1 January 2024 in AIP Advances
In this research, the production of carbon fiber composite (CFC) with epoxy resin was carried out for biomedical application. The surface of the carbon fibers was previously oxidized with concentrated nitric acid at a temperature of 100 °C for 30–120 min to create a rough surface impression on the carbon fibers to enhance interfacial bonding in the composite, increase surface area, and reduce surface tension. The carbon fiber/epoxy composite was fabricated using the vacuum assisted resin infusion method. Characterization of the oxidized carbon fibers and the composite products was performed using a digital microscope, scanning electron microscope, and Fourier Transform Infrared (FTIR) analysis. FTIR analysis results indicated that the carbon fiber oxidation process introduced new chemical functional groups, such as –CN and –CO groups. Mechanical characterizations included tensile testing of non-oxidized and oxidized carbon fiber and tensile testing of carbon fiber/epoxy composite. The results showed that the composite formed from oxidized carbon fibers/epoxy resin exhibited higher tensile strength compared to non-oxidized CFC. The longer the carbon fiber oxidation process, the higher the tensile strength values obtained.
3 June 2025 in Materials Technology
3 March 2025 in Journal of The Institution of Engineers (India): Series D
17 September 2026 in Polymer Engineering & Science
RHRegha Arthakayazha Ninggar Hade
Regha Arthakayazha Ninggar Hade
2 October 2026 in Engineering, Technology & Applied Science Research
This study investigates the effects of post-curing temperature and duration on the mechanical performance of Empty Fruit Bunches (EFB) fiber-reinforced composite panels fabricated by vacuum bagging. The study focuses on optimizing the post-curing conditions for vacuum-bagged EFB fiber composites, whose curing behavior differs from that of compression-molded composites due to variations in resin infiltration, void formation, and fiber wetting. The composites were manufactured under a vacuum pressure of 70 cmHg using a resin-to-fiber volume ratio of 60:40. Flexural and impact tests were conducted, and the experimental data were analyzed using Response Surface Methodology (RSM). The developed Two-Factor Interaction (2FI) models were statistically significant (p = 0.0064 for flexural strength and p = 0.0256 for impact strength). Confirmation tests showed good agreement between the predicted and experimental values, with errors of 6.13% and 14.29%, respectively. The optimum condition within the investigated range was 100 °C for 40 min, resulting in a flexural strength of 90.84 MPa and an impact strength of 43.89 kJ/m². SEM observations showed improved fiber–matrix adhesion and reduced void content under the optimum condition. These results indicate that higher post-curing temperatures combined with shorter durations can improve polymer cross-linking while limiting thermal damage. The findings guide selecting post-curing conditions for EFB fiber composites fabricated by vacuum bagging.