27 February 2023 in Journal of Rock Mechanics and Geotechnical Engineering
17 March 2021 in Geofluids
This paper proposes a new method for predicting the displacement and internal force of constructed tunnels induced by adjacent excavation with dewatering. In this method, the total excavation-induced additional stress on the constructed tunnel is derived by superposing the additional stresses induced by excavation unloading and dewatering effects. The additional stress induced by unloading effect is calculated using Mindlin’s solution. The additional stress induced by dewatering effect is calculated using the principle of effective stress and the Dupuit precipitation funnel curve. With the beam on elastic foundation method, the total additional stress is then used for calculating the tunnel displacement and internal force caused by adjacent excavation with dewatering. Based on three well-documented case histories, the performance of the proposed method is verified. Moreover, a parametric analysis is also performed to capture the effects of excavation depth, tunnel-to-excavation distance, initial water level, excavation plan view size, and specific yield on the responses of the constructed tunnels. The results indicate that the effect of excavation depth on the tunnel maximum vertical displacement, maximum bending moment, and maximum shear force is more significant at an excavation depth greater than the cover depth of the constructed tunnel. The tunnel maximum vertical displacement, maximum bending moment, and maximum shear force decrease nonlinearly with an increase in the tunnel-to-excavation distance and the initial water level. Among the investigated parameters, the excavation dimension in the tunnel longitudinal direction affects most the tunnel responses. The effect of specific yield on the tunnel displacement and internal force induced by adjacent excavation with dewatering becomes more obvious as increasing the initial water level and excavation depth.
3 December 2022 in Acta Geotechnica
20 March 2021 in Geofluids
This paper investigates the influence of the structured property of loess on its compressive behaviour and proposes a new method for determining the preconsolidation pressure of structured loess soil. A series of oedometer tests were carried out on undisturbed and remoulded loess samples prepared at various moisture contents. The effects of moisture content on the structured yield stress, the preconsolidation pressure, and the structural strength were also captured. It was found that the influence of the structured property of loess on the compression behaviour is divergent between undisturbed and remoulded loess samples. The discrepancy before and after structural yielding is more remarkable for the undisturbed soil. The Casagrande method realized through the MATLAB program can effectively eliminate human factors and accurately calculate the corresponding preconsolidation pressure for undisturbed soil. The effects of moisture content on the method for determining the preconsolidation pressure considering the structured property of loess were discussed. The determination method can accurately evaluate the loess consolidation state in loess regions. The influencing rules which the moisture content exerts on the structured yield stress, the preconsolidation pressure, and the structural strength all conform to exponential functions. The study is of great significance to correctly differentiating the foundation consolidation states and calculating the ground settlement in loess regions.
1 January 2021 in Advances in Civil Engineering
Nowadays, a huge number of shield‐driven tunnels with noncircular cross sections are constructed in urban areas all around the world. However, the ground displacements associated with tunneling still form a difficult issue, especially for noncircular tunnels. In this study, an analytical solution is derived to estimate the ground displacements induced by the deformations of shallow noncircular tunnels in soft ground. First, a solution for the stresses and displacements around a deep tunnel in a full plane is formulated by imposing a specified convergence pattern over the cavity boundary. Subsequently, this solution is validated using finite element simulations in a case study of an elliptical tunnel with four different convergence patterns. Afterward, the solution in the full plane is extended to a half plane using the virtual image technique to estimate the ground displacements around shallow tunnels. The solution is also validated using finite element simulations.