Stress-annealed nanocrystalline (SAN) materials, by applying tension during the annealing of nanocrystalline materials, achieve extremely low core loss and configurable permeability while retaining high saturation flux density. This paper adopts SAN as the core material to enhance the efficiency of high-frequency transformers in DC/DC converters. The magnetic loss and permeability characteristics of SAN cores under square-wave excitation are analyzed and compared with nanocrystalline flake ribbon (NFR) cores and ferrite cores (DMR40, N87, DMR44, and DMR95). The 100 kHz dual-active bridge (DAB) SAN transformers are designed with adjustable leakage inductance. Efficiency experiments with equal core size, permeability, and leakage inductance demonstrate that SAN transformers achieve the highest efficiency, surpassing NFR and ferrite cores across all load ranges. Under light load, the SAN-based DAB efficiency is over 1.4% higher than NFR and DMR95, and 2.4% higher than DMR40. At a 34.7° phase shift angle, the peak efficiency of the SAN-based DAB reaches 97.2%, surpassing NFR, DMR95, and DMR40 by 0.7%, 1.1%, and 1.6%, respectively. With the same phase shift angle, SAN transformers maintain over 99.1% efficiency across the entire load range, peaking at 99.6%, and remain 2.3%-2.7% more efficient than others under light load. In addition, the power density improvement of transformers is explored, revealing that SAN transformers maintain high efficiency even with a 1/3 or 1/2 volume reduction. Notably, when reduced by 1/2, SAN transformers still outperform NFR and ferrite cores and remain 1.2-1.6% higher at 0.2 load, demonstrating superior efficiency and power density for high-frequency applications.