This article proposes a sensorless control strategy for medium-to-high speed range operation of switched reluctancemotors (SRMs) based on the unaligned rotor position estimation. By leveraging reluctance characteristics, the unaligned rotor position is estimated during each phase excitation period by detecting the negative zero-crossing point of the phase reluctance slope, enabling accurate rotor speed and position estimation. Under the current chopping control (CCC) mode, high-frequency pulse injection is used to compensate for the phase reluctance curve. Under angle position control (APC) mode, the advancement of the TURN-ON angle allows the negative zero-crossing point of the phase reluctance slope to be directly detected. A mode-switching strategy is proposed to ensure smooth transitions between the two modes, enabling dynamic switching between CCC and APC modes within the sensorless control framework. Additionally, a remedial measure based on fault phase skipping (FPS) is introduced to address phase failure, enabling the SRM to operate normally under phase failure conditions and improving its fault tolerance. Finally, the proposed position sensorless control strategy is validated experimentally on a six-phase SRM.
13 November 2025 in IEEE Transactions on Industrial Electronics
This article proposes a novel sensorless control method for switched reluctance motors (SRMs) operating in medium-to-high speed ranges, based on flux linkage modeling and gradient optimization. The approach first develops a flux linkage interpolation model (FLIM) by characterizing flux linkage properties at both unaligned and aligned positions, establishing a continuous flux linkage model that covers the entire positional domain, significantly simplifying traditional modeling processes. An adaptive gradient optimization method is then designed to estimate the optimal rotor position in real-time by updating interpolation functions based on flux linkage errors. Furthermore, to address phase-fault conditions, a fault-tolerant strategy called faulty-phase flux reconstruction (FPFR) is introduced, which leverages the spatial symmetry of fivephase SRMs to reconstruct flux linkage in faulty phases while maintaining stable system operation. The proposed sensorless control method has been successfully verified through experiments on a five-phase 10/8 SRM.