12 June 2014 in IEEE Transactions on Terahertz Science and Technology
This paper presents a computational procedure to simulate the time-domain behavior of photoconductive antennas made of semiconductor and metal materials. Physical modeling of semiconductor devices at terahertz regime can be achieved by applying joint electronic and electromagnetic procedures, e.g., solving a coupled system of equations inferred from Poisson's drift-diffusion and Maxwell's equations. A set of discrete equations are derived by applying a combined finite-difference methodology for the previous steady-state and the finite-difference time-domain procedure for the transient regime. The results for the radiated electric field at broadside direction show good agreement with the experimental results previously reported in the literature.
9 March 2014 in Journal of Infrared, Millimeter, and Terahertz Waves
This paper shows the relevance of mobility models to describe the carrier dynamics for the analysis of radiative semiconductor photoconductive devices in the terahertz regime. We have built a simulator that self-consistently solves the device physics and Maxwell’s equations to study the radiated fields. In particular, we show a significant influence of an accurate description of the steady-state regime of the semiconductor device for calculating radiated electromagnetic fields in the broadside direction. Comparison with measurements shows the accuracy of our simulator and demonstrates the superior performance of numerical schemes based not only on the description of the carrier, electric potential, and field distributions, but also on reliable local mobility models.
1 February 2020 in Journal of Neural Engineering
Objective . Interleaving TMS (transcranial magnetic stimulation) with fMRI (functional Magnetic Resonance Imaging) is a promising technique to study functional connectivity in the human brain, but its development is being restricted by technical limitations, such as that due to the interaction of the TMS current pulses with the magnetic fields of an MRI scanner. In this work, a TMS coil design method capable of controlling Lorentz forces experienced by the coil in the presence of static magnetic fields is presented. Approach . The suggested approach is based on an existing inverse boundary element method (IBEM) for TMS coil design, in which new electromagnetic computational models of the Lorentz forces have been included to be controlled in the design process. Main results . To demonstrate the validity of this technique, it has been used for the design and simulation of TMS coils wound on rectangular flat, spherical and hemispherical surfaces with improved mechanical stability. The obtained results confirm that TMS coils with reduced Lorentz forces inside the static main field of an MRI scanner can be produced, which is achieved to the detriment of other coil performance parameters. Significance . The proposed approach provides an efficient tool to design TMS stimulators of a wide range of coil geometries with improved mechanical stability, which can be extremely useful to overcome current limitations for interleaved TMS-fMRI.
28 March 2014 in IEEE Antennas and Wireless Propagation Letters
This letter explores the influence of the geometry of bias electrodes in the performance of terahertz (THz) photoconductive antennas (PCAs). To this end, a methodology is presented to calculate numerically the operational bandwidth and radiation efficiency of the PCAs. The procedure is validated through a comparison to experimental measurements. Also, results are depicted from numerical simulations of different PCAs under varying conditions of bias voltage, doping factor, and incident optical power. It is concluded that an appropriate configuration of the electrodes may double the efficiency of the antennas, with a penalty in the bandwidth of the radiated pulse usually smaller than 10%.
28 May 2020 in Journal of Neural Engineering
JGJosé Joaquín Jurado García
José Joaquín Jurado García
Objective. Translational studies on animals play a vital role in the advancement of transcranial magnetic stimulation (TMS) as clinical technique. Nonetheless the relevance of these procedures is frequently limited by the lack of TMS systems specifically designed for small animals capable of producing comparable stimulation conditions to those found in human TMS. In this work, we propose to take advantage of the versatility of recently introduced TMS coil design methods to produce optimal rodent-specific TMS stimulators. Approach. A stream function inverse boundary element method (IBEM) has been used for producing three small sized mice-specific TMS coils of different geometries. They have been created for unilateral hemispheric stimulation of the rodent brain, and several constraints have been considered in the design process to satisfy essential performance requirements, such as minimum stored magnetic energy, minimum power dissipation, optimised maximum current density or minimization of the undesired electric field induced in non-target regions. In order to validate the presented strategy, three prototype coils have been built. The performance of each prototype has also been numerically investigated, where the electric field induced in a mouse model has been found by using an existing computational forward technique. Main results. Stream function IBEM represents an ideally suited approach for designing specific TMS coils for small animals, capable of fulfilling many essential functional and technical requirements. The prototypes produced in this work focally stimulate the right hemisphere of the mouse brain, and so they can be successfully used in lateralized TMS experiments. Significance. The design scheme proposed here can be used to produce efficient TMS stimulators for small animals, which can overcome some of the existing limitations found when producing more reliable translational experiments.
22 December 2023 in IEEE Access
This work presents a framework to develop optimal coils of arbitrary geometry for deep transcranial magnetic stimulation (dTMS). It has been based on a continuous current density inverse boundary element method to generate dTMS coils with depth control and minimum power dissipation. Novel coil geometries that readily adapted to human head have been studied to provide focal stimulation in areas on both prefrontal cortex and right temporal lobe. The designed dTMS coils performance has been numerically validated in a realistic human head model, and prototypes have been built for experimental evaluation. The numerical simulations indicate that the proposed dTMS coils focally stimulate the prescribed brain regions with the desired target depth. The calculated metrics demonstrate that the presented designs outperform existing dTMS coils (the stimulation depth can be increased more than 15%compared to conventional dTMS coils with similar focality). Continuous current density IBEM can be used to develop novel dTMS coils with improved properties for a wide range of geometries. The proposed design method opens up a possibility for exploring new coil solutions based on complex shapes to focally deliver a desired stimulation dose to relatively deep brain targets, which might allow novel and more effective brain stimulation protocols.