Mykola Prystailo

Mykola Prystailo

Auto-generated profile, based on publicly available information

Mykola Prystailo

Kyiv National University of Construction and Architecture Kyiv Povitryanykh Syl Avenue 31 03037

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2021 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
VLViacheslav Loveikin
Viacheslav Loveikin
KPKostiantyn Pochka
Kostiantyn Pochka
MPMykola Prystailo
Mykola Prystailo
MBMaksym Balaka
Maksym Balaka
OPOlha Pochka
Olha Pochka
The impact of the cranks displacement angle on the motion non-uniformity is determined for three forming trolleys of a roller forming unit with an energy-balanced drive mechanism. At the same time, the specified unit is presented by a dynamic model with one freedom degree, where the extended coordinate is taken as the angular coordinate of the crank rotation. For such a model, a differential equation of motion is written, for solved which a numerical method was used. The inertia reduced moment of the whole unit, and the resistance forces moment, reduced to the crank rotation axis, to move of forming trolleys during the formation of products from building mixtures are determined, and also the nominal rated power of the electric motor was calculated, when solved a differential equation of motion. According to these data, asynchronous electric motor with a short-circuited rotor was chosen, for which a mechanical characteristic is constructed by the Kloss formula. Having solved the differential equation of motion with all defined characteristics, we obtain the change function of the crank angular velocity from start-up moment and during steady motion mode. After that, we calculated the time corresponding to the angular velocity value, and obtained the change function of the crank angular acceleration from start-up moment and during steady motion mode. The motion non-uniformity of the roller forming unit has been determined by the motion non-uniformity factor, the motion dynamism factor and the extended factor of motion assessment during steady motion mode. The impact of drive cranks displacement angle on the motion non-uniformity has been traced, as a result, the specified factors have the minimum values at cranks displacement on the angle Δφ=60°. The results may in the future are used to refine and improve the existing engineering methods for estimating the drive mechanisms of roller forming machines, both at design stages and in practical use.

1 February 2025 in International Science Journal of Engineering & Agriculture
Verified
Journal Article
Open access
PDF file
VRVolodymyr Rashkivskyi
Volodymyr Rashkivskyi
MPMykola Prystailo
Mykola Prystailo
BFBohdan Fedyshyn
Bohdan Fedyshyn
MBMaksym Balaka
Maksym Balaka
The paper considers the assessment of the interaction of a spatially oriented knife of a bulldozer blade with the working environment, which was carried out on the basis of a one-factor experiment using high-tech measuring and recording equipment, which allowed to quickly obtain accurate results from the primary data. Oscillogram processing consisted of determining the average maximum ordinate of the cutting force P and finding its value. Thanks to the use of the designed and developed high-precision control system for feeding and transverse movement of the working body and high-tech measuring and recording equipment, which allows to quickly and without repetition obtain sufficiently accurate estimates of the interaction of the spatially oriented blade of the bulldozer blade with the working environment from the primary data and made it possible to process them using modern software, which eliminated the time-consuming data processing process. This, in turn, made it possible to minimise the number of measurements of the cutting force at a given accuracy and reliability of the test results with a data probability of 0,9 to 0,95.

29 November 2024 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
YMYurii Maksymiuk
Yurii Maksymiuk
VRVolodymyr Rashkivskyi
Volodymyr Rashkivskyi
MPMykola Prystailo
Mykola Prystailo
BFBohdan Fedyshyn
Bohdan Fedyshyn
The paper uses approaches to the creation and computer testing of a model of an experimental installation for cutting soil with spatially oriented working bodies of earthmoving machines used on construction sites. Today, there is a need for the efficient performance of construction work related to the operation of construction machinery with blade equipment. This, in turn, poses the task of determining the productivity of mechanized earthworks in various working environments. The main method of mechanical soil development is cutting. The main geometric conditions are the position of the cutting wedge edge relative to the cutting direction and the surface of the massif, the contour of the cutting edge, the contour and number of working surfaces of the cutting wedge, the number of so-called side cutting surfaces and the so-called blocked cutting surfaces. The peculiarity of the digging process is that its power and energy indicators depend on the kinematic conditions and geometric parameters - thickness, width and cut area, as well as on the angles of orientation of the working body in space. The creation of such a computer model of the experimental setup is due to the need for continuous improvement of existing equipment and the creation of new equipment to meet existing needs. The model of the experimental setup was created in accordance with the working hypothesis, where the movement of the spatially oriented knife occurs perpendicular to the movement of the blade equipment, at different ratios of the speed of the blade and the movement of the knife, which creates a simple interaction with the working environment, and the deviation of the application of the full cutting force by an angle α. According to the working hypothesis, depending on the plan of movement of the spatially oriented knife, its geometric interaction with the working environment changes and the cutting force changes accordingly. The necessity to create more productive and efficient earthmoving equipment requires the use of modern design solutions. Using the calculations of soil cutting by spatially oriented earthmoving tools in the form of a dihedral blade of dump equipment, a computer study of stress equivalents, linear displacement, yield strength factor, tensile strength factor, and loss of stability factor was carried out. The results are summarized in the form of tabular data and graphical display.


