In low-dose-rate permanent-seed (LDR-PS) implant brachytherapy, it is crucial to predict the movement of internal target points (planned radioactive seed locations) under the effect of external forces. Accurate prediction of the target locations is critical for precise seed implantation, as inaccurate seed implantation diminishes the effectiveness of radiotherapy. Therefore, developing a model to simulate tissue dynamics is necessary. All physics-based tissue models have model-reality mismatches due to unmodeled dynamics, a problem which should be addressed. In this work, we propose the KF-ADMM method as a solution, which compensates for a portion of unmodeled dynamic terms existing in the alternating direction method of multipliers (ADMM)-based projective dynamics (PD) tissue simulator through Kalman filtering. This method provides accurate predictions of the location of inner tissue points with an error of around 0.8 mm. Experiments on a breast tissue phantom are performed to evaluate the efficacy of the proposed approach. According to the results, the accuracy of tissue deformation is enhanced by $52 \%$ on average, and the convergence rate is accelerated compared to an ADMM-based PD tissue simulator.
Herein, a semiautonomous robot control system for mandible reconstruction surgery is proposed. To reconstruct a segmental defect of the mandible caused by cancerous tissue, a piece of matched fibula bone is often segmented and used to replace the removed mandible section. Herein, to provide guidance to the surgeon during fibula segmentation according to the reconstruction surgical plan and improve the fibula bone cutting accuracy, an admittance‐controlled robotic assistant incorporating 3D augmented reality (AR) visualization and haptic virtual fixtures (VFs) is proposed. The admittance controller is used to reduce the surgeon's hand tremor. VF and AR are used to provide haptic and visual guidance to the surgeon, respectively. A feasibility study is conducted through a comparison of fibula osteotomies when performed with image‐guided surgery, AR‐guided surgery, VF‐guided robot‐assisted surgery, and AR‐ and VF‐guided robot‐assisted surgery. Experimental results show the effectiveness of the proposed admittance‐controlled robotic assistant with AR and VF compared with the other three methods. The proposed method is found to be able to increase precision of the osteotomized segments with a lower average linear variation of 1.04 ± 0.79 mm and a lower average angular variation of 1.83 ± 1.85° compared with the virtual preoperative plan.
2 November 2017 in IEEE Robotics and Automation Letters
Needle deflection during certain minimally invasive percutaneous procedures, such as prostate biopsy or brachytherapy, is undesired and can be reduced through the use of feedback control. This letter uses a depth-dependent reduced-order three-dimensional (3-D) nonholonomic model of needle tip motion to propose a needle deflection controller that works in a surgeon-in-the-loop fashion, where the surgeon is in charge of needle insertion, and the feedback controller is responsible for keeping the needle on its desired trajectory. The controller is based on a continuous-time control law that asymptotically brings needle deflection to zero and is shown to remain effective even when the magnitude of the needle rotation velocity is limited. Limiting of the needle rotational velocity is due to practical considerations such as to reduce tissue damage during insertion and to show a measure of velocity-independence of the controller when high insertion speeds would require unfeasibly fast rotations. The velocity-limited controller is evaluated in three different ex vivo tissue samples in a total of 30 needle insertion trials using real-time needle deflection measurements from ultrasound images. The ex vivo results show an average absolute needle tip deflection of 0.54 mm away from the target location at a depth of 120 mm, and an average needle tip deflection of 0.36 mm away from the desired target axis throughout the entire insertion length.
19 March 2019 in Journal of Medical Robotics Research
Background: The COVID-19 pandemic and concomitant governmental responses have created the need for innovative and collaborative approaches to deliver services, especially for populations that have been inequitably affected. In Alberta, Canada, two novel approaches were created in Spring 2020 to remotely support patients with complex neurological conditions and rehabilitation needs. The first approach is a telehealth service that provides wayfinding and self-management advice to Albertans with physical concerns related to existing neurological or musculoskeletal conditions or post-COVID-19 recovery needs. The second approach is a webinar series aimed at supporting self-management and social connectedness of individuals living with spinal cord injury. Objective: The study aims to evaluate the short- and long-term impacts and sustainability of two virtual modalities (telehealth initiative called Rehabilitation Advice Line [RAL] and webinar series called Alberta Spinal Cord Injury Community Interactive Learning Seminars [AB-SCILS]) aimed at advancing self-management, connectedness, and rehabilitation needs during the COVID-19 pandemic and beyond. Methods: We will use a mixed-methods evaluation approach. Evaluation of the approaches will include one-on-one semistructured interviews and surveys. The evaluation of the telehealth initiative will include secondary data analyses and analysis of call data using artificial intelligence. The evaluation of the webinar series will include analysis of poll questions collected during the webinars and YouTube analytics data. Results: The proposed study describes unique pandemic virtual modalities and our approaches to evaluating them to ensure effectiveness and sustainability. Implementing and evaluating these virtual modalities synchronously allows for the building of knowledge on the complementarity of these methods. At the time of submission, we have completed qualitative and quantitative data collection for the telehealth evaluation. For the webinar series, so far, we have distributed the evaluation survey following three webinars and have conducted five attendee interviews. Conclusions: Understanding the impact and sustainability of the proposed telehealth modalities is important. The results of the evaluation will provide data that can be actioned and serve to improve other telehealth modalities in the future, since health systems need this information to make decisions on resource allocation, especially in an uncertain pandemic climate. Evaluating the RAL and AB-SCILS to ensure their effectiveness demonstrates that Alberta Health Services and the health system care about ensuring the best practice even after a shift to primarily virtual care.
Prostate brachytherapy is a treatment for prostate cancer; during the planning of the procedure, ultrasound images of the prostate are taken. The prostate must be segmented out in each of the ultrasound images, and to assist with the procedure, an autonomous prostate segmentation algorithm is proposed. The prostate contouring system presented here is based on a novel superpixel algorithm, whereby pixels in the ultrasound image are grouped into superpixel regions that are optimized based on statistical similarity measures, so that the various structures within the ultrasound image can be differentiated. An active shape prostate contour model is developed and then used to delineate the prostate within the image based on the superpixel regions. Before segmentation, this contour model was fit to a series of point-based clinician-segmented prostate contours exported from conventional prostate brachytherapy planning software to develop a statistical model of the shape of the prostate. The algorithm was evaluated on nine sets of in vivo prostate ultrasound images and compared with manually segmented contours from a clinician, where the algorithm had an average volume difference of 4.49 mL or 10.89%.