Herein, a semiautonomous robot control system for mandible reconstruction surgery is proposed. To reconstruct a segmental defect of the mandible caused by cancerous tissue, a piece of matched fibula bone is often segmented and used to replace the removed mandible section. Herein, to provide guidance to the surgeon during fibula segmentation according to the reconstruction surgical plan and improve the fibula bone cutting accuracy, an admittance‐controlled robotic assistant incorporating 3D augmented reality (AR) visualization and haptic virtual fixtures (VFs) is proposed. The admittance controller is used to reduce the surgeon's hand tremor. VF and AR are used to provide haptic and visual guidance to the surgeon, respectively. A feasibility study is conducted through a comparison of fibula osteotomies when performed with image‐guided surgery, AR‐guided surgery, VF‐guided robot‐assisted surgery, and AR‐ and VF‐guided robot‐assisted surgery. Experimental results show the effectiveness of the proposed admittance‐controlled robotic assistant with AR and VF compared with the other three methods. The proposed method is found to be able to increase precision of the osteotomized segments with a lower average linear variation of 1.04 ± 0.79 mm and a lower average angular variation of 1.83 ± 1.85° compared with the virtual preoperative plan.
Flexible and lightweight surgical tools have the potential to significantly increase the dexterity of mechatronics-assisted surgical systems for minimally invasive surgeries. However, the control of a mechatronics-assisted system with the link and joint flexibility is quite challenging and needs to be studied. In this paper, a bilateral impedance-controlled master-slave teleoperation system is considered, where the slave (surgical) robot is flexible. Two reference impedance models are designed for the master and slave robots to control the mechatronics-assisted system. Also, depending on different feedback and feedforward signals, four cases are distinguished. To obtain better transparency of the system, the tuning rules for the impedance parameters for each case are presented and the corresponding transparency measures are analyzed and compared. As a result, by appropriately adjusting the impedance model parameters, ideal position and force tracking can be attained for a teleoperation system with a flexible surgical robot. The theoretical findings are validated in simulations.