7 June 2024 in IEEE Access
This paper aims to comprehensively review the literature on Gaseous Plasma Antennas (GPAs). These innovative devices transmit electromagnetic (EM) signals through ionized gas, known as plasma, instead of conventional metal structures. GPAs offer distinct advantages over their metallic counter-parts, particularly in performance reconfigurability. The paper begins by evaluating the EM properties of the plasma medium, exploring methodologies for its generation, measurement, and simulation. Subsequently, the prevalent GPA architectures are presented, distinguishing between active and passive concepts based on the plasma’s primary role: either emitting EM signals or manipulating them. Additionally, unconventional GPA implementations, such as explosive or laser-based technologies, are examined. Finally, the paper assesses the most promising applications for leveraging GPAs in various fields.
21 October 2020 in IEEE Transactions on Antennas and Propagation
In this paper, a beam steerable antenna based on plasma reflectors is presented. The proposed antenna consists of an axial mode helical antenna surrounded by an array of plasma reflector elements forming a cup shaped ground. In this configuration, the elements of the reflector array can be individually switched ON or OFF to achieve different radiation characteristics for the helical antenna. Specifically, it is shown that symmetric activation of a specified number of elements of the plasma array can be used to control the beamwidth of the antenna. Moreover, the plasma reflectors can be asymmetrically configured to steer the end-fire beam pattern of the helical antenna in 3D space. To validate the concept, the proposed antenna is designed and numerically simulated. The simulation results show that using the proposed method, the beamwidth of the proposed antenna can be changed from 37° to 50° while the beam direction can be altered in 3-dimensional space within a solid angle of ±6°. Finally, a prototype of the designed antenna is fabricated and its radiation characteristics for various configurations of the plasma reflectors are measured. Good agreement between the simulation and measurement results validates the proposed method.
6 June 2023 in Scientific Reports
This article is focused on the application of plasma technology for the development of microwave lens antennas with electronically controllable radiation gain. With this aim, the analytical background and design procedure for designing a biconcave lens based on plasma dielectric material are presented. The procedure is used to design a plasma lens antenna with a pyramidal horn feed. The effect of switching the designed lens ON and OFF on the radiation gain of the lens antenna is investigated. It is also shown that the plasma frequency of the lens can be used to dynamically adjust the radiation gain. A one-dimensional version of the proposed plasma lens operating at 10 GHz has been developed to validate the concept. Experimentally measured characteristics of a fabricated prototype of the lens antenna based on commercially available fluorescent lamps confirm the presented design procedure and numerical results. The results also show that changing the plasma frequency of the lens can be used to adjust the radiation gain of the proposed lens antenna.
14 February 2017 in IEEE Antennas and Wireless Propagation Letters
This study focuses on the effects of antenna radius and plasma frequency on the characteristics of a plasma monopole antenna in its first resonant region for reconfigurable applications. It is shown that the input impedance of a plasma monopole antenna can be modeled by a simple equivalent circuit. Variations of the equivalent lumped elements with the antenna radius and the plasma frequency are numerically approximated. The bandwidth of the plasma monopole antenna increases with increasing the antenna radius. This numerical investigation estimates the relation between the resonant length and the radius as well as the plasma frequency of the plasma antenna. The resonant length decreases by increasing the radius of the antenna and decreasing the plasma frequency. The numerical modeling shows that there is a specific band of plasma frequency for which the rate of variations of input impedance versus plasma frequency is minimal. This frequency band is the most efficient region for the plasma frequency in the application of a plasma antenna as a reconfigurable radiating element.
11 January 2022 in IEEE Transactions on Antennas and Propagation
In this paper, the propagation equations of the electromagnetic waves in an inhomogeneous plasma column are solved and the analytical estimation of the efficiency of the plasma antenna is presented. To validate the analytical results, an experimental prototype of a plasma monopole antenna is implemented while it is simulated using a commercial full-wave electromagnetic simulator. The implemented antenna can be excited by two different RF signals, at 450 MHz and 1500 MHz, with a controllable power level between 1 and 50 watts to adjust the effective length of the antenna. The proposed configuration allows both communication and excitation waves to be applied to a single coupling sleeve on the plasma column using a diplexer. Based on the measurement of the phase difference of two different positions along the column, using a phase difference detector microchip, the plasma density is estimated along the column. Good agreement between the results validates the proposed analytical method. The results show that the efficiency of a surface-wave-excited antenna strongly depends on the gas pressure, the excitation frequency, and the thickness of the tube. Therefore, for an optimized plasma antenna, all these parameters have to be properly employed.
24 June 2022 in IEEE Transactions on Antennas and Propagation
In this paper, an accurate analytical model for the calculation of the resonant length of a surface-wave-excited plasma antenna based on the distribution of the plasma density along the column is presented. In the proposed method, the propagation and attenuation constants for a surface-wave-excited plasma column are derived by solving the surface-wave propagation problem on a 3-layer tube and as a result, the distribution of the plasma density along the column is investigated. Specifically, it is shown that a plasma column acts as a slow-wave medium. Therefore, the resonant length of a plasma antenna is less than the resonant length of its metallic counterpart. For the experimental validation of the presented model, an efficient coupling structure for feeding the excitation wave to the plasma antenna is proposed that allows frequency tunability and reconfigurability of the antenna. A prototype of the proposed structure has been designed and fabricated. Good agreement between the analytical, numerical, and measurement results validates the proposed model.