1 February 2020 in Journal of Performance of Constructed Facilities
Structural deformation and damages may occur in existing tunnels because of new tunneling underneath. There is limited research on the interaction between overlying tunnels and large-diameter slurry shields in soft clay. This paper presents a case on the response of existing metro tunnels to large-diameter slurry shield underpassing in the muddy clay of Hangzhou, China. Through long-term displacement monitoring, displacement characteristics of existing tunnels during and after new tunnel construction were analyzed. Unusual tunnel heaves were observed after the passing of the shield tail because of the buoyancy effect. The existing tunnels heaved with the shape of an inverted , which was well-described with the Gaussian curve. The location of maximum tunnel heave was affected by the skew angle between the new and existing tunnels. Because the overburden pressure decreased in the under-crossing area, increased maximum ground heaves were observed. The adopted countermeasures for controlling tunnel heave were introduced and analyzed. By controlling the uplift of the new tunnels, excessive tunnel heave can be prevented. Increasing the clearance between the new and existing tunnels and optimizing the grouting parameters can diminish tunnel heave effectively. Long-term tunnel settlement caused by grout and soil consolidation developed considerably after shield underpassing. Decreased tunnel settlement and increased differential settlement could be observed during the second shield undercrossing. Detailed monitoring data and analysis provided useful experience for similar projects.
1 January 2021 in Advances in Civil Engineering
Nowadays, a huge number of shield‐driven tunnels with noncircular cross sections are constructed in urban areas all around the world. However, the ground displacements associated with tunneling still form a difficult issue, especially for noncircular tunnels. In this study, an analytical solution is derived to estimate the ground displacements induced by the deformations of shallow noncircular tunnels in soft ground. First, a solution for the stresses and displacements around a deep tunnel in a full plane is formulated by imposing a specified convergence pattern over the cavity boundary. Subsequently, this solution is validated using finite element simulations in a case study of an elliptical tunnel with four different convergence patterns. Afterward, the solution in the full plane is extended to a half plane using the virtual image technique to estimate the ground displacements around shallow tunnels. The solution is also validated using finite element simulations.
1 January 2021 in Advances in Civil Engineering
Based on complex variable theory and conformal mapping method, the paper presents full plane elastic solutions around an unlined tunnel with arbitrary cross section in anisotropic soil. The solutions describe soil elastic solutions for assuming that the displacement vectors along the tunnel boundary are directed towards the center of the tunnel. Tunnels with different cross sections are used to illustrate the method and its correctness. An elliptical unlined tunnel case is discussed in detail in the paper. Using the image method, an approximate solution for predicting surface displacement and subsurface horizontal displacement around an unlined tunnel in anisotropic soil can be obtained. The results show anisotropic stiffness properties n (n = Eh/Ev) and m (m = Gvh/Ev) have a great effect on the displacement distribution patterns around an elliptical tunnel with certain shape.