Department of Materials Physics and Chemistry, School of Materials Science and Engineering , University of Science and Technology Beijing , Beijing , People's Republic of China
Auto-generated profile, based on publicly available information
Feifei Wang
Department of Materials Physics and Chemistry, School of Materials Science and Engineering , University of Science and Technology Beijing , Beijing , People's Republic of China
Hybrid polymers, which form a combination of monomers with different reactive groups and curing mechanisms, synergistically combine the properties of the two constituent homopolymers. It will be of interest to use these monomers together, with the aim of forming polymer-dispersed liquid crystal (PDLC) systems based on a hybrid polymer network. In this paper, PDLC systems using epoxies / acrylates as hybrid polymer matrix components were prepared. The effects of the ratio of epoxy monomers and acrylate monomers on morphology and the electro-optical properties of PDLC systems were investigated. It was found that the liquid crystal domain size of the polymer network could be regulated by adjusting the ratio of epoxy monomers and acrylate monomers, and that the electro-optical properties of PDLC systems could then be optimised.
Epoxy polymer dispersed liquid crystal (PDLC) films based on ethyleneglycol diglycidyl ether (EGDE)/nematic liquid crystal (SLC1717) composites were prepared by ultraviolet-initiated cationic polymerisation using triphenylsulfonium hexafluoroantimonate (Ar3S+SbF6−) as the photoinitiator. The effect of the composition of the mixture and curing temperature on the microstructure of the polymer network and the electro-optical properties was investigated. It was found that the liquid crystal (LC) domain size of the polymer network could be regulated by adjusting the LC content and the curing temperature. The electro-optical properties of PDLC films could then be optimised.
A cholesteric liquid crystal (Ch-LC) composite containing a hydrogen bond (H-bond) chiral dopant (HCD) was prepared and filled into a planar treated cell. When the cell was heated, the selective reflection of the cell exhibited an unusual red shift. One of the reasonable mechanisms was that the H-bonds of HCD ruptured when the temperature was high, and the HCD split into two new chiral dopants (CDs), which made the whole helical twisting power (HTP) value in the composite changed a lot, thus the pitch length of the composite changed. On the basis of this mechanism, when the composite was polymerised at the temperature of H-bonds of HCD ruptured, the bandwidth of the obtained film can be tuned form wider to narrower reversibly by the rupture and self-assembly of H-bonds chiral molecules as the temperature changed, respectively.
In this study, on the concept of intramolecular chiral conflict between the (R)-1,1′-binaphthyl and cholesteryl ester moieties, we have designed and synthesised a new liquid crystal (LC) (R)-dicholesteryl 6,6′-[1,1′-binaphthyl-2,2′-diylbis(oxy)]dihexanoate [(R)-DC]. A helix inversion could be observed for the chiral nematic liquid crystal (N*-LC) comprising the commercial nematic LC (N-LC) host SLC1717 and (R)-DC on heating. As a comparison, (S)-dicholesteryl 6,6′-[1,1′-binaphthyl-2,2′-diylbis(oxy)]dihexanoate [(S)-DC] was also prepared. Due to the intramolecular chiral superposition between the (S)-1,1′-binaphthyl and cholesteryl ester moieties, the N*-LC comprising SLC1717 and (S)-DC also exhibited excellent temperature sensitivity.
When a certain range of frequencies of AC electric fields are applied to a chiral nematic (N*) liquid crystal (LC) with negative dielectric anisotropy ((N*-LCN), usually prepared from a nematic LC with negative dielectric anisotropy (N-LCN) doped with a chiral dopant (CD), the long axes of the LC molecules will be oriented perpendicular to the electric field, which will be helpful to improve the orientation degree compared with the orientation induced by rubbing on the inner surfaces of the substrates sandwiching the LC. After a photopolymerisable N*-LC monomer/N-LCN/CD/an ultraviolet (UV) absorber/a photoinitiator mixture with an appropriate composition is irradiated with UV light, while an electric field with an appropriate frequency and intensity is being applied to it during the UV curing, not only the planar orientation of a high degree but also a pitch gradient of the helical structure of the LC molecules are formed in the resulted polymer network/N*-LCN composite.