29 July 2021 in Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini
The results of the analysis of the nature of chip formation in frontal and oblique cutting of soils are presented. Experimental data of soil cutting with spatially oriented knives of Professor Smirnov V.M. Where a number of experiments were carried out using knives of oblique cutting, namely: planning knife 25 cm wide; sharp knives 3,5,7 and 10 cm wide with a cutting angle of 30, 50, 70 and 90 degrees and with a rotation angle of 0 °; 22 ° 30 '; 45 ° and 67 ° 30 '. The hypothesis of chip formation at work of the spatially oriented knife of dynamic action is made.
10 October 2023 in Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini
Today, installation works occupy a significant amount of all construction works. At the same time, the efficiency of construction processes largely depends on the availability of technological equipment, its ergonomics, and dependence on accompanying construction processes. Improvement of mechanized technological equipment in practice allows to optimize the relevant construction process and obtain an economic effect [1]. Increasing the level of mechanization of construction processes is an urgent engineering task that allows improving the technological process on the construction site . It is especially relevant to develop mechanized modules that allow to improve a certain segment of the construction process, in particular to the possibility of using automated control systems. The process of improving mechanized technological equipment, as a rule, is determined by the conducted research aimed at determining the priority directions for improving such equipment and identifying potential markets, partners and competitors.
1 February 2025 in International Science Journal of Engineering & Agriculture
The paper considers the assessment of the interaction of a spatially oriented knife of a bulldozer blade with the working environment, which was carried out on the basis of a one-factor experiment using high-tech measuring and recording equipment, which allowed to quickly obtain accurate results from the primary data. Oscillogram processing consisted of determining the average maximum ordinate of the cutting force P and finding its value. Thanks to the use of the designed and developed high-precision control system for feeding and transverse movement of the working body and high-tech measuring and recording equipment, which allows to quickly and without repetition obtain sufficiently accurate estimates of the interaction of the spatially oriented blade of the bulldozer blade with the working environment from the primary data and made it possible to process them using modern software, which eliminated the time-consuming data processing process. This, in turn, made it possible to minimise the number of measurements of the cutting force at a given accuracy and reliability of the test results with a data probability of 0,9 to 0,95.
29 November 2024 in Strength of Materials and Theory of Structures
The paper uses approaches to the creation and computer testing of a model of an experimental installation for cutting soil with spatially oriented working bodies of earthmoving machines used on construction sites. Today, there is a need for the efficient performance of construction work related to the operation of construction machinery with blade equipment. This, in turn, poses the task of determining the productivity of mechanized earthworks in various working environments. The main method of mechanical soil development is cutting. The main geometric conditions are the position of the cutting wedge edge relative to the cutting direction and the surface of the massif, the contour of the cutting edge, the contour and number of working surfaces of the cutting wedge, the number of so-called side cutting surfaces and the so-called blocked cutting surfaces. The peculiarity of the digging process is that its power and energy indicators depend on the kinematic conditions and geometric parameters - thickness, width and cut area, as well as on the angles of orientation of the working body in space. The creation of such a computer model of the experimental setup is due to the need for continuous improvement of existing equipment and the creation of new equipment to meet existing needs. The model of the experimental setup was created in accordance with the working hypothesis, where the movement of the spatially oriented knife occurs perpendicular to the movement of the blade equipment, at different ratios of the speed of the blade and the movement of the knife, which creates a simple interaction with the working environment, and the deviation of the application of the full cutting force by an angle α. According to the working hypothesis, depending on the plan of movement of the spatially oriented knife, its geometric interaction with the working environment changes and the cutting force changes accordingly. The necessity to create more productive and efficient earthmoving equipment requires the use of modern design solutions. Using the calculations of soil cutting by spatially oriented earthmoving tools in the form of a dihedral blade of dump equipment, a computer study of stress equivalents, linear displacement, yield strength factor, tensile strength factor, and loss of stability factor was carried out. The results are summarized in the form of tabular data and graphical display.
26 June 2023 in Strength of Materials and Theory of Structures
The article considers an approach to determining the labor-intensiveness and duration of consolidation processes during the installation of structural blocks of the covering, which is caused by atypical structural and technological solutions. The relevance of this work is the need for a qualitative analysis of methods for calculating the labor intensity and duration of technological processes when justifying and making decisions regarding the organization and mechanization of assembly processes. Modern technologies of installation of structural blocks of coatings are analyzed. The analysis of labor costs was carried out for the option of using load-lifting assembly modules to reduce the specific share of the use of heavy crane equipment at the construction site. In comparison, the method of installing a structural coating using heavy crane equipment and load-lifting assembly modules is considered. To ensure the principle of comparison of options, the processes of column installation, stand installation, block consolidation, block installation, and installation and movement of a crane or assembly lifting and gathering modules are included in the consideration. All calculations were performed in tabular form according to the formula of the integer normalization method. Based on the results of the study, all the components of the labor intensity and duration of the processes were determined, on the basis of which the schedules of the consolidation and installation of the SBP blocks were built.
31 December 2020 in Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini
Using the sources of patent documentation, a patent search was conducted to determine the relevance of the problem of cutting the soil with spatially oriented knives when working with earthmoving machines and further analysis of the proposed technical solutions. As a result of the study, we found that the topic remains relevant for the period under consideration. It was found that different types of persons were involved in this area: individuals, scientific and educational institutions, research institutes and equipment manufacturing organizations, in particular by Caterpillar, Komatsu and John Deere, which indicates the relevance and importance of this problem. The study of cutting soils with spatially oriented knives of dynamic action is relevant for achieving a decrease in the energy consumption of the process of cutting soils. The proposed research direction is a continuation of the scientific schools of the Department of Construction Machines KNUBA, namely, dynamic cutting and creation of cutting elements of earth-moving machines with spatial orientation.