Zhe Liu

Zhe Liu

Auto-generated profile, based on publicly available information

Zhe Liu

Centre for Integrated Circuits and Systems, School of Electrical and Electronic Engineering, Nanyang Technological University, Jurong West, Singapore

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZLZhe Liu
Zhe Liu
CBChirn Chye Boon
Chirn Chye Boon
XiaoPeng YuXiaoPeng Yu
XiaoPeng Yu
CLChenyang Li
Chenyang Li
KYKaituo Yang
Kaituo Yang
YLYuan Liang
Yuan Liang
This article proposes a novel wideband common-gate (CG) common-source (CS) low-noise amplifier (LNA) with active feedforward for simultaneous current and noise reduction. By employing an active feedforward stage in the main path, the current dissipation and the thermal noise are effectively suppressed, while the noise and distortion cancelation properties of CG-CS topology are preserved. Moreover, no extra noise is introduced since the additional g m -boost amplifier follows the same noise-canceling (NC) principle as the CG amplifier, and its noise can be fully canceled at the output theoretically. Thus, the proposed LNA benefits from the g m -boosting and NC technique simultaneously to obtain a good tradeoff between gain, noise figure (NF), and power consumption. Fabricated in standard 40-nm CMOS technology, the measured results show the proposed LNA exhibits a peak gain of 17 dB, NF of 3.5-5.5 dB from 1 to 11 GHz and an IIP3 of -2.8 dBm at 6 GHz. It consumes 9 mW from a 1.2-V supply and occupies a very compact die area of 0.061 mm 2 .

1 March 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YDYangtao Dong
Yangtao Dong
LKLingshan Kong
Lingshan Kong
CBChirn Chye Boon
Chirn Chye Boon
KYKaituo Yang
Kaituo Yang
ZLZhe Liu
Zhe Liu
AZAo Zhou
Ao Zhou
This article presents a wideband dB-linear variable-gain amplifier (VGA) with a compensated negative pseudo-exponential generation (C-NPEG) technique for high-speed applications. By shifting the concave and the convex function of an original negative pseudo-exponential generator (NPEG), two additional control signals are produced to manipulate two variable-gain Gilbert-cell-based amplifiers, respectively. Cascading these two stages with another variable gain stage controlled by the original NPEG, the multiplication of three different but mutually compensated control signals is realized. As a result, the dB-linear gain range of the overall VGA is extended, and the gain error is suppressed with the proposed C-NPEG technique. To further improve the VGA's gain while maintaining a wide bandwidth, a fixed-gain stage utilizing five common-source amplifiers with RC-degeneration and active feedback is implemented. Fabricated in 40-nm CMOS technology, the core circuit consumes 24.6-mA current (excluding the output buffer) under a power supply of 1.1 V and occupies an active die area of 0.038 mm 2 . The measured gain of the overall VGA varies from -34 to 17 dB, while the dB-linear gain error over the 51-dB gain range is within ±1 dB. Meanwhile, the -3-dB bandwidth is relatively constant from 7 to 8 GHz under different gain settings.

22 June 2022 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
ZLZhe Liu
Zhe Liu
CBChirn Chye Boon
Chirn Chye Boon
This brief proposes a broadband noise-cancelling (NC) common-gate (CG)-common-source (CS) low-noise amplifier (LNA) with a passive network to improve the gain and noise performance simultaneously. In the CG-CS LNA with active feedforward, a current-bleeding (CBLD) circuit is required to provide the required DC current of the auxiliary amplifier, which introduces additional noise. In the proposed work, by adding a passive network at the output, the noise of the CBLD circuit can be made negligible. Moreover, the passive network also provides the shunt peaking to facilitate the gain and noise performance over the desired band. Fabricated in TSMC 40 nm CMOS technology, the measured results show the proposed LNA exhibits a gain of 16.5 – 19.5 dB, a noise figure (NF) of 3.2 – 5.2 dB from 2 to 12 GHz and an IIP3 of −3.5 dBm at 6 GHz. It consumes 9 mW from a 1.2 V supply and occupies a very compact die area of 0.092 mm2.

