Ferroelectric Al1−xScxN has raised much interest in recent years due to its unique ferroelectric properties and complementary metal oxide semiconductor back-end-of-line compatible processing temperatures. Potential applications in embedded nonvolatile memory, however, require ferroelectric materials to switch at relatively low voltages. One approach to achieving a lower switching voltage is to significantly reduce the Al1−xScxN thickness. In this work, ferroelectric behavior in 5–27 nm films of sputter deposited Al0.72Sc0.28N has been studied. We find that the 10 kHz normalized coercive field increases from 4.4 to 7.3 MV/cm when reducing the film thickness from 27.1 to 5.4 nm, while over the same thickness range, the characteristic breakdown field of a 12.5 μm radius capacitor increases from 8.3 to 12.1 MV/cm. The 5.4 nm film demonstrates ferroelectric switching at 5.5 V when excited with a 500 ns pulse and a switching speed of 60 ns.
This paper presents a K-band bulk acoustic wave (BAW) resonator constructed from an Al 0.72 Sc 0.28 N periodically poled piezoelectric film. The resonators exhibited dominant resonance responses around 20 GHz, approximately four times higher than the resonance frequencies of similar unpoled devices fabricated on the same wafer. Resonators with a quality factor ( Qp ) of 160 and an electromechanical coupling ( k 2t ) of 8.23% were achieved. The figure of merits (defined as FoMI = k 2t Qp and FoMII = fp FoMI ×10 -9 ) of the resonator are 13.2 and 274 which are higher than most reported acoustic resonators operating at K-band (18 GHz to 27 GHz) or higher frequency. The experimental results suggest that periodically poled BAW resonators are promising for emerging RF filter and oscillator applications at K-band frequencies.
This Letter presents oriented growth and switching of thin (∼30 nm) co-sputtered ferroelectric (FE) aluminum scandium nitride (AlScN) films directly on degenerately doped 4H silicon carbide (SiC) wafers. We fabricate and test metal ferroelectric semiconductor capacitors, comprising of Al/Al0.68Sc0.32N/4H-SiC. Our devices exhibit asymmetric coercive electric field values of −5.55/+12.05 MV cm−1 at 100 kHz for FE switching, accounting for the voltage divided by the depletion region of the semiconducting SiC substrate under positive voltages. Furthermore, the FE AlScN exhibits a remanent polarization of 110 ± 2.8 μC cm−2, measured via a voltage-pulsed positive-up negative-down measurement. We further investigate the reliability of the reported devices, revealing an endurance of ∼3700 cycles and a retention time of 9.5 × 105 s without any significant loss of polarization. Our findings demonstrate the bipolar switching of high-quality thin Al0.68Sc0.32N films on doped SiC substrates enabling monolithic integration of nonvolatile memory with SiC-based logic devices appropriate for high temperature operation as well as for high-power switching, memory, and sensing applications.
9 August 2024 in IEEE Transactions on Electron Devices
This article presents 19-GHz bulk acoustic wave (BAW) resonators realized in a periodically poled piezoelectric film (P3F) microfabricated in a commercial XBAW process. The polarization of the three layers comprising the P3F film are realized via a combination of as-grown (two-layer) and electrically poled (one-layer) aluminum scandium nitride (AlScN). To improve the series ( ${Q}_{s}$ ) and maximum ( ${Q}_{\max }$ ) quality factors, the device is constructed by connecting two-BAW resonators in series, which lowers the effect of the via resistance when compared with a traditional single BAW. Resonators achieved ${Q}_{\max }$ of 531 (with ${Q}_{s}$ of 348 and ${Q}_{p}$ of 264) and ${\text {FoM}}_{{os}}$ (defined as ${\text {FoM}}_{{os}} = {{f}_{{s},{p}} {Q}}_{{s},{p}} \times {{10}}^{-{9}}$ , where ${Q}_{{s},{p}}$ is the quality factor at series ( ${f}_{s}$ ) or parallel ( ${f}_{p}$ ) resonance frequency) of 6542 at 18.8-GHz frequency, which is higher than most of the state-of-the-art piezoelectric BAW resonators operating at similar and higher frequencies. The experimental results indicate that the P3F BAW resonators are promising for applications in emerging RF communication systems.
27 June 2025 in IEEE Microwave and Wireless Technology Letters
This letter presents a highly selective bulk acoustic wave (BAW) filter operating at 11.9 GHz, fabricated with periodically poled piezoelectric film (P3F) aluminum scandium nitride (AlScN) technology. The metric used in determining selectivity is the 20-dB shape factor, defined as the ratio of the 20-dB to 3-dB filter bandwidth (BW). With a 20-dB shape factor of 1.71 and a minimum insertion loss (IL) of 1.5 dB, this filter is suitable for RF filtering applications that require efficient spectrum utilization or mitigation of near band interference.
29 December 2023 in Journal of Microelectromechanical Systems
We report a frequency tunable Lamb wave piezoelectric resonator using an Al $_{0.7}$ Sc $_{0.3}$ N thin film. The frequency tuning of the resonator is demonstrated by its stiffness manipulation which is achieved by terminating the tuning electrodes (TE) with a variable capacitor. Resonators with 2, 3, 4, and 5 TE were fabricated and characterized. The highest tuning range of 24,694 ppm was achieved for the resonator with 5 TE. Whereas the best insertion loss of approximately $-$ 6 dB was demonstrated by the resonator with 2 TE. The tunning range (17,783 $\sim$ 24,694 ppm) achieved by the Al $_{0.7}$ Sc $_{0.3}$ N resonators is higher than zero power demonstrations in prior studies. The resonators are fabricated using a commercial XBAW $^{\mathrm{TM}}$ process making it suitable for mass production without any needed exotic processing steps or materials. The resonators are promising for miniaturization of modern wireless communications system by providing a platform to process multi-channel frequencies with reduced components. 2023-0193