1 October 2014 in Electronics Letters
The performance improvements for integrated circuit applications of silicon‐on‐insulator (SOI) metal–oxide semiconductor field‐effect transistors (MOSFETs) implemented with diamond layout style (hexagonal gate geometry) are quantified, thanks to the longitudinal corner effect and parallel association of MOSFETs with different channel lengths effect contributions. Futhermore, an accurate analytical drain current model for planar diamond SOI MOSFET for micrometre scale effective channel lengths is proposed and validated. The concept is then extended by 3D simulations for the 150 nm node fully‐depleted SOI n ‐channel MOSFETs.
26 June 2017 in IEEE Transactions on Device and Materials Reliability
This letter describes an experimental comparative study of the total ionizing dose (TID) effects due to Co-60 gamma irradiation between hexagonal (Diamond) and conventional rectangular gates metal-oxide semiconductor field-effect transistors (MOSFETs), regarding the same bias conditions during irradiation. The transistors were manufactured by using the 350 nm commercial bulk complementary metal-oxide semiconductor (CMOS) integrated-circuits (ICs) technology. The innovative hexagonal gate layout proposal can reduce the parameter deviations of TID effects in MOSFETs in, approximately, 30%, 400%, and 100% in terms of the threshold voltage, leakage drain current, and subthreshold slope, respectively, regarding the standard MOSFET counterparts. Therefore, the Diamond MOSFET can be considered as a low-cost alternative device to be used in space CMOS ICs applications.
9 March 2025 in Applied Soft Computing
1 February 2014 in Electronics Letters
A way to improve the metal–oxide–semiconductor field effect transistor (MOSFET) analogue electrical performance, still little explored, is to modify their aspect form or ratio (AR) by the use of innovative layout styles. The diamond MOSFET (DM) is an example of this approach. It presents hexagonal gate geometry. This new layout structure for MOSFET induces two additional effects in comparison with the conventional (i.e. rectangular gate geometry) MOSFET (CM) counterpart, which improves the device's electrical performance: the longitudinal corner effect (LCE) and parallel association of MOSFET with different channel length effect (PAMDLE). How the diamond layout style (DLS) can significantly enhance the device's frequency response (FR) by using two different integrated circuits’ (IC) complementary metal–oxide–semiconductor (CMOS) manufacturing process technologies (bulk and silicon‐on‐insulator (SOI)) is demonstrated.
1 December 2015 in Microelectronic Engineering
16 June 2021 in IEEE Transactions on Electron Devices
This article presents, for the first time, a study about of behavior of the intrinsic effects from diamond layout style [longitudinal corner effect (LCE) and PArallel connection of MOSFETs with Different channel Lengths Effect (PAMDLE)] for metal–oxide–semiconductor field-effect transistors (MOSFETs) influenced by wide high-temperature ranges. These effects are capable of boosting the electrical performance of analog MOSFETs in relation to that of the standard MOSFET (rectangular gate shape). First, we have developed an experimental comparative study between MOSFETs implemented with the hexagonal layout style diamond MOSFET (DM) and its rectangular MOSFET (RM) counterpart, regarding that they present the same channel width and gate area, operating in a wide high-temperature range (from 300 to 573 K). These devices were manufactured with the technology of bulk complementary MOS (CMOS) integrated circuits (ICs) of 180 nm. The experimental results have shown that DM has obtained a better electrical performance of analog MOSFETs than the one observed in RM counterpart (for example, gains of 67% for saturation drain current and 90% for the transconductance), regardless of temperatures in which they were exposed. 3-D numerical simulations were used to justify the better electrical performance of DMs due to the LCE and PAMDLE effects, in relation to one of the RM counterparts, by observing the behavior of electrostatic potentials, longitudinal electric fields, and drain current densities of the devices as the temperature increases. Besides, a study about the short-channel effect has shown that DM can suppress this effect more effectively than RM at room temperature due to a smaller reduction in effective channel length of DM.