Chirag Gupta

Chirag Gupta

Auto-generated profile, based on publicly available information

Chirag Gupta

Department of Electrical and Computer Engineering, University of Wisconsin-Madison , Madison, Wisconsin 53706

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2017 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
CGChirag Gupta
Chirag Gupta
CLCory Lund
Cory Lund
SCSilvia H. Chan
Silvia H. Chan
AAAnchal Agarwal
Anchal Agarwal
JLJunquian Liu
Junquian Liu
UMUmesh K. Mishra
Umesh K. Mishra
In this letter, we report on high breakdown voltage in situ oxide, GaN interlayer-based vertical trench MOSFETs (OG-FETs) on bulk GaN substrates. Following our previous work on OG-FETs on GaN on sapphire, utilizing a low damage gate-trench etch and using bulk GaN substrates, a breakdown voltage of 990 V with an ON-resistance 2.6 mQ · cm 2 , was achieved. Without edge termination, a high breakdown field of 1.6 MV/cm was achieved in these devices.

11 October 2016 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
CGChirag Gupta
Chirag Gupta
SCSilvia H. Chan
Silvia H. Chan
YEYuuki Enatsu
Yuuki Enatsu
AAAnchal Agarwal
Anchal Agarwal
SKStacia Keller
Stacia Keller
UMUmesh K. Mishra
Umesh K. Mishra
In this letter, a novel device design to achieve both low ON-resistance and enhancement mode operation in a vertical GaN FET is demonstrated. In the traditional trench MOSFET structure, a dielectric is deposited on an n-p-n trenched structure and the channel forms via p-GaN inversion at the dielectric/p-GaN interface. However, this results in a relatively high ON-resistance due to poor electron mobility in the channel. By changing the structure to include a metal-organic chemical vapor deposition (MOCVD)-regrown Un-intentionally Doped (UID)-GaN interlayer followed by an in-situ dielectric (MOCVD Al 2 O 3 ) cap on the n-p-n trenched structure, a pathway (channel) for enhanced electron mobility is created, resulting in reduced ON-resistance. Preliminary results for this device design demonstrated almost 60% reduction in the ON-resistance and similar breakdown voltage compared with a traditional trench MOSFET structure while maintaining normally off operation with a threshold voltage of 2 V.

8 March 2018 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
DJDong Ji
Dong Ji
CGChirag Gupta
Chirag Gupta
AAAnchal Agarwal
Anchal Agarwal
SCSilvia H. Chan
Silvia H. Chan
CLCory Lund
Cory Lund
SCSrabanti Chowdhury
Srabanti Chowdhury
We present a large area in-situ oxide, GaN interlayer based vertical trench MOSFET (OG-FET) with an MOCVD regrown 10 nm UID-GaN interlayer as the channel and 50 nm in-situ Al2O3 as the gate dielectric. The threshold voltage of the device on bulk GaN substrate was 1 V measured at Ion/Ioff = 107. The OG-FET with an area scaled to 0.2 mm2 demonstrated a breakdown voltage (VBR) of 320 V and an on-state resistance (Ron)of 3.8 Ω(specific on-state resistance: Ron,sp= 7.6 mΩ∙cm2). For the single unit cell OG-FET from the same sample, VBR was as high as 700 V (measured at VGS = -10V), corresponding to a breakdown electric field of 1.4 MV/cm, and Ron,sp of 0.98 mΩ∙cm2. On our control sample was grown on sapphire substrate, a 1 A current was measured as well. These results show the potential of the OG-FET in power conversion applications.

10 August 2020 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
Shubhra PasayatShubhra Pasayat
Shubhra Pasayat
RLRyan Ley
Ryan Ley
CGChirag Gupta
Chirag Gupta
MWMatthew S. Wong
Matthew S. Wong
CLCheyenne Lynsky
Cheyenne Lynsky
UMUmesh K. Mishra
Umesh K. Mishra
In this study, two methods to tune the emission wavelength of micro-LEDs fabricated on tile patterned compliant GaN-on-porous-GaN pseudo-substrates (PSs) are presented. The mechanical flexibility of porous GaN was utilized to relax the strain induced during the growth of light-emitting diode (LED) structures with n- and p-InGaN layers and enhance the indium incorporation via the composition pulling effect. The first approach involved only varying the size of the PS square tiles used for LED structure regrowth, from 20 × 20 μm2 to 8 × 8 μm2. Higher n-InGaN base layer relaxation with decreasing tile size resulted in a red shift of emission from 525 nm to 561 nm with no change in the growth conditions. The second method involved changing the mole fraction, x, of the n-InxGa1−xN base layer of the LED structure from 0.04 to 0.09 by reducing growth temperature, while maintaining the high temperature growth conditions of the multi-quantum well (MQW) and p-InGaN targeting 530 nm emission. The resulting wavelength shift was a remarkable 536–616 nm due to the stronger composition pulling effect, providing a pathway to enable high indium content MQW active regions to be grown at high temperature.

2 November 2016 in Applied Physics Express
Verified
Journal Article
Closed access
PDF file
CGChirag Gupta
Chirag Gupta
SCSilvia H. Chan
Silvia H. Chan
CLCory Lund
Cory Lund
AAAnchal Agarwal
Anchal Agarwal
OKOnur S. Koksaldi
Onur S. Koksaldi
UMUmesh K. Mishra
Umesh K. Mishra
GaN trench-gate MOSFETs with m- and a-plane-oriented sidewall channels were fabricated and characterized. The trench-gate MOSFET performance depended strongly on the sidewall-MOS-channel plane orientation. The m-plane-oriented MOS channel devices demonstrated higher channel mobility, higher current density, lower sub-threshold slope, and lower hysteresis with similar threshold voltage and on–off ratio compared to a-plane MOS channel devices. These results indicate that orienting trench-gate MOSFET toward the m-plane would allow for better on-state characteristics while maintaining similar off-state characteristics.

26 September 2017 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
CGChirag Gupta
Chirag Gupta
SCSilvia H. Chan
Silvia H. Chan
AAAnchal Agarwal
Anchal Agarwal
NHNirupam Hatui
Nirupam Hatui
SKStacia Keller
Stacia Keller
UMUmesh K. Mishra
Umesh K. Mishra
Gate dielectric plays an integral role in advancing the performance and reliability of GaN based transistors. Si-alloying of aluminum oxide (Al2O3) dielectrics have been shown to provide a promising route to improve gate dielectric properties in GaN. In this work, we report on the first demonstration of a GaN FET with aluminum silicon oxide (AlSiO) as the gate dielectric. Vertical normally-off GaN MOSFETs were fabricated on bulk GaN substrate. Excellent DC performance was achieved with a breakdown voltage of 1.2 kV, an on-resistance of 2 mΩ.cm2, and a threshold voltage of 1.5 V (defined at IDS =1μA/mm). A high breakdown electric-field of 2.3 MV/cm was calculated in these devices. In addition to vertical GaN MOSFET results, a comparative study of Al2O3 and AlSiO based in-situ GaN MOS capacitors including TDDB characteristics is also presented.