This article presents a highly integrated, supply, temperature, and interference-robust, event-driven wake-up receiver (WuRx) achieving $< -78.3$ -dBm sensitivity using a custom-designed antenna at 4.9 GHz or $< -72.3$ -dBm sensitivity when matched to a 50- $\Omega $ source at 5.3 GHz, consuming 184 nW at room temperature. The chip is fabricated in 65-nm CMOS LP technology and powered by a single supply. A novel slot antenna is proposed to directly conjugate match to the input of the chip and eliminate lossy impedance matching networks. The integrated references and regulation enable the receiver to operate for a wide range of temperatures from $-30\,\,^\circ \text{C}$ to 70 $^\circ \text{C}$ and a supply range from 1.2 to 1.5 V. The integrated proportional–integral–derivative (PID) control module allows the WuRx to automatically adapt for different temperatures and interference signals present in the ambient environment.
10 April 2024 in IEEE Open Journal of the Solid-State Circuits Society
This paper presents a binary frequency-shift keying (BFSK) heterodyne wake-up receiver (WuRx) with -102 dBm sensitivity at 2.4 GHz. An integrated low-power all-digital phase-locked loop (ADPLL) allows sharp filtering at the intermediate frequency (IF) to improve sensitivity and interference robustness. The WuRx achieves an average current consumption of 2.2 μA to 171 μA range at 16 s to 0.1 s latency with the packet-level-duty-cycling scheme. In addition, it supports up to 60 channels from 2.300 GHz to 2.536 GHz. A signal-to-interference ratio (SIR) of -27/-30/-46 dB is achieved at 3/5/25 MHz offset from the carrier.