BioChoice lignin (BCL) is a newly commercialized pine kraft lignin from Plymouth Mill of Domtar, which is precipitated from black liquor of bleachable-grade pulp. Indulin AT is a pine kraft lignin commercialized by Meadwestvaco for the past 60 years, which is precipitated from black liquor of linerboard-grade pulp. Thus, the two technical lignins are produced under quite different conditions in terms of alkali charge and pulping time/temperature. While the chemical structure of Indulin AT is well documented, that of BCL is totally unknown. In this study, chemical structures of BCL and Indulin AT are characterized using modern analytical techniques and compared with those of pine milled wood lignin (MWL) in order to elucidate the structural changes that occur during kraft pulping and the structural differences, if any, between BCL and Indulin AT. Both BCL and Indulin AT are structurally very different from the native lignin (MWL) in wood, indicating drastic structural modification during the kraft pulping process. Surprisingly, BCL and Indulin AT are structurally very similar, in spite of the fact that they are produced under different process conditions. However, there are subtle structural differences between BCL and Indulin AT. BCL has higher phenolic hydroxyl, catechol, enol ether, and stilbene contents, but lower methoxyl and β-O-4 contents. These differences are explained by the different pulping conditions under which the two technical lignins are produced.
Lignin has shown a great potential to produce fuels, value-added chemicals, and functional materials due to its high-energy density and intrinsic aromatic-based structure. Yet, the lignin precipitation of different biomasses needs investigation because most of the work has been performed on softwood and much less is known about hardwoods. In fact, the lignin from these two wooden biomasses vary in composition and pulping performance, which can reflect on lignin precipitation. Therefore, the present study investigated the precipitation and composition of 40 distinct kraft lignins obtained from pine, acacia, sweetgum, and eucalyptus black liquors. Two lignin fractions were precipitated at different pHs, according to known industrial lignin separation practices (pH = 9.5 and 2.5) from black liquors taken at different levels of pulping. Overall, lignin recovery increased with increasing lignin concentration in the black liquor, i.e., higher amounts of lignin were obtained at higher levels of delignification. In addition, pine lignins showed superior yields than the hardwoods and were around five times purer. Among the hardwoods, lignin recovery increased with the S–G ratio of the native lignin, and eucalyptus showed the best performance by achieving the highest yields and purities. Finally, the present work compared the lignin recovery yield and the purity of softwood and different hardwood lignins in a systematic way, which will increase awareness of this underutilized green material and could potentially increase the interest in establishing new lignin plants across the globe.
Despite decades of work and billions of dollars of investments in laboratory and pilot plant projects, commercial production of cellulosic ethanol is only now beginning to emerge. Because of: (1)high technical risk coupled with; (2) high capital investment cost relative to ethanol product value, investors have not been able to justify moving forward with large scale projects on woody biomass.