AC vector magnetometers have recently become increasingly widespread. The calibration of AC vector magnetometers before use is critical. Based on traditional ellipsoid fitting, which is suitable for calibrating DC vector magnetometers, a method suitable for calibrating AC vector magnetometers is presented. Simulation analysis and experimental verification demonstrate that this method is effective in calibrating AC vector magnetometers, including scaling factors, angular misalignments and offset errors.
29 April 2021 in IEEE Transactions on Instrumentation and Measurement
Magnetic sensor array has become increasingly widespread in use. Because of the manufacturing process, magnetic sensors in an array inevitably experience calibration factor errors. Therefore, the calibration of a magnetic sensor array is very important before use. However, it lacks explicit and quantitative measures on how to calibrate a magnetic sensor array. By using magnetic fields produced by a standard magnetic source at different locations, a practicable method was proposed based on the least-squares method to calibrate a magnetic sensor array. The dimensions of sensor array are about 50×50×50 cm 3 and the level of magnetic field aiming to be measured is ~nT. Both the simulation and experimental results demonstrate that the proposed method is effective in identifying the calibration factor of a magnetic sensor array.
4 January 2021 in Journal of Geophysical Research: Space Physics
Ring current decay during storm recovery phase may be affected by different loss processes. In this study, we have investigated the lifetimes of ring current ions (H+ and O+) of energies from 1 keV to several hundred keV at L shell from 3 to 6 during the storm recovery phase through a statistical survey. The observational data of 48 geomagnetic storms from March 2013 to May 2019 are collected based on Van Allen Probe observations. We find that (1) the observed lifetimes of H+ and O+ in general increase with L shell and (2) the lifetimes of H+ is short than that of O+ when E < ∼50 keV while the situation is reversed when E > ∼50 keV. In addition, we have made use of the charge exchange theory, combined with previous experimental results on the charge exchange cross section and two distribution models of neutral hydrogen atoms in the exosphere, so as to directly estimate the ring current ions decay caused by charge exchange mechanism only. Through the comparison between the model predictions of charge exchange lifetime and the observed lifetimes, we find that (3) the observed lifetimes are in general consistent with model results, which confirms that charge exchange is a dominant loss mechanism of ring current ions during storm recovery phase.
The internal charging effect may lead to electrostatic discharges (ESDs) for Geostationary Earth Orbit (GEO) and Middle Earth Orbit (MEO) satellites. This is due to the high-energy electrons that deposit in the dielectrics of satellites. The properties of the dielectrics such as permittivity and dark conductivity dominate this effect. This may contribute to the ESD risk of long-lifetime satellites if these properties change with the increase of electron dose. Two general materials, Polyimide (PI) and FR4 Epoxy Glass Cloth (FR4), were chosen as samples to study by experiments with different doses. The results show that the permittivity of PI and FR4 decreased as the dose increased while the dark conductivity increased. Numerical simulation evaluates the electron dose and the ESD risk of dielectrics under the electron environment of a specific MEO electron spectrum. The results show that the decrease of permittivity and the increase of dark conductivity will shorten the time constant of internal charging. The quicker build-up of electric field will increase the ESD risk if it exceeds the breakdown threshold.