14 June 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
ZLZhe Liu
Zhe Liu
CBChirn Chye Boon
Chirn Chye Boon
YDYangtao Dong
Yangtao Dong
This paper proposes an inductorless wideband common-gate (CG)-common-source (CS) noise-cancelling (NC) low-noise amplifier (LNA) with current reuse (CR) for ultra-low voltage (ULV) application. In the conventional NC LNA with CR, to reuse the DC current of the auxiliary amplifier, three transistors are stacked in a single branch, leading to a reduced voltage headroom. Moreover, additional inductor and capacitors are required, resulting in a large silicon area. In the proposed work, the DC current of the auxiliary amplifier can be reused without using any inductor. Meanwhile, only two transistors are stacked in a single branch, making it suitable for ULV application. Fabricated in 28 nm CMOS, this work exhibits a voltage gain of 20 dB with a 3-dB bandwidth of 0.2 to 2.85 GHz, a minimum NF of 2.9 dB at 1.7 GHz and an IIP3 of -12.3 dBm at 1 GHz. It consumes 1.74 mW from a 0.6 V supply and occupies a very compact die area of 0.0048 mm $^{2}$ .

14 May 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
YDYangtao Dong
Yangtao Dong
CBChirn Chye Boon
Chirn Chye Boon
XDXin Ding
Xin Ding
CLChenyang Li
Chenyang Li
ZLZhe Liu
Zhe Liu
This brief presents a bidirectional nonlinearly coupled quadrature voltage-controlled oscillator (BNC-QVCO) incorporating passive phase interpolation for the generation of multiphase signals. In addition, to generate multiphase signals, the proposed bidirectional nonlinearly coupling network improves the phase noise performance of the QVCO by producing approximate-in-phase injection-coupling currents into the LC tank. Moreover, to balance the amplitude of eight-phase signals, an additional passive amplitude division circuit is implemented with capacitor banks for calibration. For verification, a BNC-QVCO incorporating passive phase interpolation is implemented in a 40-nm CMOS technology with a core area of 0.13 mm 2 . The measured multiphase signals achieve a phase noise of -116.57 dBc/Hz at 1-MHz offset from 4.32 GHz. The power consumption without buffers is 10.2 mW under 1-V supply voltage and a 20% frequency tuning range from 4 to 4.8 GHz is achieved with the implemented digitally controlled capacitor banks.

22 June 2023 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YDYangtao Dong
Yangtao Dong
CBChirn Chye Boon
Chirn Chye Boon
ZLZhe Liu
Zhe Liu
KYKaituo Yang
Kaituo Yang
This article presents a 2-GHz dual-path subsampling phase-locked loop (SSPLL) with ring voltage-controlled oscillator (VCO) phase noise suppression (PNS). In addition to the conventional subsampling charge pump (SSCP), a high-pass path from the subsampling phase detector (SSPD) to the low-pass filter (LPF) is implemented in the proposed SSPLL. Due to this dual-path architecture, a new in-band zero and pole are introduced into the open-loop transfer function (zero frequency is smaller than the pole frequency), which extends the open-loop unit-gain bandwidth without sacrificing the phase margin. Consequently, the phase noise contribution of the ring VCO is suppressed while the loop stability is ensured. Meanwhile, the phase noise contribution of the high-pass path is negligible compared to the reference and ring VCO’s contribution. Measurement results show that the SSPLL’s closed-loop bandwidth is extended to around 6 MHz with a reference of 20 MHz and the jitter is reduced by 1.34 $\times$ (from 3.52 to 2.63 ps) with a maximum noise suppression of 6.5 dB at the 1.1-MHz offset. The PNS path consumes 0.16 mW and no delay line or calibration is needed, which results in a relatively high FoM $_{\mathrm{PNC}}$ value of 40.5 dB.