7 July 2020 in The European Physical Journal D
We report on an improved test of the Universality of Free Fall using a rubidium-potassium dual-species matter wave interferometer. We describe our apparatus and detail challenges and solutions relevant when operating a potassium interferometer, as well as systematic effects affecting our measurement. Our determination of the Eötvös ratio yields ηRb,K = −1.9 × 10−7 with a combined standard uncertainty of ση = 3.2 × 10−7. Graphical
30 June 2020 in Applied Optics
We present a performance analysis of compact monolithic optomechanical inertial sensors that describes their key fundamental limits and overall acceleration noise floor. Performance simulations for low-frequency gravity-sensitive inertial sensors show attainable acceleration noise floors on the order of . Furthermore, from our performance models, we devised an optimization approach for our sensor designs, sensitivity, and bandwidth trade space. We conducted characterization measurements of these compact mechanical resonators, demonstrating -products at levels of 250 kg, which highlight their exquisite acceleration sensitivity.
30 June 2020 in Applied Optics
We discuss the design of quantum hybrid inertial sensor that combines an optomechanical inertial sensor with the retroreflector of a cold atom interferometer. This sensor fusion approach provides absolute and high-accuracy measurements with cold atom interferometers, while utilizing the optomechanical inertial sensor at frequencies above the repetition rate of the atom interferometer. This improves the overall measurement bandwidth as well as the robustness and field deployment capabilities of these systems. We evaluate which parameters yield an optimal acceleration sensitivity, from which we anticipate a noise floor at nano- levels from DC to 1 kHz.
12 August 2020 in Journal of the Optical Society of America A
We have developed an inertially sensitive optomechanical laser by combining a vertical-external-cavity surface-emitting laser (VECSEL) with a monolithic fused silica resonator. By placing the external cavity mirror of the VECSEL onto the optomechanical resonator test mass, we create a sensor where external accelerations are directly transcribed onto the lasing frequency. We developed a proof-of-principle laboratory prototype and observe test mass oscillations at the resonance frequency of the sensor through the VECSEL lasing frequency, . In addition, we set up an ancillary heterodyne interferometer to track the motion of the mechanical oscillator’s test mass, observing a resonance of . The interferometer measurements validate the VECSEL results, confirming the feasibility of using optomechanical lasers for inertial sensing.