A self-passivating cathode/electrolyte interface achieves stable, room-temperature long-term cycling of 4 V-class Na3(VOPO4)2F|Na4(CB11H12)2(B12H12)|Na all-solid-state sodium batteries with the highest reported discharge cell voltage and cathode-based specific energy.
Hydroborate‐based solid electrolytes have recently been successfully employed in high voltage, room temperature all‐solid‐state sodium batteries. The transfer to analogous lithium systems has failed up to now due to the lower conductivity of the corresponding lithium compounds and their high cost. Here LiB11H14nido‐hydroborate as a cost‐effective building block and its high‐purity synthesis is introduced. The crystal structures of anhydrous LiB11H14 as well as of LiB11H14‐based mixed‐anion solid electrolytes are solved and high ionic conductivities of 1.1 × 10−4 S cm−1 for Li2(B11H14)(CB11H12) and 1.1 × 10−3 S cm−1 for Li3(B11H14)(CB9H10)2 are obtained, respectively. LiB11H14 exhibits an oxidative stability limit of 2.6 V versus Li+/Li and the proposed decomposition products are discussed based on density functional theory calculations. Strategies are discussed to improve the stability of these compounds by modifying the chemical structure of the nido‐hydroborate cage. Galvanostatic cycling in symmetric cells with two lithium metal electrodes shows a small overpotential increase from 22.5 to 30 mV after 620 h (up to 0.5 mAh cm−2), demonstrating that the electrolyte is compatible with metallic anodes. Finally, the Li2(B11H14)(CB11H12) electrolyte is employed in a proof‐of‐concept half cell with a TiS2 cathode with a capacity retention of 82% after 150 cycles at C/5.
Development of low-resistance electrode/electrolyte interfaces is key for enabling all-solid-state batteries with fast-charging capabilities. Low interfacial resistance and high current density were demonstrated for Na-β′′-alumina/sodium metal interfaces, making Na-β′′-alumina a promising solid electrolyte for high-energy all-solid-state batteries. However, integration of Na-β′′-alumina with a high-energy sodium-ion intercalation cathode remains challenging. Here, we report a proof-of-concept study that targets the implementation of a Na-β′′-alumina ceramic electrolyte with a slurry-casted porous NaCrO2 cathode with infiltrated sodium hydroborates as secondary electrolyte. The hydroborate Na4(B12H12)(B10H10) possesses similar sodium-ion conductivity of 1 mS cm−1 at room temperature as Na-β′′-alumina and can be fully densified by cold pressing. Using the Na4(B12H12)(B10H10) secondary electrolyte as interlayer between Na-β′′-alumina and NaCrO2, we obtain a cathode-electrolyte interfacial resistance of only 25 Ω cm2 after cold pressing at 70 MPa. Proof-of-concept cells with a sodium metal anode and a NaCrO2 cathode feature an initial discharge capacity of 103 mAh g−1 at C/10 and 42 mAh g−1 at 1 C with an excellent capacity retention of 88% after 100 cycles at 1 C at room temperature. Ion-milled cross-sections of the cathode/electrolyte interface demonstrate that intimate contact is maintained during cycling, proving that the use of hydroborates as secondary electrolyte and as an interlayer is a promising approach for the development of all-solid-state batteries with ceramic electrolytes.