This paper describes the design and human machine interface of an Active Leg EXoskeleton (ALEX) for gait rehabilitation of patients with walking disabilities. The paper proposes force-field controller which can apply suitable forces on the leg to help it move on a desired trajectory. The interaction forces between the subject and the orthosis are designed to be 'assist-as-needed' for safe and effective gait training. Simulations and experimental results with the force-field controller are presented. Experiments have been performed with healthy subjects walking on a treadmill. It was shown that a healthy subject could be retrained in about 45 minutes with ALEX to walk on a treadmill with a significantly altered gait. In the coming months, this powered orthosis will be used for gait training of stroke patients.
This paper describes a powered leg orthosis for gait rehabilitation of patients with walking disabilities. The paper proposes controllers which can apply suitable forces on the leg so that it moves on a desired trajectory. The description of the controllers, simulations and experimental results with the powered orthosis are presented in the paper. Currently, experiments have been performed with a dummy leg in the orthosis. In the coming months, this powered orthosis will be used on healthy subjects and stroke patients.
In this paper, we discuss the design and control strategies for an active gait rehabilitation device for the lower extrmity. This device uses gravity balancing to reduce the net torque required by the actuators during motion. Two controllers are proposed in this paper. The first uses a robust controller and the second uses a torque assisting control law. Simulations of these controllers are presented in this paper. Experiments are currently being conducted with this orthosis on healthy and stroke subjects.
A mechanism is presented that can generate insect wing like motion. This motion includes both flapping out of the stroke plane in addition to twist of the wing. The mechanism has a single degree-of-freedom and employs a five bar mechanism in addition to an auxiliary four bar mechanism. The parameters in the mechanism were optimized to generate a prescribed motion of the wing taken from a hawk moth kinematic flight data. A scaled model of the mechanism was fabricated to verify practical feasibility of the design. In future we will miniaturize this mechanism on our flying bird prototypes.