13 January 2023 in Optics Express
Semiconductor nanowire lasers can be subject to modifications of their lasing threshold resulting from a variation of their environment. A promising choice is to use metallic substrates to gain access to low-volume Surface-Plasmon-Polariton (SPP) modes. We introduce a simple, yet quantitatively precise model that can serve to describe mode competition in nanowire lasers on metallic substrates. We show that an aluminum substrate can decrease the lasing threshold for ZnO nanowire lasers while for a silver substrate, the threshold increases compared with a dielectric substrate. Generalizing from these findings, we make predictions describing the interaction between planar metals and semiconductor nanowires, which allow to guide future improvements of highly-integrated laser sources.
29 August 2024 in Advanced Optical Materials
Nanowire‐based plasmonic lasers are now established as nano‐sources of coherent radiation, appearing as suitable candidates for integration into next‐generation nanophotonic circuitry. However, compared to their photonic counterparts, their relatively high losses and large lasing thresholds still pose a burdening constraint on their scalability. In this study, the lasing characteristics of zinc oxide (ZnO) nanowires on silver (Ag) and aluminum (Al) substrates, operating as optically‐pumped short‐wavelength plasmonic nanolasers, are systematically investigated in combination with the size‐dependent performance of the hybrid cavity. A nanomanipulation‐assisted single nanowire optical characterization combined with high‐throughput photoluminescence spectroscopy enabled the correlation of the lasing characteristics to the metal substrate and the nanowire diameter. The results evidence that the coupling between excitons and surface plasmons is closely tied to the relationship between substrate dispersive behavior and cavity diameter. Such coupling dictates the degree to which the lasing character, be it more plasmonic‐ or photonic‐like, can define the stimulated emission features and, as a result, the device performance.
6 March 2023 in Applied Physics Letters
Tailoring the emission of plasmonic nanowire-based lasers represents one of the major challenges in the field of nanoplasmonics, given the envisaged integration of such devices into on-chip all-optical circuits. In this study, we proposed a mode selection scheme based on distributed feedback, achieved via the external coupling of single zinc oxide nanowires to an aluminum grating, which enabled a quasi-single mode lasing action. The nano-manipulation of a single nanowire allowed for a reliable comparison of lasing emission characteristics in both planar (i.e., a nanowire on the metallic substrate) and on-grating configurations. We found that, by varying the orientation of the nanowire on the grating, only when the nano-cavity was perpendicular to the ridge direction, an additional peak emerged in the emission spectrum on the low-energy side of the gain envelope. As a consequence of the fulfillment of the Bragg condition, such a peak was attributed to a hybrid mode dominating the mode competition. Simulation results showed that the hybrid mode could be efficiently waveguided along the nanowire cavity and supported by localized plasmon polaritons building up at the raised features (“fences”) on top of metal grating ridges. Moreover, the hybrid mode was found to experience an extra reflectance of nearly 50% across the grating periods in addition to that provided by nanowire end facets.
26 July 2025 in Optics Letters
Placing nanowire lasers on top of metallic substrates can shorten the duration of emitted pulses if coupling between lasing modes and Surface Plasmon Polaritons (SPPs) can be achieved. In this article, we perform time-resolved double-pump measurements of ZnO nanowires of varying diameters on aluminum substrates to investigate the relationship between nanowire diameter and emitted pulse duration. We find that nanowires with diameters below 190 nm emit pulses longer in duration than nanowires with a diameter above 190 nm. This suggests that the coupling between ZnO nanowire modes and SPPs of an aluminum substrate is suppressed for nanowires with diameters below 190 nm. We explain this behavior with the switching of the dominant lasing mode between azimuthal and linear polarization around a nanowire diameter of 190 nm. Thus, these findings highlight the importance of rigorous mode engineering in optimizing SPP coupling for low-loss metallic substrates, fostering future research on resonator design to achieve faster lasing dynamics.