity and hysteresis nature of electrical steels, automatic flux density controller is required for high standard measurements. We propose in this paper a novel steady-state digital control algorithm with two loops, one to regulate amplitude and the other to correct waveform of the flux density. Measurement results for various samples tested by Epstein frame and ring specimens under different waveforms, a wide range of frequency and high amplitudes of the flux density have proven the high adaptability, accuracy and convergence speed of this controller. Its principle is discussed in details, together with the employed measurement bench.