26 July 2021 in IEEE Transactions on Antennas and Propagation
Current artificial magnetic conductor (AMC) designs use metallic patterns on rigid substrates and focus on shapes and sizes of AMC structures, rather than on material performance, which has hindered operation bandwidth and design flexibility. Here, we introduce printed graphene AMC-based broadband and flexible microwave radar absorbers, which not only redirect but also absorb the incident wave so to broaden the operation bandwidth. Contrasting to other reported works, the phase characteristics of the AMCs are realized through the control of the surface resistance provided by printed graphene laminates. We produced a variety of AMC structures, composed of printed graphene circular ring arrays with exactly the same shape and size, but different sheet resistances. By carefully designing the sheet resistance of printed graphene laminates, the optimized anti-phase reflection cancellation between AMCs can be achieved. With printed graphene AMCs and flexible dielectric substrate, the absorber presented in this work has a broadband effective absorption (above 90% absorptivity) from 7.58 GHz to 18, is polarization insensitive under normal incident, and can work at relatively wide incident angles. Furthermore, this absorber is capable of bending easily with notable performance, which makes it ideal for applications with irregular and uneven shapes.
22 July 2019 in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
Near Field Communication (NFC) is a short-range wireless communication technique that has become attractive devices for healthcare and wellbeing monitoring. The work reported here demonstrates the development of a battery free wearable sensing system with temperature and sweat sensors embedded into and powered by a smart textile NFC antenna. The NFC antenna is seamlessly integrated with closed-body garments, and sensor data can be easily acquired by NFC readers and smart phones in order to achieve real time and wireless monitor of health status in a convenient and non-intrusive way. A Dickson charge pump circuit has been designed and implemented in order to pump up the voltage and ensure a steady voltage supply for the sweat sensor. The maximum read range for accessing sensor data is 6 cm. The on-body measurement accuracy of the temperature sensor and sweat sensor are able to achieve $\pm$ 0.14°C and $\pm$ 0.2%, respectively. The presented system can provide wearable battery-free ubiquitous wireless connectivity for point-of-care and any time healthcare and wellbeing monitoring.
24 August 2021 in IEEE Access
To date semiconductor switches are still the main enablers for electrical circuit and system reconfigurability. They however not only consume dynamic power but also dissipate static power, the former for performing on/off operation and latter for holding on/off state. These semiconductor devices are volatile and not energy efficient due to the need for holding voltage and can significantly increase the system power consumption where hundreds and thousands of switches are needed, such as in large reconfigurable intelligent surfaces and large antenna arrays. In this work, we report a non-volatile reconfigurable antenna that can switch between dual-band at 2.4 GHz and 5 GHz to a single band at 3 GHz. The measured results including reflection, gain and radiation patterns reveal promising performance, experimentally demonstrating a new approach of design and realization of RF switch integrated multi-band reconfigurable antennas. This zero-static power mechanism, along with easy fabrication on the flexible substrates would be very beneficial for Internet of Things (IoT) applications.
30 April 2019 in IEEE Journal of Radio Frequency Identification
Stretchable microfluidic sensors have recently been developed and employed in many sensing applications. However, they are still in their early stage of development and facing considerable challenges, such as practical system integration due to the limitation of costs, wired connections and sensitivity. In this work, we present a compact soft wireless battery-free RFID stretchable sensor based on microfluidic technology. The proposed RFID sensor has high sensitivity and is able to be stretched to 160% of its original size. Moreover, the sensor is completely wireless powered and battery-free. It can be fully embedded into sensor carriers such as robots to eliminate wires, reduce the weight and increase the agility. Difference to known received signal strength indicator (RSSI) techniques for RFID sensing monitoring, resonance frequency shift is used in this work, significantly increasing the measurement accuracy, usefulness and reliability for many practical applications.
6 April 2026 in IEEE Open Journal of Antennas and Propagation
In this paper, a novel tri-mode hybrid dielectric resonator antenna (DRA) designed for wireless local area network (WLAN) applications is presented. Through a special DRA design, the antenna profile is compressed to 0.05 λ0. TEy 1+δ11 and TEy 2+δ11 modes of a complex, irregular dielectric resonator are merged to provide the coverage of WLAN 5.2/5.8-GHz bands, while a quarter-wavelength monopole mode of an F-shaped metal strip is excited for the WLAN 2.4-GHz band. Meanwhile, a hybrid fabrication method has been developed including stereolithography (SLA)-based ceramic 3D printing for irregular dielectric resonator fabrication and laser-based selective metal patterning to achieve high-precision integration of metal strip lines (< 20 μm accuracy). Measured and simulated results of reflection coefficients along with radiation patterns show good agreement. 6.87% and 23.16% bandwidth coverage have been achieved for WLAN 2.4-GHz and WLAN 5.2/5.8-GHz bands respectively.