Surface Acoustic Wave (SAW) devices featuring Aluminum Scandium Nitride (AlScN) on a 4H-Silicon Carbide (SiC) substrate, offer a unique blend of high sound velocity, low thermal resistance, substantial piezoelectric response, simplified fabrication, as well as suitability for high-temperature and harsh environment operation. This study presents high-frequency SAW resonators employing AlScN thin films on SiC substrates, utilizing the second SAW mode (referred to as the Sezawa mode). The resonators achieve remarkable performance, boasting a K $^{\mathbf{2}}$ value of 5.5% at 4.7 GHz and a maximum Bode-Q (Q $_{\mathbf{max}}$ ) of 911 at 4.3 GHz, outperforming previous AlScN SAW devices. Additionally, a SAW resonator with a 0.96 $\mu$ m wavelength attains 5.9 GHz frequency with K $^{\mathbf{2}}$ of 4.0% and Q $_{\mathbf{max}}$ of 762. Our study underscores the potential of the AlScN on SiC platform for advanced radio-frequency applications.2024-0075
This Letter presents oriented growth and switching of thin (∼30 nm) co-sputtered ferroelectric (FE) aluminum scandium nitride (AlScN) films directly on degenerately doped 4H silicon carbide (SiC) wafers. We fabricate and test metal ferroelectric semiconductor capacitors, comprising of Al/Al0.68Sc0.32N/4H-SiC. Our devices exhibit asymmetric coercive electric field values of −5.55/+12.05 MV cm−1 at 100 kHz for FE switching, accounting for the voltage divided by the depletion region of the semiconducting SiC substrate under positive voltages. Furthermore, the FE AlScN exhibits a remanent polarization of 110 ± 2.8 μC cm−2, measured via a voltage-pulsed positive-up negative-down measurement. We further investigate the reliability of the reported devices, revealing an endurance of ∼3700 cycles and a retention time of 9.5 × 105 s without any significant loss of polarization. Our findings demonstrate the bipolar switching of high-quality thin Al0.68Sc0.32N films on doped SiC substrates enabling monolithic integration of nonvolatile memory with SiC-based logic devices appropriate for high temperature operation as well as for high-power switching, memory, and sensing applications.
15 October 2025 in Journal of Materials Chemistry A
We prepare and isolate propylammonium poly-Se(-Te) precursors from a thiol-amine solvent system to produce high quality Se and Se–Te alloy films with bandgaps tunable from 1.2 eV to 1.86 eV for applications in photovoltaics.