26 June 2023 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
YMYuriy Maksimyuk
Yuriy Maksimyuk
KPKostyantyn Pochka
Kostyantyn Pochka
YAYuriy Abrashkevych
Yuriy Abrashkevych
MPMykola Prystailo
Mykola Prystailo
APAndriy Polishchuk
Andriy Polishchuk
In order to carry out experimental studies of the process of cutting highly abrasive materials with abrasive reinforced wheels, a dynamometer stand for registering the force load of the author's design of the KNUCA was modified, which made it possible to conduct full-fledged experimental studies taking into account all the valid factors of the interaction of the working environment and the working body during cutting with the supply of water to the cutting zone to dedust the working process The use of refractory bricks is proposed as the working environment, and the abrasive reinforced wheel for cutting highly abrasive materials with a strength of up to 60MPa is used as the working body. As a result of the research conducted for the dynamometric stand for force load registration during the study of the process of cutting highly abrasive materials with an abrasive reinforced wheel, the tangential forces that perform the work of destruction and overcoming friction between the side surfaces of the wheel and the material were analytically determined. According to the results of theoretical studies, it was established that the limits of the change in the resistance to cutting, determined for a natural installation for cutting highly abrasive materials (refractories) with an abrasive reinforced wheel and for a laboratory stand, are the same, and the nature of their change is also similar and related by a similarity coefficient. In order to check the adequacy of theoretical calculations, experimental studies of cutting refractory bricks with temporary resistance to uniaxial compression of the rock σв=60 MPa were carried out on a dynamometric stand. The conducted experimental studies fully confirm the adequacy of the theoretical calculations, and the comparison of the theoretical and experimental results of determining the tangential cutting forces showed their sufficient convergence and, accordingly, the legitimacy of using analytical expressions when calculating the power parameters of machines with an abrasive tool. The maximum value of the error in determining the tangential cutting forces theoretically and experimentally on the laboratory bench for recording the cutting forces of highly abrasive materials with abrasive reinforced wheels is Δδ=13,8%.

25 December 2023 in Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini
Verified
Journal Article
Open access
PDF file
MPMykola Prystailo
Mykola Prystailo
MBMaksym Balaka
Maksym Balaka
VMValentyn Mozharivskyi
Valentyn Mozharivskyi
VDVolodymyr Drachuk
Volodymyr Drachuk
IHIhor Honta
Ihor Honta
ІГІгор Гонта
Ігор Гонта
The bulldozer-ripper is the main machine during preliminary work. The creation of high-performance machines is carried out in two directions: the production of fundamentally new working elements and machines based on the use of fundamental scientific achievements and the improvement of existing working elements, and traditional type machines that are in operation. The creation of working elements for ripper-picks is a perspective development direction of machines designed for ripping frozen and hard soils. They would make it possible to significantly increase the productivity of ripping work through the rational use of the base machine traction force. We applied the superposition principle of the impact on the working medium of several factors concurrently for this, such as static and dynamic loads, through the energy accumulation and its subsequent use to create a high-speed power impulse on the cutting edge to ensure the preliminary formation of the compressed zone in the soil massif. This will lead to the power intensity reduction of the static load on the soil element separation.