14 March 2021 in Chemical Journal of Kazakhstan
«K«West-Kazakhstan agrarian-technical university named after Zhangir Khan»
«West-Kazakhstan agrarian-technical university named after Zhangir Khan»
The most urgent in the oil refining industry, along with the deepening of oil refining, are the problems of improving the quality of oil products, which include heavy oil residues, such as bitumen. Despite the widespread use of petroleum bitumen in road construction, the demand for bitumen is not fully satisfied, because the quality of many bituminous materials does not fully meet the modern requirements of the construction industry.Conformance of bitumen obtained by synthetic method for using it in road construction was reviewed in this article. Some main physical and chemical properties of bitumen were described. Received results meet with specification and we can make the conclusion that synthesized bitumen can be used for road surface.
30 March 2022 in Chemical Journal of Kazakhstan
The last decades of human life were marked by a sharp increase in various technological processes in the economy and everyday life. This also affected the construction industry. In accordance with this, construction is one of the priorities of the national economy and meets the basic needs of the population. In work the technology of reception of a building brick with use of a waste of polymers and rubber products is considered. Polymer bricks were obtained for processing household waste. The following properties of polymer bricks were studied: short-term strength, moisture absorption, water resistance property, heat conductivity, sound insulation. It is proved that after the addition of polymers and rubber products to the brick, the performance indicators of the brick improved.
14 March 2021 in Chemical Journal of Kazakhstan
«K«West-Kazakhstan agrariantechnical university named after Zhangir Khan»
«West-Kazakhstan agrariantechnical university named after Zhangir Khan»
The practice of operating highways in the Republic of Kazakhstan shows that the durability of asphalt concrete pavements on them is much lower than the standard terms. Therefore, the maintenance of highways in a condition that meets the requirements of traffic flows is impossible without the use of new, progressive materials and technologies. The main factor affecting a sharp decrease in the service life of road surfaces is the use of lowquality bitumen in asphalt-concrete mixtures as a binder, since microcracks develop mainly in its film. The article deals with artificially synthesized bitumens of the Aktau bitumen plant: The following indicators of petroleum bitumen were studied: penetration, extensibility properties, brittleness temperature, softening and ignition temperature. It has been proven that the results obtained correspond to the technical specifications.
30 March 2026 in Вестник КазУТБ
Благодаря совокупности эксплуатационных свойств боросиликатные стекла активно используются в изготовлении посуды для лабораторных и химических нужд, термостойких изделий и технических компонентов, в том числе для электронной и энергетической отраслей. В работе рассматриваются результаты исследования химического состава местного диатомита, мела и кварцевого песка. Проанализирована возможность использования указанных видов минерального сырья в составе стекольной шихты при получении боросиликатного стекла. Показано, что применение местных материалов является перспективным направлением, позволяющим оптимизировать состав шихты, а также снизить материальные и энергетические затраты в процессе производства.
15 December 2024 in Neft i Gaz
ZUZhangir Khan West Kazakhstan Agrarian Technical University
Zhangir Khan West Kazakhstan Agrarian Technical University
Purification of natural gas from sulfur compounds and carbon dioxide remains the main problem of its (gas) preparation for processing. In recent decades, this task has become even more urgent. Excessive entrainment of solid particles and hydrocarbons in the spent amine recirculation system leads to increased foaming in the absorber and an increase in weathering gas, which in turn leads to a decrease in the throughput of the fuel gas purification plant. One of the methods of gas purification is amine purification. An increase in the efficiency of using amine purification is possible due to the modernization of the purification unit. Based on the obtained patterns, a technology for filtering regenerated amine has been developed and investigated, which will significantly increase the energy efficiency and productivity of the process.
30 September 2026 in Химическая технология
This paper examines the feasibility of producing liquid glass using a natural siliceous raw material - flake from the Taskala deposit, located in the West Kazakhstan region of the Republic of Kazakhstan. Physicochemical analyses of the source material were performed, determining its chemical and mineralogical composition, silica content, and clay content. Chemical composition revealed a SiO2 content of 70-78%, which meets the raw material requirements for liquid glass production. The process of alkaline treatment of opoka using 20% solutions of sodium and potassium hydroxide has been studied. The temperature and time parameters affecting the completeness of silica dissolution have been studied. It has been established that at a temperature of 95-98 °C and a duration of 2-3 hours, the best result is achieved in terms of the yield of liquid glass with a silicate module within the regulatory limits when the raw material: alkali ratio is 1:2. Alkaline treatment of flasks using 20% sodium and potassium hydroxide solutions was studied. Temperature and time parameters influencing the completeness of silica dissolution were examined. It was found that a temperature of 95-98°C and a duration of 2-3 hours with a raw material: alkali ratio of 1:2 yielded the best liquid glass with a silicate modulus within the specified limits. Thus, the opoka from the Taskalinsky deposit can be effectively used as a raw material for the production of liquid glass, which has been confirmed by laboratory tests and a feasibility study of the process.