4 October 2021 in IEEE Transactions on Instrumentation and Measurement
In many measurement applications using multicameras, there is often a nonoverlapping field of view (nFOV) between multicameras. It benefits greatly from having all of the cameras unified in a single coordinate frame by means of common spatial constraints. However, it is very difficult to establish common spatial constraints for accurate and quick calibration of the extrinsic parameters between multicameras in the case of long working distance, asymmetric working angle, or limited working space. To overcome these issues, we propose a flexible calibration method using a camera rig, which can be easily modeled as a hand–eye calibration problem and solved by only several sets of calibration images. To further improve the calibration accuracy, the camera intrinsic parameters, lens distortion coefficients, and extrinsic parameters are optimized simultaneously, similar to binocular calibration. However, this causes calculation instability of multiparameters. We extend the epipolar constraint to two images with an nFOV and add it into the optimization objective function together with the reprojection error, which ensures the basic consistency of intrinsic parameters before and after optimization, and reduce the fluctuation caused by the number of images involved in calibration. Experiments and application have proved that the proposed new methods are feasible and effective.
8 January 2021 in Optics Express
A measurement system based on a simple double-beam interferometry is built to realize the measurement of air refractive index with high accuracy. The basic principle of the system is that, through measuring the change of optical path difference caused by rapid and smooth vacuumization, measurement of refractive index of air is converted to length measurement. Error correction and signal processing are studied to ensure high-accuracy measurement of the refractive index of air. Three applicable methods are used in system. The system based on the methods realize the subdivision and counting of interference fringe by software with three-error correction, error compensation for the end-window plates’ thickness change caused by vacuumization, steady realization of high vacuum conditions. To verify the accuracy and reliability of the system, the measurement results are compared with that obtained from the method based on empirical Edlén’s formula. Analysis result shows that the expanded measurement uncertainty of the system is U = 5×10−9, with k = 2. The system can be used to compensate the laser wavelength error caused by the refractive index of air with high accuracy.
26 August 2024 in IEEE Transactions on Instrumentation and Measurement
Ring laser gyroscope is one of the most important equipment in high-precision strapdown inertial navigation systems, and has been widely used in the field of navigation. At present, there is little research on the application of ring laser gyroscope on the angle error measurement of sub-arc-second in the metrology field, and it has not been officially used as the metrology standard instrument. Aiming at the inaccurate measurement of ring laser gyroscope in metrology due to zero position drift and non-coplanar installation, a non-contact high-precision angle measurement error measurement method is proposed in this paper. Firstly, the original scale factor is calculated on the standard rotating device to avoid re-calculated on the measured device and solve the traceability problem. Secondly, the influence of the installation error between the turntable and the laser gyroscope goniometer on the angle measurement error is analyzed, and the compensation method of angle measurement error in the online measurement of the laser gyroscope is proposed. Finally, the feasibility of online metrology of ring laser gyroscope is verified by experiments, and the measurement uncertainty is estimated. The online measurement results show that compared with the photoelectric autocollimator (measurement uncertainty is U = 0.07ʺ ( k = 2), the angle measurement error of the ring laser gyroscope goniometer in multi-axis turntable is ±0.4ʺ, and the measurement uncertainty is U = 0.36ʺ ( k = 2).
26 August 2025 in IEEE Transactions on Instrumentation and Measurement
This paper gives a new application of laser gyro in the field of metrology, that is, the perpendicularity measurement method between two axes of multi-axis turntables based on single-axis laser gyro goniometer. This method skillfully establishes different coordinate frames on the turntable and uses the projection variation of the sensitive axis of the laser gyro in the coordinate frame to solve the perpendicularity. This method can also accurately solve the misalignment angle of the laser gyro goniometer at the same time. It is suitable for online measurement of perpendicularity between the axes of multi-axis turntables in fields such as CNC machine tools, robots, flight simulation, and inertial testing. This method has simple equipment installation, convenient measurement operation, high measurement accuracy (the measurement uncertainty is U = 0.23′′ (k = 2), and fully utilizes the dynamic characteristics of the laser gyro goniometer.